DIP Comparators 109

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LM139AJ/PB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		4 mV	300 nA	No	4	BIPOLAR		2 mA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	300 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.77 in (19.56 mm)
LM339N/PB	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		9 mV	400 nA	No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.18 mm)
LP339N/PB	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		9 mV	40 nA	No	4	BIPOLAR					5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)		8 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)		e0			0.755 in (19.18 mm)
LM529CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR						5,±10 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1			No	e0
MAX905CPD	Maxim Integrated	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-6 V	1.5 mV	10 uA	No	1			24 mA	-5 V		5 V	5/GND,-5/-5.2 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	2 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T14		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX906CPE	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V	2.5 mV	10 uA	No	1			48 mA	-5 V		5 V	5/GND,-5/-5.2 V	In-Line	DIP16,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	2 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T16		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
TLC354MN	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		10 mV	20 nA	No	4	CMOS		400 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.76 in (19.305 mm)
LM111JG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	No	1	BIPOLAR		6 mA	-15 V	Tube	15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	115 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.377 in (9.58 mm)
MAX971CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	1			3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)		No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX971EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	1			3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)		No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX972CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	2			3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)		No	e0			0.369 in (9.375 mm)
MAX972EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	2			3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX974EPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	4			8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MAX981EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	1			3.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX982CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	2			5.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		300 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)		No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX982EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	2			5.8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX984EPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	0 V	10 mV		No	4			8 μA	0 V		3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		300 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
TLC3702MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		10 mV	30 nA	No	2	CMOS	MIL-STD-883	40 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.377 in (9.58 mm)
TLC3704MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed	-18 V	10 mV	30 nA	No	4	CMOS					5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		2.7 µs	Push-Pull	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
AD790JN	Analog Devices	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-18 V	1.5 mV	6.5 uA	No	1	BIPOLAR			-15 V		15 V	5,5/±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	5 uA	45 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8		0.175 in (4.44 mm)	0.3 in (7.62 mm)	No	e0
AD790SQ	Analog Devices	Comparator	Military	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed	-18 V	1.5 mV	7 uA	No	1	BIPOLAR			-15 V		15 V	5,5/±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	5 uA	60 ns	Push-Pull	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0
LT1011ACJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed	-18 V	1.5 mV	50 nA	No	1	BIPOLAR		4 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	25 nA	150 ns		0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
MAX907CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	No	2	BIPOLAR		1.2 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX907EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	No	2	BIPOLAR		1.2 mA			5 V	5 V	In-Line	DIP8,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX908CPD	Maxim Integrated	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	No	4	BIPOLAR		1.2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	45 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.75 in (19.05 mm)
MAX908EPD	Maxim Integrated	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		3.5 mV	500 nA	No	4	BIPOLAR		1.2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	45 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.75 in (19.05 mm)
MAX921CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	1	CMOS		4 μA			3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX921EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	1	CMOS		4 μA			3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX922CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS		4 μA			3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
MAX922EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS		4 μA			3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX923CPA	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS		6 μA			3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX923EPA	Maxim Integrated	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	2	CMOS		6 μA			3 V	±1.25/±5.5/2.5/11 V	In-Line	DIP8,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.369 in (9.375 mm)
MAX924CPE	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	4	CMOS		9 μA			3 V	3/5 V	In-Line	DIP16,.3	Comparators	12 V	0.1 in (2.54 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.175 mm)
MAX924EPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		No	4	CMOS		9 μA			3 V	3/5 V	In-Line	DIP16,.3	Comparators	12 V	0.1 in (2.54 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.175 mm)
MAX516ACNG	Maxim Integrated	Comparator	Commercial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		10 mV	400 nA	No	4	CMOS		10 mA			4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	800 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX516AENG	Maxim Integrated	Comparator	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		10 mV	400 nA	No	4	CMOS		10 mA			4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	800 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MAX516BCNG	Maxim Integrated	Comparator	Commercial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		15 mV	400 nA	No	4	CMOS		10 mA			4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	70 °C (158 °F)	300 nA	800 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MAX516BENG	Maxim Integrated	Comparator	Industrial	Through-Hole	24	DIP	Rectangular	Plastic/Epoxy		15 mV	400 nA	No	4	CMOS		10 mA			4.75 V	5/15 V	In-Line	DIP24,.3	Comparators	17 V	0.1 in (2.54 mm)	85 °C (185 °F)	300 nA	800 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T24	1	0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)
MXL1016CN8	Maxim Integrated	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-7 V	3.5 mV	13 uA	No	1	TTL		35 mA	-5 V		5 V	5/±5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	10 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.369 in (9.375 mm)
TL820MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR	38535Q/M;38534H;883B						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
AD9686TQ	Analog Devices	Comparator	Military	Through-Hole	16	DIP	Rectangular	Ceramic		3 mV		No		BIPOLAR		35 mA				5,-6 V	In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	10 uA	7 ns		-55 °C (-67 °F)	Tin Lead	Dual	R-XDIP-T16				No	e0
TS374CN	STMicroelectronics	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	12 mV	150 pA	No	4	CMOS		1 mA	0 V		5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		600 ns	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
TS374IN	STMicroelectronics	Comparator	Automotive	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	0 V	12 mV	300 pA	No	4	CMOS		1 mA	0 V		5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		600 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T14		0.201 in (5.1 mm)	0.3 in (7.62 mm)	No	e3
TS372CN	STMicroelectronics	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	12 mV	150 pA	No	2	CMOS		1 mA	0 V		5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		600 ns	Open-Drain	0 °C (32 °F)	Matte Tin	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e3
TS372IN	STMicroelectronics	Comparator	Automotive	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	12 mV	300 pA	No	2	CMOS		1 mA	0 V		5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		600 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e3
AD8561AN	Analog Devices	Comparator	Industrial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	-7 V	7 mV		No	1	BIPOLAR			-5 V		5 V	3/5/±5 V	In-Line	DIP8,.3	Comparators	7 V	0.1 in (2.54 mm)	85 °C (185 °F)		7 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T8		0.21 in (5.33 mm)	0.3 in (7.62 mm)	No	e0			0.389 in (9.88 mm)
MAX912CPE	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-7 V	3 mV	8 uA	No	2	BIPOLAR			-5 V		5 V	5/±5 V	In-Line	DIP16,.3	Comparators	7 V	0.1 in (2.54 mm)	70 °C (158 °F)	5 uA	10 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T16		0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0	20 s	240 °C (464 °F)	0.755 in (19.175 mm)
MAX912EPE	Maxim Integrated	Comparator	Industrial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-7 V	3 mV	8 uA	No	2	BIPOLAR			-5 V		5 V	5/±5 V	In-Line	DIP16,.3	Comparators	7 V	0.1 in (2.54 mm)	85 °C (185 °F)	5 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDIP-T16	1	0.18 in (4.572 mm)	0.3 in (7.62 mm)	No	e0		245 °C (473 °F)	0.755 in (19.175 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.