N74F243D,623 by NXP Semiconductors | Logic ICs

Image shown is a representation only.

Manufacturer	NXP Semiconductors
Manufacturer's Part Number	N74F243D,623
Description	BUS TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet	N74F243D,623 Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Output Characteristics:	3-STATE
Maximum Seated Height:	1.75 mm
Minimum Supply Voltage (Vsup):	4.5 V
Maximum Power Supply Current (ICC):	90 mA
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	14
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	TTL
JESD-30 Code:	R-PDSO-G14
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Width:	3.9 mm
Moisture Sensitivity Level (MSL):	1
No. of Bits:	4
Other Names:	N74F243D-T N74F243D-T-ND 933778230623
Output Polarity:	TRUE
No. of Ports:	2
Load Capacitance (CL):	50 pF
Logic IC Type:	BUS TRANSCEIVER
JESD-609 Code:	e4
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Length:	8.65 mm
Propagation Delay (tpd):	6.5 ns
Nominal Supply Voltage / Vsup (V):	5
Additional Features:	WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
Family:	F/FAST
Terminal Pitch:	1.27 mm
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	5.5 V

Popular Products

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;

Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;