All Microelectronic Parts & Components

Active Filters 6,775

• Active Filters

HMC892ALP5E

Analog Devices

Analog Devices' HMC892ALP5E is a 32-terminal switched capacitor active filter in a square chip carrier package. With response type as band pass, it operates b/w -40 to 85°C and has a peak reflow temperature of 260°C. Ideal for industrial applications requiring precise filtering in compact spaces.

MAX274AENG+

Analog Devices

Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Maximum Supply Current (Isup): 30 mA;

MAX7409EUA+

Analog Devices

Analog Devices' MAX7409EUA+ is a CMOS active filter with 1.5 mA Isup, operating b/w -40 to 85°C. It features a lowpass BESSEL response type, 5 poles and zeros, and a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for industrial applications requiring precise signal filtering in compact spaces.

MAX291ESA+T

Analog Devices

SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;

MAX7409EUA+T

Analog Devices

Analog Devices' MAX7409EUA+T is a CMOS active filter with 5 poles and zeros, operating b/w -40 to 85°C. It has a lowpass Bessel response type with a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for industrial applications requiring switched capacitor filters in compact SOT-23 packages.

Amplifiers 153,077

• Buffer Amplifiers

• Comparators

• Instrumentation Amplifiers

• Isolation Amplifiers

• Operational Amplifiers (Op Amps)

• Other Function Amplifiers

• Sample & Hold ICs

NCV33272ADR2G

Onsemi

NCV33272ADR2G by Onsemi is a dual operational amplifier with a max input offset voltage of 2500uV and nominal common mode reject ratio of 100dB. It operates at temperatures ranging from -40 to 125 °C and is ideal for automotive applications due to its AEC-Q100 screening level. With a small outline package style, it offers a min slew rate of 8V/us and unity gain bandwidth of 5500kHz.

MAX4291EUK+T

Analog Devices

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

TS391ILT

STMicroelectronics

STMicroelectronics' TS391ILT is a comparator with 9000uV max input offset voltage, 0.4uA max average bias current, and 5V nominal voltage. Ideal for automotive applications due to its bipolar technology, -40 to 125 °C operating temp range, and open-collector output type.

LM2903DMR2G

Onsemi

LM2903DMR2G by Onsemi is a comparator with 15000uV max input offset voltage and 0.5uA max average bias current. It operates at -40 to 105 °C, has open-collector output type, and requires 5V nominal voltage. Ideal for industrial applications due to its small outline package style and dual terminal position.

AD8615AUJZ-REEL

Analog Devices

AD8615AUJZ-REEL by Analog Devices is a CMOS Operational Amplifier with low-offset (0.8 uV) and low-bias (0.00055 uA) features. Ideal for automotive applications, it offers high voltage gain (1500000) and operates at temperatures ranging from -40 to 125 °C. This Op Amp has a compact design with small outline and thin profile, making it suitable for space-constrained environments.

MAX9618AXA+T

Analog Devices

Analog Devices' MAX9618AXA+T is an operational amplifier with low-offset voltage of 25uV, micropower consumption of 0.00058uA, and high common mode rejection ratio of 116dB. Ideal for automotive applications due to its compact size, wide temperature range (-40 to 125°C), and low-bias current requirements.

LM239DTBR2G

Onsemi

LM239DTBR2G by Onsemi is a comparator with 4 functions, featuring a max input offset voltage of 9000uV and max average bias current of 0.4uA. It operates at a nominal voltage of 5V, making it suitable for applications requiring precise voltage comparisons in commercial-grade environments.

OPA627BP

Texas Instruments

OPA627BP by Texas Instruments is an Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 100uV, min slew rate of 40V/us, and nominal unity gain bandwidth of 16MHz. Ideal for precision applications requiring high voltage supplies up to +-15V in a compact through-hole package.

MAX44242AKA+T

Analog Devices

MAX44242AKA+T by Analog Devices is a dual operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 800uV, nominal unity gain bandwidth of 10MHz, and operates in automotive temperature grade. Ideal for applications requiring precise signal amplification in compact spaces.

TLV2460IDBVR

Texas Instruments

TLV2460IDBVR by Texas Instruments is a CMOS Operational Amplifier with 2200uV Max Input Offset Voltage, 80dB Nominal CMRR, and 5200kHz Unity Gain Bandwidth. Ideal for automotive applications due to its low profile design and wide temperature range of -40 to 125°C.

ADA4084-2ARZ-RL

Analog Devices

ADA4084-2ARZ-RL by Analog Devices is a dual operational amplifier with low offset voltage of 250uV and bias current of 0.45uA. Ideal for automotive applications, it offers high common mode rejection ratio of 124dB and unity gain bandwidth of 15.9MHz in a small outline package.

PGA205AP

Texas Instruments

PGA205AP by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 175uV and max average bias current of 0.005uA. With a nominal bandwidth of 1MHz, it is ideal for industrial applications requiring precise signal amplification. The amplifier operates within a temperature range of -40 to 85°C and has a max supply current of 7.5mA.

MCP6021T-E/OT

Microchip Technology

MCP6021T-E/OT by Microchip: Op Amp with 2500uV Max Input Offset Voltage, 90dB CMRR, and 10000kHz Unity Gain Bandwidth. Ideal for automotive applications due to low-bias, TS16949 screening, and Vsup of 3/5V. Compact design with small outline package style and dual terminal position.

AD822BRZ-REEL7

Analog Devices

AD822BRZ-REEL7 by Analog Devices is a dual operational amplifier with low bias current (0.000012 uA) and high common mode rejection ratio (90 dB). Ideal for industrial applications, it operates at temperatures ranging from -40 to 85 °C and offers micropower consumption. The package style is small outline, making it suitable for surface mount designs.

HA9P5320-5Z

Renesas Electronics

SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MCP6042T-I/MS

Microchip Technology

MCP6042T-I/MS by Microchip: Op Amp with 3000uV Max Input Offset Voltage, 80dB CMRR, and 14kHz Unity Gain Bandwidth. Ideal for industrial applications requiring low-bias current and micropower operation in a compact square package. Supports surface mount assembly with a thin profile and operates b/w -40 to 85°C temperature range.

AD8610ARMZ-REEL

Analog Devices

AD8610ARMZ-REEL by Analog Devices is an Operational Amplifier with 850uV Max Input Offset Voltage, 40 V/us Min Slew Rate, and 95 dB Nominal CMRR. Ideal for automotive applications due to its low-offset and low-bias characteristics. It operates at -40 to 125 °C with a supply voltage of +-5/+-13 V.

LMV551MFX/NOPB

Texas Instruments

LMV551MFX/NOPB by Texas Instruments is a micropower operational amplifier with a max input offset voltage of 4500 uV and a nominal voltage of 3 V. It is ideal for automotive applications due to its low profile package shape, BICMOS technology, and wide operating temperature range from -40 to 125 °C. The op amp offers high common mode rejection ratio, low bias current, and frequency compensation for precision signal processing in compact designs.

AD820ANZ

Analog Devices

AD820ANZ by Analog Devices is an operational amplifier with a max input offset voltage of 1500 uV, 80 dB common mode reject ratio, and 1900 kHz unity gain bandwidth. Widely used in industrial applications for its low-bias, micropower features, and voltage-feedback architecture.

MCP6001T-E/OT

Microchip Technology

MCP6001T-E/OT by Microchip Technology is a CMOS Operational Amplifier with 5 terminals, Vsup of 2-5V, and low power consumption at 0.17mA. It has a wide temperature range from -40 to 125°C and is ideal for automotive applications due to its small size and high common mode rejection ratio of 76dB.

Batteries 4,054

• Batteries

LS14250CNA

Saft Sa

LS14250CNA by Saft Sa is a 3.6V LITHIUM-THIONYL CHLORIDE battery with 1.2Ah capacity, ideal for low-power devices. With a cut-off voltage of 2V, it operates b/w -60°C to 85°C temperatures. Measuring at 25.15mm x 14.55mm and weighing 8.9g, it's approved by IEC and UL for various applications.

CR1632.IB

The Swatch Group

CR1632.IB by The Swatch Group is a 3V lithium manganese dioxide battery with 0.125 Ah capacity. Measuring 16mm in diameter and 3.2mm in height, it weighs 1.8g and operates b/w -40°C to 85°C. Ideal for applications requiring a reliable power source in compact devices like watches or small electronics.

VL-2020/HFN

Panasonic

Panasonic VL-2020/HFN battery is a 3V secondary type with 0.02 Ah capacity. With dimensions of 20mm diameter and 2mm height, it's ideal for small electronic devices. Operating b/w -20 to 60 °C, its chemical composition includes VANADIUM PENTOXIDE LITHIUM.

RRC2040

RRC power solutions

RRC2040 by Rrc Power Solutions is a 10.8V lithium-ion battery with a capacity of 3.35Ah. It has CE, UN, and UL approvals and is suitable for various applications requiring a compact and lightweight power source.

381

Renata Sa

Renata Sa 381 battery is a primary cell with 1.55V voltage and 0.05Ah capacity. With Zn/MnO2 chemistry, it operates b/w -10°C to 60°C, making it ideal for small devices like watches due to its compact size of 11.6mm diameter and 2.05mm height.

LS14250

Saft Sa

LS14250 by Saft Sa is a 3.6V LITHIUM-THIONYL CHLORIDE battery with 1.2 Ah capacity, ideal for low-power devices. It has a cut-off voltage of 2V and operates b/w -60°C to 85°C, making it suitable for industrial sensors and memory backup applications. UL approved, this 1/2AA size battery weighs 8.9g with dimensions of 25.15mm x 14.55mm (H x D).

BR1225

Panasonic

Panasonic BR1225 is a 3V lithium battery with 0.048 Ah capacity. With -30 to 85 °C operating range, it's ideal for small devices like watches and calculators. Measuring 12.5mm in diameter and 2.5mm in height, it weighs 0.8g and has a button(-) terminal type.

BR-2477A/FBN

Panasonic

Panasonic BR-2477A/FBN is a 3V primary battery with 1Ah capacity. With LITHIUM POLY-CARBONMONOFLOURIDE chemistry, it operates b/w -40°C to 125°C. Ideal for low-power devices like sensors, meters, and memory backup due to its compact size of 24.6mm diameter and 7.6mm height.

CR2450N

Renata Sa

Renata Sa's CR2450N battery is a LITHIUM primary cell with 3V voltage, 0.54 Ah capacity. With -40 to 85 °C operating range, it suits small devices like watches due to its compact size of 24.5x5 mm and weight of 5.9 g.

CR2477N

Renata Sa

Renata Sa's CR2477N battery is a 3V lithium primary cell with 0.95 Ah capacity. With dimensions of 24.5mm diameter and 7.7mm height, it weighs 8.3g and operates b/w -40°C to 85°C. Ideal for devices requiring a reliable power source in various temperatures and conditions.

NP2-12

Enersys

Enersys NP2-12 is a 12V lead calcium alloy battery with 2Ah capacity. It operates b/w -15 to 50 °C and has approvals from IEC and UL. Ideal for applications requiring a compact, lightweight secondary battery with F1 terminals, such as portable electronics or emergency lighting systems.

LS14500

Saft Sa

Saft Sa LS14500 AA battery with 2.6Ah capacity, 3.6V voltage, and LITHIUM-THIONYL CHLORIDE composition. Ideal for low-temp applications (-60°C) requiring a reliable power source with approvals from IEC and UL. Features button(+) and flat(-) terminals, weighing 17g at 50.28mm height and 14.62mm diameter.

LS33600

Saft Sa

Saft Sa LS33600 battery, 3.6V, 17Ah capacity, D size. Ideal for industrial applications with -60 to 85 °C operating range. Features Lithium-Thionyl Chloride chemistry and UL approval.

CR2450

Panasonic

Panasonic CR2450 battery, with 3V voltage and 0.62 Ah capacity, is a lithium manganese dioxide cell. Measuring 24.5mm in diameter and 5mm in height, it operates b/w -30°C to 85°C. Ideal for applications requiring a primary button-type battery with a flat positive terminal.

MS614SE-FL28E

Seiko Instruments Usa

MS614SE-FL28E by Seiko Instruments Usa is a 3V lithium battery with a capacity of 0.0034 Ah. It has a cut-off voltage of 2V, suitable for applications requiring small, lightweight power sources. With dimensions of 6.8mm diameter and 1.4mm height, it is ideal for compact electronic devices like wearables or IoT sensors.

364

Renata Sa

Renata Sa's 364 battery is a primary button cell with a voltage of 1.55V and capacity of 0.019Ah. With dimensions of 2.15mm x 6.8mm, it weighs 0.3g and operates b/w -10°C to 60°C, making it ideal for small electronic devices requiring reliable power supply.

Capacitors 165,539,168

• Capacitor Arrays & Networks

• Fixed Capacitors

• Other Function Capacitors

• Special Function Capacitors

• Trimmer & Variable Capacitors

T58W9476M6R3C0200

Vishay Intertechnology

TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);

TAJD107M016RNJ

KYOCERA AVX

TAJD107M016RNJ by KYOCERA AVX is a 100uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.016mA, and Ripple Current of 200mA. Ideal for applications requiring high capacitance in compact SMT designs with operating temperatures from -55 to 125°C.

C1608X5R1C106M080AB

TDK

The TDK C1608X5R1C106M080AB is a ceramic capacitor with 10uF capacitance and 16V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

C1206X475K4RACTU

KEMET Corporation

KEMET C1206X475K4RACTU is a ceramic capacitor with 4.7uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. It is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and -55 to 125 °C operating temperature range.

WKP222MCPEJ0KR

Vishay Intertechnology

Vishay Intertechnology's WKP222MCPEJ0KR is a ceramic capacitor with 0.0022uF capacitance, rated at 760V AC. It has a radial package style and operates b/w -40°C to 125°C. Ideal for applications requiring high voltage tolerance and reliable performance in various electronic circuits.

CL10B104KB8NNND

Samsung Electro-mechanics

CL10B104KB8NNND by Samsung Electro-mechanics is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high reliability and compact size.

T495D107K016ATE125

KEMET Corporation

KEMET T495D107K016ATE125 is a 100uF, 16V tantalum capacitor with low Tan Delta of 0.08 and ESR of 125mohm. Ideal for applications requiring high ripple current (175.2mA) in compact SMT designs due to its small size (7.3x4.3x2.8mm).

TAJD476K016RNJ

KYOCERA AVX

TAJD476K016RNJ by KYOCERA AVX is a 47uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0075mA, and Ripple Current of 163mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125 °C.

GRT188R61C106KE13D

Murata Manufacturing

Murata Manufacturing's GRT188R61C106KE13D is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X5R temperature characteristics. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 compliance and compact SMT package design.

C2225C105KARACTU

KEMET Corporation

KEMET C2225C105KARACTU is a ceramic capacitor with 1uF capacitance, 250V URdc, and X7R temperature code. Ideal for SMT applications, it has a compact size of 5.6mm x 6.4mm x 1.4mm and operates b/w -55°C to 125°C with ±10% tolerance.

CL10A226MQ8NRNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL10A226MQ8NRNC is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high capacitance and low voltage requirements.

12101C225KAT2A

KYOCERA AVX

12101C225KAT2A by KYOCERA AVX is a ceramic capacitor with 2.2uF capacitance and 100V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in a small form factor.

GRM1885C1H102JA01J

Murata Manufacturing

Murata Manufacturing's GRM1885C1H102JA01J is a ceramic capacitor with 0.001uF capacitance and 50V rated DC voltage. It has a C0G temperature characteristic, -55 to 125 °C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.

GRM21BR61A476ME15K

Murata Manufacturing

Murata Manufacturing's GRM21BR61A476ME15K is a ceramic capacitor with 47uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for surface mount applications in electronics requiring compact, reliable capacitors.

B43890A5475M000

TDK

The TDK B43890A5475M000 is a 4.7uF Aluminum Electrolytic Capacitor with 450V URdc, suitable for applications requiring high ripple current (200mA) and low tan delta (0.24). Its cylindrical package and through-hole mounting make it ideal for industrial electronics.

UMK325BJ106KM-T

Taiyo Yuden

UMK325BJ106KM-T by Taiyo Yuden is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It features X5R temperature characteristics, suitable for applications requiring compact SMT components with high reliability in a wide temperature range from -55°C to 85°C. The rectangular package design with wraparound terminals makes it ideal for surface mounting in various electronic devices.

CGB2A1X5R1A105K033BC

TDK

TDK CGB2A1X5R1A105K033BC is a 0402 SMT ceramic capacitor with 1uF capacitance, 10V URdc, X5R temp code. Ideal for surface mount applications in electronics due to its compact size and high temperature range of -55 to 85°C.

293D156X9035D2TE3

Vishay Intertechnology

Vishay Intertechnology's 293D156X9035D2TE3 is a TANTALUM CAPACITOR with 15uF capacitance and 35V URdc. It features low Tan Delta of 0.06, high ripple current of 184mA, and low leakage current of 0.0053mA. Ideal for applications requiring compact SMT capacitors with high reliability in a wide temperature range from -55°C to 125°C.

T356E106K025AT7301

KEMET Corporation

TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);

CL05A105KO5NNNC

Samsung Electro-mechanics

CL05A105KO5NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, ideal for surface mount applications requiring compact size and high reliability. Its multi-layer design and matte tin terminal finish make it suitable for various electronic devices.

Chip Carrier IC & Component Sockets 967,200

• Chip Carrier IC & Component Sockets

SR3P-05

Idec

Idec's SR3P-05 chip carrier IC socket has 11 RND PIN-SKT contacts, rated for 10A current. With a temperature range of -5 to 40°C, it is ideal for relay applications requiring secure screw terminations. Measuring 2.165" x 1.654" x 1.122", this RELAY SOCKET offers reliable connectivity in various electronic devices.

4-1419106-0

TE Connectivity

IC SOCKET; Termination Type: SOLDER; Contact Finish (Mating): NOT APPLICABLE; Contact Material: NOT APPLICABLE;

95.05SPA

Finder

RELAY SOCKET; Housing Material: PLASTIC; No. of Contacts: 8;

788-312

Wago

RELAY SOCKET; Contact Material: NOT SPECIFIED; Contact Finish (Mating): NOT SPECIFIED; Contact Finish (Termination): NOT APPLICABLE;

4620

Keystone Electronics

TRANSISTOR SOCKET;

93.01.7.024

Finder

RELAY SOCKET; Device Type Used On: RELAY;

9-1393809-1

TE Connectivity

IC SOCKET; Housing Material: POLYCARBONATE; Contact Finish (Mating): NOT APPLICABLE; Contact Material: NOT APPLICABLE; Termination Type: SOLDER;

788-304

Wago

RELAY SOCKET; Contact Material: NOT SPECIFIED; Contact Finish (Termination): NOT APPLICABLE; Contact Finish (Mating): NOT SPECIFIED;

7-1393161-3

TE Connectivity

IC SOCKET; Housing Material: POLYAMIDE; Contact Material: NOT APPLICABLE; Contact Finish (Mating): NOT APPLICABLE; Termination Type: SOLDER;

95.15.2SMA

Finder

RELAY SOCKET; Contact Finish (Termination): NOT SPECIFIED; Contact Material: NOT SPECIFIED; No. of Contacts: 8; Contact Finish (Mating): NOT SPECIFIED;

8134-HC-6P2

TE Connectivity

TE Connectivity's 8134-HC-6P2 is a Chip Carrier IC Socket with PRESS FIT termination, RND PIN-SKT contact style, and 5A current rating. Ideal for applications requiring a temperature range of -65°C to 125°C, this socket offers reliable performance in various electronic devices.

1050281001

Molex

OTHER SOCKET; Device Type Used On: CAMERA; Housing Material: PLASTIC; Contact Finish (Mating): NOT APPLICABLE; No. of Contacts: 32; Additional Features: STANDARD: UL 94V-0;

2227MC-08-03-18-F1

Multicomp Pro

IC SOCKET; Device Type Used On: DIP8; Housing Material: POLYBUTYLENE TEREPHTHALATE; No. of Contacts: 8; JESD-609 Code: e4; Additional Features: STANDARD: UL94-0;

214-44-308-01-670800

Mill-max Mfg

214-44-308-01-670800 by Mill-max Mfg is a Chip Carrier IC Socket with NYLON46 housing material and MATTE TIN finish. It is designed for DIP8 devices, featuring 8 contacts in RECTANGLE configuration. Ideal for secure connection of integrated circuits in various electronic applications.

VCF4-1000

TE Connectivity

IC SOCKET; Contact Finish (Mating): NOT APPLICABLE; Termination Type: SOLDER; Contact Material: NOT APPLICABLE; No. of Contacts: 1;

P2R-05P

Omron

RELAY SOCKET; Contact Finish (Mating): NOT SPECIFIED; Contact Material: NOT SPECIFIED; No. of Contacts: 5; Contact Finish (Termination): NOT APPLICABLE;

110-93-316-41-001000

Mill-max Mfg

IC SOCKET; Device Type Used On: DIP16; Housing Material: PCT POLYESTER; Contact Config: RECTANGLE; JESD-609 Code: e0; Contact Finish (Termination): Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier;

Circuit Protection 5,209,102

• Circuit Breaker

• Fuses

C10G25

Eaton Corporation

The Eaton Corporation C10G25 fuse is a 25A electric fuse with a rated AC/DC voltage of 500V. It has a body length/diameter of 10mm and terminal shape of END CAP, meeting IEC standards. Ideal for circuit protection in various applications due to its high breaking capacity of 120kA and inline/holder mounting feature.

0466.125NR

Littelfuse

Littelfuse 0466.125NR fuse, rated at 125V and 0.125A, with trip time of 0.2s, is a surface mount electric fuse measuring 3.18mm x 1.52mm x 0.58mm. It has a very fast blow characteristic and matte tin over nickel terminal finish, suitable for circuit protection in applications requiring high breaking capacity up to 50A at temperatures ranging from -55°C to 90°C.

CHF120

Eaton Corporation

THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 240 V; Rated DC Voltage: 240 V; Rated Current: 20 A; Actuator Type: TOGGLE;

0881060.UR

Littelfuse

ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 75 V; Rated Current: 60 A; Terminal Shape: J BEND; Rated Breaking Capacity: 1500 A;

180LET

Eaton Corporation

180LET fuse by Eaton Corporation offers 1600J nominal joule integral, 240V AC voltage rating, and 180A current rating. Ideal for circuit protection in various applications with a rated breaking capacity of 200kA. Dimensions: 17.7mm x 26.2mm, terminal shape TAB/BLADE, mounting INLINE/HOLDER.

BK/ATC-5

Eaton Corporation

BK/ATC-5 by Eaton Corp is a 32V, 5A fast blow electric fuse with 1000A breaking capacity. Measuring 19.3mm x 5.25mm x 12.5mm, it has tab/blade terminals and UL certification. Ideal for inline mounting in circuits requiring quick 0.1s trip time at -40 to 100°C temperatures.

02153.15MXP

Littelfuse

02153.15MXP fuse by Littelfuse is a 3.15A, 250V electric fuse with a time lag blow characteristic. It has a rated breaking capacity of 1500A and nominal joule integral of 43.255J, making it suitable for circuit protection in various applications requiring reliable overcurrent protection.

0603SFS350F/32-2

Littelfuse

ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.5 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;

0885001.DR

Littelfuse

ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 350 V; Rated DC Voltage: 500 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND;

0466.750NR

Littelfuse

Littelfuse 0466.750NR is a 1206 size fuse with 0.75A rated current and 63V rated voltage. It offers very fast blow characteristic, 0.2s trip time, and 0.0276J nominal joule integral. Ideal for electric circuit protection in applications requiring surface mount fuses with CSA and UL standards compliance.

0312002.MXP

Littelfuse

0312002.MXP fuse by Littelfuse is a 3AG size electric fuse with a rated current of 2A and a max operating temperature of 125°C. It has a blow characteristic of FAST and is suitable for circuit protection in various applications.

0454004.MR

Littelfuse

0454004.MR by Littelfuse is a NANO-sized electric fuse with a rated current of 4A and max operating temperature of 125°C. It has a slow blow characteristic and is suitable for surface mount applications in circuits requiring protection against overcurrents.

KTK-1/4

Cooper Electronic Technologies

ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Manufacturer Series: KTK;

W68-X2Q12-15

TE Connectivity

TE Connectivity's W68-X2Q12-15 is a 15A magnetic circuit breaker with 277V AC voltage rating and 2.2s trip delay. Featuring quick connect terminals, toggle actuator, and panel mount design, it offers a rated breaking capacity of 5000A. Ideal for series trip applications requiring reliable circuit protection in compact spaces.

0466002.NR

Littelfuse

Littelfuse 0466002.NR fuse, rated at 2A and 63V, offers very fast blow characteristic with 0.2326J nominal joule integral. Ideal for circuit protection in electronics, it has a compact size of 1206 (3.18mm x 1.52mm x 0.58mm) and matte tin over nickel terminal finish for surface mount applications.

0463020.ER

Littelfuse

Littelfuse 0463020.ER NANO fuse with 20A current rating, 433J joule integral, and 60s trip time is ideal for circuit protection in applications requiring fast blow characteristic. Rated at 250V AC/DC, it has a compact size of 10.1mm x 3.05mm x 3.05mm and surface mounting feature for versatile use in various electronic devices.

3413.0326.22

Schurter Ag

Schurter Ag's 3413.0326.22 fuse is a TIME LAG type with 8.7J Nominal Joule Integral, rated for 32V AC and 63V DC applications. With dimensions of 3.2x1.6x0.6mm, it offers circuit protection in various electronic devices at temperatures ranging from -55 to 90°C.

FNQ-25

Eaton Corporation

ELECTRIC FUSE; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 38.1 mm; Rated Breaking Capacity: 10000 A; Body Length/Diameter: 10.41 mm;

ANL-400

Eaton Corporation

Eaton Corporation's ANL-400 fuse, with 81mm x 22.2mm dimensions and 400A rated current, offers time delay blow characteristic for electric circuit protection at 80V DC. Featuring an end cap terminal shape and inline mounting feature, it has a high breaking capacity of 2700A and built-in indicator for safety compliance with CSA and UL standards.

TR/3216FF15-R

Eaton Corporation

ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 24 V; Rated Current: 15 A; Terminal Shape: WRAPAROUND; Dimensions: 3.2mm x 1.6mm x 0.89mm;

Connector Accessories 123,061,978

• Assembly Products

• Electrical Wires & Cables

• Heat Shrinks

• Machinery & Tools

• Mil-Spec Backshells and Connector Accessories

M85049/52S12N

Amphenol

CIRCULAR CONN ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-26482, MIL-DTL-5015, MIL-DTL-83723; MIL-Connector Accessory Name: CLAMPING ITEM; IEC Conformity: NO; Shell Sizes: 7/12;

M39029/63-368

TE Connectivity

TE Connectivity's M39029/63-368 is a CRIMP contact type backshell accessory for AMPLIMITE connectors. It has a finish thickness of 50, MIL conformity, and operates b/w -55 to 125 °C. Suitable for wire gauges ranging from 24 to 20 AWG, it is designed for signal transmission in military applications meeting MIL-C-24308 and MIL-C-39029 standards.

TFC2006

L-com

Wires and Cables;

1924464-1

TE Connectivity

TE Connectivity's 1924464-1 is a female crimp contact with stamped design, suitable for power applications. It supports wire gauge from 20 to 18 AWG, rated at 13A current. With a temperature range of -40 to 120 °C, it offers a secure connection in various assembly products.

D-200-83

TE Connectivity

TE Connectivity's D-200-83 is a CRIMP terminal with operating temperatures ranging from -55 to 200°C. It supports wire gauges from 20 to 16 AWG and cable types like DISCRETE WIRE. Made of COPPER ALLOY, it finds application in various assembly products requiring reliable connections.

0460-204-08141

TE Connectivity

TE Connectivity's 0460-204-08141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55°C to 125°C, suitable for wire sizes ranging from 10 AWG to 8 AWG. With a rated current of 60 A, it is ideal for high-power applications requiring reliable male contacts.

66255-8

TE Connectivity

TE Connectivity 66255-8 is a CRIMP terminal for CPC/G and M SERIES connectors with wire gauge 12 AWG, rated current of 35A. It has a copper alloy construction, right angle mounting style, and operates b/w -40 to 85 °C. Ideal for power applications requiring male contact gender.

LMR-1200-FR

Times Microwave Systems

WIRE AND CABLE;

TAT-125-3/8-0-2IN

TE Connectivity

HEAT SHRINK TUBE; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Jacket Material: POLYOLEFIN; Construction: DUAL WALL; Maximum Operating Temperature: 110 Cel;

192990-0110

ITT Cannon

ITT Cannon's 192990-0110 CONTACT features STAMPED, LOOSE design for FEMALE gender. With BRASS material, it supports 18-16 AWG wire sizes and handles up to 13A current. Ideal for assembly applications requiring reliable electrical connections.

886410021000

Belden

Belden 886410021000 is a CSA, ISO/IEC, UL approved communication cable with stranded construction and FEP jacket. Featuring tinned copper conductor, it has 2 conductors rated at 300V and 2.2A for applications requiring shielding in temperatures ranging from -70 to 200°C.

2133091200

Molex

TOOL AND MACHINERY;

3659/37

3m Electronic Products Division

3659/37 by 3M Electronic Products Division is a flat cable with 37 copper conductors, each stranded in a 7x36 configuration. It has approvals from CUL and UL for use in electrical applications up to 300V. With a PVC jacket and insulation, it can operate b/w -20°C to 105°C, making it suitable for various wiring needs.

350536-7

TE Connectivity

TE Connectivity's 350536-7 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with approvals from CSA, UL, and VDE. It features a rated voltage of 600V, construction of STRANDED, and terminal type CRIMP. Ideal for power applications with wire gauge up to 14 AWG and rated current of 19A.

R85049/88-19Z02

TE Connectivity

CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Material: ALUMINUM ALLOY;

66741-6

TE Connectivity

TE Connectivity 66741-6 is a CRIMP terminal for CPC/G and M SERIES connectors. It has a wire gauge of 10 AWG, rated current of 35 A, and copper alloy material. Ideal for power applications with right angle mounting style and blade pin-skt contact design.

56134-9000

Molex

Molex 56134-9000 is a crimp terminal contact with a min wire size of 28 AWG and max wire size of 22 AWG. It is commonly used in the assembly products category, specifically for the 51242, 51382, and 51353 series.

98360601000

Belden

WIRE AND CABLE;

382A012-25-0

TE Connectivity

HEAT SHRINK BOOT; Minimum Operating Temperature: -75 Cel; Jacket Material: ELASTOMER; Construction: DUAL WALL; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel;

TFCLS6005-BLK

Infinite Electronics International

WIRE AND CABLE;

Connectors 93,766,116

382811-2

TE Connectivity

TE Connectivity 382811-2 is a 0.1" pitch interconnection device with GLASS FILLED POLYESTER insulator, rated for 3A signal current. Ideal for board mounting applications, it features a female SQ PIN-SKT contact style and operates b/w -65 to 105 °C.

5001

Keystone Electronics

INTERCONNECTION DEVICE; Termination Contact Finish: Silver (Ag); JESD-609 Code: e4; Additional Features: NYLON46, 94V-0;

52465-1471

Molex

Molex 52465-1471 is a 2-row board connector with 14 contacts, 0.8mm terminal pitch, and -40 to 105°C operating temperature range. Ideal for surface mount applications in electronics requiring high UL flammability rating of 94V-0.

5002

Keystone Electronics

INTERCONNECTION DEVICE; Termination Contact Finish: Silver (Ag); Additional Features: NYLON46, 94V-0; JESD-609 Code: e4;

5046181012

Molex

BOARD STACKING CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

MMCX-P-P-H-ST-TH1

Samtec

Samtec's MMCX-P-P-H-ST-TH1 is a RF MMCX connector with 50 ohm impedance, gold contact finish, and 6 GHz operating frequency. Ideal for commercial applications, it features a 0.138" body diameter, -65 to 125 °C temperature range, and 700VAC dielectric voltage.

2SN-BK-G

Samtec

INTERCONNECTION DEVICE; JESD-609 Code: e4; Insulator Material: GLASS FILLED POLYESTER; Termination Contact Finish: GOLD OVER NICKEL; Maximum Operating Temperature (Cel): 125; Minimum Operating Temperature: -55 Cel;

44432-0401

Molex

The Molex 44432-0401 is a rectangular power connector with 4 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and UL certification.

B4B-PH-K-S(LF)(SN)

J S T Mfg

B4B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator material and BRASS contact material. Ideal for applications requiring a male SQ PIN-SKT contact style on a RECTANGULAR PCB pattern.

5-146280-1

TE Connectivity

TE Connectivity 5-146280-1 is a board connector with 0.1" mating pitch, -65 to 105°C operating temp, and 3A signal current rating. It features matte tin finish, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and solder termination for male contacts. Ideal for commercial applications requiring high reliability and UL94V-0 flammability rating.

46992-0210

Molex

The Molex 46992-0210 is a power connector with 0.213" x 0.42" x 0.42" dimensions. Made of POLYAMIDE, it has 2 contacts, UL94V-2 flammability rating, and SQ PIN-SKT contact style. Ideal for cable mounting applications requiring female connectors meeting UL standards.

2337019-1

TE Connectivity

TE Connectivity 2337019-1 RF Connector features snap coupling, polyethylene insulator, and gold flash shell finish. With a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for board mounting applications in electronic devices. Operating temperature ranges from -40 to 85°C make it suitable for various environments.

5015

Keystone Electronics

INTERCONNECTION DEVICE; JESD-609 Code: e4; Termination Contact Finish: Silver (Ag);

22057055

Molex

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Mixed Contacts: NO; Termination Type: SOLDER;

FTSH-105-01-L-DV-K-P-TR

Samtec

Samtec's FTSH-105-01-L-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator material and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.

51021-0400

Molex

The Molex 51021-0400 is a board connector with 4 contacts, 0.049" pitch, and 353VAC voltage rating. Ideal for commercial applications, it features a polarization key, POLYBUTYLENE TEREPHTHALATE insulator, and operates b/w -40 to 105°C.

781715007

Molex

BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;

51021-0300

Molex

The Molex 51021-0300 is a board connector with 3 contacts, 0.049" pitch, and insulation resistance of 100M ohm. It has a temperature range of -40 to 85°C, ideal for commercial applications requiring reliable female crimp connectors in cable assemblies with locking mounting option.

1609222

Phoenix Contact

INTERCONNECTION DEVICE;

S2B-EH(LF)(SN)

J S T Mfg

S2B-EH(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.098" pitch, 0.295" body length, and 0.165" body width. It features bright tin finish, POLYAMIDE66 insulator, and solder termination for right-angle mounting applications. Ideal for electronics requiring compact connectors with high reliability in tight spaces.

Converters 318,051

• Analog Special Purpose Converters

• Analog-to-Digital Converters

• Data Acquisition ADCs & DACs

• Digital Potentiometers (DigiPOT)

• Digital-to-Analog Converters

• Other Function Converters

AD9633BCPZRL7-80

Analog Devices

ADC, FLASH METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

MCP4728T-E/UN

Microchip Technology

MCP4728T-E/UN by Microchip Tech is a 12-bit DAC with max output voltage of 5.5V, settling time of 6us, and linearity error of 0.3174%. Ideal for automotive applications due to temp range -40 to 125°C, it's a small outline converter with serial input format and low supply current of 1.4mA.

MAX11214EUG+

Analog Devices

MAX11214EUG+ by Analog Devices is a 24-bit ADC with 0.0004% EL, 0.032 MHz sample rate, and 3.6V max analog input voltage. Ideal for industrial applications, it features a small outline package with dual terminals and operates b/w -40 to 85°C.

LTC2315ITS8-12#TRMPBF

Analog Devices

LTC2315ITS8-12#TRMPBF by Analog Devices is a 12-bit ADC with 0.0366% linearity error, 5 MHz sample rate, and 3.6V max analog input voltage. It is ideal for industrial applications requiring precise analog-to-digital conversion in a compact package.

MAX5735AUTN+

Analog Devices

MAX5735AUTN+ by Analog Devices is a 16-bit digital-to-analog converter (DAC) with a max analog output voltage of 5V. It is surface mountable and has a settling time of 20us. This DAC is commonly used in applications requiring precise analog voltage outputs.

LTC2185IUP#PBF

Analog Devices

LTC2185IUP#PBF by Analog Devices is a 16-bit ADC with 2 analog in channels, 125 MHz sample rate, and CMOS technology. It operates b/w -40 to 85 °C and has a max analog input voltage of 1.25 V. Ideal for industrial applications requiring high-speed data conversion in a compact chip carrier package.

DS3904U-020

Maxim Integrated

DS3904U-020 by Maxim Integrated is a 2-WIRE SERIAL digital potentiometer with 3 functions, 20000 ohm total resistance, and 123 ppm/°C temperature coefficient. It is used in industrial applications for precise resistance adjustments in circuits with a voltage range of -0.3V to 5.5V.

PCM1796DBR

Texas Instruments

D/A CONVERTER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;

ADS1271IPWR

Texas Instruments

The Texas Instruments ADS1271IPWR is a 24-bit ADC with 0.0015% EL, operating at 105°C. It features a sample rate of 0.105 MHz and supports supply voltages of 1.8/3.3,5 V. Ideal for industrial applications requiring high precision analog-to-digital conversion in compact designs with surface mount capabilities.

AD5429YRUZ-REEL7

Analog Devices

D/A CONVERTER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;

ADS1255IDBT

Texas Instruments

Texas Instruments ADS1255IDBT is a 24-bit ADC with 2 analog in channels, 0.001% EL, and 0.03 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package. Operates at -40 to 85 °C with dual terminal position and GULL WING form factor.

ADS7823EB/250

Texas Instruments

ADS7823EB/250 by Texas Instruments is a 12-bit ADC with 1 analog input channel. It operates at a sample rate of 0.05 MHz and has a max linearity error of 0.0244%. This converter is commonly used in industrial applications requiring precise analog-to-digital conversion.

X9C104SZ

Renesas Electronics

X9C104SZ by Renesas Electronics is a digital potentiometer with 100kΩ total resistance, linear resistance law, and increment/decrement control interface. It is used in applications requiring precise resistance adjustments in compact electronic devices.

AD7732BRUZ

Analog Devices

AD7732BRUZ by Analog Devices is a 24-bit ADC with 2 analog input channels. It has a max linearity error of 0.003% and operates at temperatures ranging from -40 to 105 °C. This converter, with a sample rate of 0.012 MHz, is commonly used in industrial applications requiring precise analog-to-digital conversion.

LTC1968CMS8#PBF

Analog Devices

LTC1968CMS8#PBF by Analog Devices is an RMS to DC converter with 0.15% max linearity error, operating b/w 0-70°C. It has a supply voltage range of 4.5-5.5V and comes in a small outline package suitable for commercial applications requiring precise signal conversion.

LTC2449CUHF#PBF

Analog Devices

LTC2449CUHF#PBF by Analog Devices is a 24-bit ADC with 16 analog input channels. It operates at temperatures from 0 to 70°C and has a max conversion time of 170 ms. Ideal for applications requiring high-resolution analog-to-digital conversion in commercial-grade environments.

AD7623ASTZ

Analog Devices

ADC, PROPRIETARY METHOD; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;

ADS7138IRTER

Texas Instruments

Texas Instruments ADS7138IRTER is a 12-bit ADC with 8 analog in channels, 0.0488% max linearity error, and 0.14 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion within -40 to 85°C range. Package style: Chip Carrier, Heat Sink/Slug, very thin profile.

ISL90728WIE627Z-TK

Renesas Electronics

DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

AD7782BRU-REEL

Analog Devices

ADC, DELTA-SIGMA; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;

Crystals & Resonators 29,449,651

• Ceramic Resonators

• Crystal Oscillators

• Dielectric Resonators

• SAW Resonators

FC-13532.7680KA-A5

Seiko Epson

FC-13532.7680KA-A5 by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C with GOLD OVER NICKEL terminal finish.

7M-16.000MAAJ-T

Txc

7M-16.000MAAJ-T by Txc is a crystal oscillator with 16 MHz nominal frequency, 30 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in electronics due to its compact size and surface mounting feature.

CS325S24000000ABJT

Citizen Finedevice

CS325S24000000ABJT by Citizen Finedevice is a 24 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -10 to 60 °C, with low aging at 5 PPM/year.

LFXTAL003000REEL

Iqd Frequency Products

LFXTAL003000REEL by IQD Frequency Products is a 32.768 MHz crystal oscillator with 20 ppm frequency tolerance and 5 PPM/YEAR aging. Ideal for applications requiring precise timing, it features a parallel-fundamental crystal type and operates b/w -40 to 85 °C temperatures.

ABS06-32.768KHZ-9-1-T

Abracon

Abracon ABS06-32.768KHZ-9-1-T crystal oscillator offers 10 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and wearables due to its compact surface mount design.

ABM7-8.000MHZ-D-2-Y-T

Abracon

ABM7-8.000MHZ-D-2-Y-T by Abracon is a 8 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as in telecommunications equipment or industrial automation systems.

ABM3B-27.120MHZ-10-D-1-G-T

Abracon

ABM3B-27.120MHZ-10-D-1-G-T by Abracon is a 27.12 MHz crystal oscillator with 10 ppm frequency tolerance and 15% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C, featuring nickel/gold terminal finish and parallel-fundamental type.

ABM8G-24.000MHZ-18-D-2-Y-T

Abracon

ABM8G-24.000MHZ-18-D-2-Y-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications equipment and industrial automation systems.

ABMM2-8.000MHZ-E2-T

Abracon

ABMM2-8.000MHZ-E2-T by Abracon is a 8 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, featuring gold terminal finish and surface mounting feature.

ABM3C-20.000MHZ-D4Y-T

Abracon

ABM3C-20.000MHZ-D4Y-T by Abracon is a 20 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications and industrial automation.

ABM8G-12.000MHZ-18-D-2-Y-T

Abracon

ABM8G-12.000MHZ-18-D-2-Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems. Operating temperature range from -40 to 85 °C with surface mount feature for easy installation.

ECS-110.5-20-5PX-TR

Ecs International

ECS-110.5-20-5PX-TR by Ecs International is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing at 11.05 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -10°C to 70°C makes it versatile for various environments.

XRCGB38M400F1S2GR0

Murata Manufacturing

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Drive Level: 300 uW; Nominal Operating Frequency: 38.4 MHz;

ABM3B-8.000MHZ-D-2-Y-T

Abracon

ABM3B-8.000MHZ-D-2-Y-T by Abracon is a 8 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as in telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C with surface mount feature for easy installation.

ABM3B-8.000MHZ-B-2-T

Abracon

ABM3B-8.000MHZ-B-2-T by Abracon is a 8 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in electronics, it operates b/w -20 to 70 °C, featuring nickel/gold terminal finish and parallel-fundamental type.

ABM8G-16.000MHZ-18-D-2-Y-T

Abracon

ABM8G-16.000MHZ-18-D-2-Y-T by Abracon is a 16 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications and industrial automation.

MMC-463F-32.768KHZ-T

Abracon

Abracon's MMC-463F-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance and 144% stability, with a series resistance of 50k ohm. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

ABS07-32.768KHZ-1-T

Abracon

Abracon ABS07-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz in a compact surface-mount package.

ABM11-32.000MHZ-D2X-T3

Abracon

ABM11-32.000MHZ-D2X-T3 by Abracon is a 32 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85°C, such as telecommunications equipment and industrial automation systems.

Diodes 2,622,077

• Bridge Rectifier Diodes

• Current Regulator Diodes

• Diodes & Rectifiers

• Microwave Mixer & Detector Diodes

• Other Function Diodes

• PIN Diodes

• Special Microwave Diodes

• Stabistor Diodes

• Step Recovery Diodes (SRD)

• Transient Suppression Devices

• Varactor Diodes

• Voltage Multipliers

• Zener Diodes

1N4554RB

Motorola

1N4554RB by Motorola is a Zener diode with 6.2V nominal reference voltage, 2000 mA test current, and 20 uA reverse current. Ideal for applications requiring precise voltage regulation in circuits with a max power dissipation of 50W.

SMBJ6.0ATR

Sangdest Microelectronics (Nanjing)

Sangdest Microelectronics (Nanjing) SMBJ6.0ATR is a 600W TRANS VOLTAGE SUPPRESSOR DIODE with 7.02V Breakdown Voltage and 800uA Max Reverse Current. Ideal for transient suppression in electronics, it operates b/w -55 to 150 °C, meeting MIL-STD-750 standards.

SZMMSZ5260BT1G

Onsemi

SZMMSZ5260BT1G by Onsemi is a Zener diode with 43V nominal reference voltage, 5% max voltage tolerance, and 93 ohm max dynamic impedance. It is ideal for automotive applications due to AEC-Q101 standard compliance and can operate b/w -55°C to 150°C. This single-configured diode comes in a small outline package with gull wing terminals for surface mount assembly.

PZU6.2B2,115

NXP Semiconductors

ZENER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

SBR3U60P1Q-7

Diodes Incorporated

SBR3U60P1Q-7 by Diodes Inc. is a single rectifier diode with a max output current of 3A and peak repetitive reverse voltage of 60V. It is designed for super fast soft recovery applications, operating b/w -65 to 150°C. This surface-mount diode has a matte tin finish, making it suitable for various electronic circuits.

NRVBD660CTT4G

Onsemi

NRVBD660CTT4G by Onsemi is a fast recovery power diode with common cathode configuration. It has a max reverse voltage of 60V, forward voltage of 0.9V, and output current of 3A. Ideal for applications requiring high efficiency and quick response times in temperatures ranging from -65 to 175°C.

ESD7371HT1G

Onsemi

ESD7371HT1G by Onsemi is a single-configured, surface mount Transient Suppression Device with a breakdown voltage of 7V. It is designed for use in applications that require protection against electrostatic discharge (ESD) and other transient voltage events.

SMCJ60CA

Vishay Intertechnology

Vishay Intertechnology's SMCJ60CA is a single bidirectional transient suppression diode with 1500W peak power dissipation and 70.2V breakdown voltage. Ideal for protecting electronic circuits from voltage spikes in applications such as power supplies, telecommunications, and automotive systems.

JANTX1N5804US

Microchip Technology

JANTX1N5804US by Microchip is a single rectifier diode with a max output current of 2.5A and a max repetitive peak reverse voltage of 100V. It has an ultra-fast recovery time of 0.025us, making it ideal for applications requiring high-speed power delivery. The diode is designed for surface mount installation in isolated case connections, meeting MIL-19500/477F standards.

SSA34HE3_A/H

Vishay Intertechnology

The Vishay Intertechnology SSA34HE3_A/H is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.49V. It operates in temperatures ranging from -65°C to 150°C, making it suitable for high-efficiency applications. With a min breakdown voltage of 40V, this diode is ideal for various electronic circuits requiring low power loss and high switching speeds.

MMBD4148SERFG

Taiwan Semiconductor

MMBD4148SERFG by Taiwan Semiconductor is a series connected diode with 2 elements, featuring a max reverse recovery time of 0.004 us and a max reverse current of 5 uA. This rectifier diode has a breakdown voltage of 75 V and is ideal for applications requiring small outline surface mount diodes in electronic circuits.

SP0502BAHTG

Littelfuse

SP0502BAHTG by Littelfuse is a Transient Suppression Device with 2 ELEMENTS, COMMON ANODE config, and SILICON diode element material. It has a max clamping voltage of 6.8V and is ideal for protecting sensitive electronics from voltage spikes in various applications.

BZX84-B13,215

NXP Semiconductors

NXP Semiconductors' BZX84-B13,215 Zener Diode has a nominal reference voltage of 13V and max reverse current of 0.1uA. With a working test current of 5mA, it is ideal for applications requiring precise voltage regulation in small outline packages.

BAV21WSR9G

Taiwan Semiconductor

BAV21WSR9G by Taiwan Semiconductor is a single rectifier diode with a max reverse recovery time of 0.05 us and max forward voltage of 1.25 V. It is designed for efficiency applications, operating b/w -65 to 150 °C, with a peak reflow temperature of 260°C.

PESD36VS1UL,315

NXP Semiconductors

PESD36VS1UL,315 by NXP Semiconductors is a single transient suppression device with a max power dissipation of 150W. It has a breakdown voltage of 39V and offers unidirectional polarity. This chip carrier package is ideal for protecting electronic circuits from voltage spikes in automotive and industrial applications.

BZX384-C3V3,115

NXP Semiconductors

NXP Semiconductors' BZX384-C3V3,115 Zener Diode has a 3.3V nominal reference voltage with a max power dissipation of 0.3W. It operates b/w -65 to 150°C, featuring a unidirectional polarity for various applications in electronics requiring precise voltage regulation and protection against voltage spikes.

BYV27-150-TAP

Vishay Intertechnology

Vishay Intertechnology's BYV27-150-TAP is a single rectifier diode with a max forward voltage of 0.88 V and a max output current of 2 A. It is designed for ultra-fast recovery applications, with an operating temperature range from -55°C to 175°C.

BAS316-TP

Micro Commercial Components

BAS316-TP by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us and max forward voltage of 0.715 V. It is designed for applications requiring low power dissipation, such as in small outline packages for surface mount PCBs. With a peak repetitive reverse voltage of 100 V, it operates efficiently within a wide temperature range from -65 to 150 °C.

SZMMBZ47VALT1G

Onsemi

SZMMBZ47VALT1G by Onsemi is a Zener diode with 47V breakdown voltage, 40W peak power dissipation, and 0.05uA reverse current. Commonly used in transient suppression applications due to its small outline package and unidirectional polarity.

BZX384-B56,115

NXP Semiconductors

ZENER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Electronic Components 119,645

• CPU Accelerators/ System Cache Controllers

• Computer Processors

• Graphics Computing Systems

• Motherboards

Fiber Optics 2,921,955

• Fiber Optics - Add Drop Multiplexer Demultiplexer

• Fiber Optics - Amplifiers

• Fiber Optics - Attenuators

• Fiber Optics - Circulator & Isolators

• Fiber Optics - Detectors

• Fiber Optics - Emitters

• Fiber Optics - Filters

• Fiber Optics - Modulators

• Fiber Optics - Other Function

• Fiber Optics - Receivers

• Fiber Optics - Splitter & Couplers

• Fiber Optics - Switches

• Fiber Optics - Transceivers

• Fiber Optics - Transmitters

• Fiber Optics - Wavelength Division Mux & Demux

AFBR-57M5APZ

Broadcom

Broadcom AFBR-57M5APZ is a VCSEL transceiver for MMF fiber with LC connector. It operates at 3.3V, supports GBE communication standard, and has a temperature range of -10 to 85 °C. Ideal for panel mount applications in data centers and networking equipment.

HFBR-1404Z

Broadcom

TRANSMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Maximum Supply Voltage: 5.25 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Body Width: 12.7 inch;

AFBR-5972Z

Broadcom

TRANSCEIVER; Mounting Feature: PANEL MOUNT; Maximum Supply Voltage: 3.6 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Nominal Optical Power Output: .223 mW;

FCR684208R

Cliff Electronic Components

FCR684208R by Cliff Electronic Components is a fiber optic receiver with LED and photodiode. It operates at 650nm wavelength, supports 16 Mbps data rate, and has a built-in amplifier. Ideal for board mounting applications in temperature range of -20 to 70°C.

AFBR-710ISMZ

Broadcom

TRANSCEIVER; Mounting Feature: PANEL MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Emitter or Detector Type: VCSEL; Fiber Type: MMF;

HFCT-5911ATLZ

Broadcom

Broadcom's HFCT-5911ATLZ transceiver offers 1250 Mbps data rate, LASER DIODE & PIN PHOTODIODE tech, and LC CONNECTOR. Ideal for GBE communication standard, it operates at 1310 nm wavelength with -20 dBm sensitivity level. Suitable for MMF & SMF fiber types, it is a compact board/pnl mount solution with built-in amplifier feature.

SFH551/1-1V

Infineon Technologies

SFH551/1-1V by Infineon Technologies is a POF photodiode detector with a 660nm nominal operating wavelength. It has a max supply voltage of 5.25V and built-in amplifier feature. Ideal for digital transmission applications, it can operate in temperatures ranging from -40 to 85°C.

SFH250V

Infineon Technologies

SFH250V by Infineon Technologies is a POF photodiode detector with 1nA dark current. Operating at 400-1100nm, it supports data rates up to 1100Mbps. Ideal for fiber optics applications, this component has a compact body measuring 2.55mm x 5.5mm x 9mm and can be mounted through holes.

PDS-104GO/AC/M-CC

Microchip Technology

SWITCH;

FTLF1319F1GTL

Ii-vi

FTLF1319F1GTL by Ii-vi is a fiber optic transceiver with 2125 Mbps Rx/Tx data rates, LASER emitter, and LC connector. It operates at 1313 nm wavelength, -40 to 85 °C temperature range, and supports GBE communication standard. Ideal for high-speed data transmission in networking applications.

AFBR-1624Z

Broadcom

Broadcom's AFBR-1624Z is a POF LED transmitter with 0.63mW optical power output, operating at 658nm wavelength. It supports RS-232 and RS-485 communication standards, suitable for digital transmission applications in fiber optics. With a max supply voltage of 3.465V and operating temperature range from -40 to 85°C, it offers reliable performance in various environments.

SFH551/1-1

Infineon Technologies

SFH551/1-1 by Infineon Technologies is a POF photodiode detector with 660nm nominal wavelength, 5V supply voltage, and 85°C max operating temp. Ideal for digital transmission applications, it features a built-in amplifier and through-hole mounting for efficient fiber optics detection.

HFBR-2523Z

Broadcom

Broadcom's HFBR-2523Z is a POF receiver with 660nm wavelength, 0.04 Mbps data rate, and 5.5V max supply voltage. Ideal for digital reception applications, it operates b/w 0-70°C temperatures with DIP package style for through-hole mounting.

AFBR-1529Z

Broadcom

TRANSMITTER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Transmission Type: ANALOG;

AFBR-1528CZ

Broadcom

TRANSMITTER; Terminal Finish: Tin (Sn); JESD-609 Code: e3;

HFBR-1528Z

Broadcom

Broadcom's HFBR-1528Z is a POF LED transmitter with 650nm wavelength, 10 Mbps data rate, and 0.059 mW optical power output. Ideal for digital transmission applications in fiber optics, it operates at temperatures from -40 to 85 °C and has built-in amplifier features.

FTLC9558REPM

Finisar

TRANSCEIVER;

FTLF8524E2GNL

Ii-vi

FTLF8524E2GNL by Ii-vi is a fiber optic transceiver with 4250 Mbps Rx/Tx data rates, LASER emitter, and LC connector. It operates at 845 nm wavelength, suitable for MMF fiber types. Ideal for high-speed data transmission in networking applications.

HFBR-1521Z

Broadcom

Broadcom's HFBR-1521Z is a POF LED transmitter with 660nm wavelength, 5 Mbps data rate, and DIP package style. Ideal for digital transmission applications, it operates b/w -40 to 85°C temperatures and requires a supply voltage of 1.45-2.02V.

HFBR-2412TZ

Broadcom

Broadcom's HFBR-2412TZ is a PIN photodiode receiver for fiber optics with 820nm wavelength. It operates at -40 to 85°C, has a sensitivity of -34.4 dBm, and requires 4.75-5.25V supply voltage. Ideal for analog reception using ST connector in through-hole mounting applications.

Filters 417,945

• Cavity Filters

• Ceramic Filters

• Crystal Filters

• Data Line Filters

• Duplexers

• EMI Mains Filters

• General Purpose Electronic Filters

• Passive Filters

• SAW Filters

• Telecom Filters

• Tubular Filters

• Tunable Filters

HZ0805C202R-10

Laird Technologies

Laird Technologies' HZ0805C202R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 mm, it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 2000 OHM. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering capabilities.

2499-003-X5S0-102MLF

Cts

FEED THROUGH CAPACITOR; Rated Current: 20 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e4; Additional Features: C-TYPE CIRCUIT;

B82790S0513N201

TDK

TDK B82790S0513N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. Operating b/w -40°C to 125°C, it has a max DC resistance of 0.14 ohm. Ideal for applications requiring noise suppression in data lines, it comes in surface mount packaging with dimensions of L7.1xB6.0xH4.9mm.

4209-053LF

Cts

FEED THROUGH CAPACITOR; Rated Current: 10 A; Additional Features: PI-TYPE CIRCUIT; SILVER PLATED HEX NUT AND INTERNAL TOOTH LOCK WASHER; Rated Voltage: 100 V; Mounting Type: PANEL MOUNT; Capacitance: 5500 uF;

B39162B3913U410

TDK

The TDK B39162B3913U410 is a SAW filter with 6 terminals, operating from -40°C to 85°C. It has a center frequency of 1588 MHz and max insertion loss of 3 dB. Ideal for applications requiring a compact surface mount filter with gold terminal finish and AEC-Q200 screening level.

YFF31HC2A105MT000N

TDK

YFF31HC2A105MT000N by TDK is a FEED THROUGH CAPACITOR with 100 V rated voltage, 40 dB max insertion loss, and 6 A rated current. Ideal for data line filtering applications due to its compact dimensions of L3.2XB1.6XH1.3 (mm) and surface mounting type.

28F0181-1SR-10

Laird Technologies

Laird Technologies' 28F0181-1SR-10 is a chip bead data line filter with dimensions of L8.51XB4.57XH3.05 (mm). It operates b/w -45 to 125 °C, has a max frequency of 900 MHz, and an output impedance of 115 OHM. Ideal for surface mount applications, it offers a max DC resistance of 0.001 ohm and rated current of 10 A.

T8112NLT

Pulse Electronics

TELECOM FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .7 A; Dimensions: L8.9XB6.3XH3.9 (mm)/L0.35XB0.248XH0.154 (inch); Rated Voltage: 80 V; Minimum Operating Temperature: -40 Cel;

B82722A2302N001

TDK

SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Terminal Finish: TIN OVER NICKEL; Packing Method: TRAY; JESD-609 Code: e3;

BNX028-01L

Murata Manufacturing

Murata Manufacturing's BNX028-01L is a data line filter with 2 functions, rated at 16V and 20A. It operates b/w -40°C to 105°C, offering high insulation resistance of 1100 Mohm. Ideal for surface mount applications in various electronic devices.

DLW21SN900HQ2L

Murata Manufacturing

DLW21SN900HQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 20V and 0.28A. It offers high insulation resistance of 10 Mohm, ideal for applications requiring noise suppression in data lines within a temperature range of -40 to 85°C.

CM1624-08DE

Onsemi

CM1624-08DE by Onsemi is a 4-function data line filter with a rated voltage of 2.5V, inductance of 0.02uH, and max DC resistance of 46 ohm. It operates b/w -40 to 85 °C and has dimensions of L3.4XB1.45XH0.55 (mm). Ideal for applications requiring efficient data line filtering in compact spaces.

BLM21PG221SN1D

Murata Manufacturing

Murata Manufacturing's BLM21PG221SN1D is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max frequency of 100MHz and DC resistance of 0.05 ohm. Ideal for data line filtering applications due to its ferrite material and output impedance of 220 ohm.

BLM31PG601SN1L

Murata Manufacturing

BLM31PG601SN1L by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L3.2xB1.6xH1.1 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.

74270053

Wurth Elektronik

The Wurth Elektronik 74270053 is a data line filter with a ferrite bead filter type. It has a max operating temperature of 125°C and min operating temperature of -25°C. With dimensions of D16.0XH28.5 (mm), it is suitable for stud mount applications and has an output impedance of 258 ohms.

SRF0504-351Y

Bourns

Bourns SRF0504-351Y is a 2-function data line filter with inductance of 1uH and rated voltage of 50V. It operates b/w -40°C to 125°C, has max DC resistance of 40 ohm, and output impedance of 250 ohm. Ideal for applications requiring surface mount filters in compact spaces.

10VSB1

TE Connectivity

The TE Connectivity 10VSB1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 3 dB at min frequency and 46 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.

CX0603MRX7R6BB104

Yageo

Yageo's CX0603MRX7R6BB104 is a data line filter with 10V rated voltage, 10000 Mohm insulation resistance, and 100000 uF capacitance. It is a feed through capacitor suitable for IEC approvals, operating b/w -55 to 125 °C, ideal for surface mount applications in various electronic devices.

7427927112

Wurth Elektronik

Wurth Elektronik 7427927112 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.35A. It operates b/w -55 to 125°C, has a DC resistance of 0.35 ohm, and an output impedance of 120Ω. Ideal for surface mount applications in electronics to reduce electromagnetic interference.

CM3440Z171B-10

Laird Technologies

CM3440Z171B-10 by Laird Technologies is a data line filter with 2 functions and 4 terminals. It operates b/w -40°C to 125°C, has a max DC resistance of 0.001 ohm, and an output impedance of 170 ohm. Ideal for applications requiring a rated current of 20 A, it features matte tin terminal finish and through-hole mounting.

Flash Devices 7,185

• Flash Memory Duplicators

• FlashCard Readers

• SIM Card Readers

• Smart Card Readers

General Purpose ICs 77,282

• Audio & Video Amplifiers

• Audio Control ICs

• Clock ICs

• Color Signal Converters

• Music & Sound Synthesizer ICs

• Noise Reduction ICs

• Other Function Consumer ICs

• Receiver ICs

• Remote Control ICs

• Signal Separator ICs

• Silicon Tuner ICs

• Superimposer Video ICs

• Teletext ICs

• Vertical Deflection ICs

STK415-120-E

Onsemi

STK415-120-E by Onsemi is a 80W, 2-channel audio amplifier with 0.8% harmonic distortion. It has a nominal bandwidth of 0.02 kHz and comes in a rectangular package style for flange mount applications. Ideal for audio and video amplification needs.

NCP2704FCCT1G

Onsemi

NCP2704FCCT1G by Onsemi is a 20-terminal audio amplifier IC with 2 channels, offering a nominal output power of 1.7W and operating at temperatures from -40 to 85°C. It features a package style of grid array, very thin profile, and fine pitch, suitable for applications in industrial-grade audio and video amplifiers requiring low power supplies ranging from 1.8V to 5.5V.

MAX41460GUB+T

Analog Devices

CONSUMER CIRCUIT; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;

TAS5424ATDKDQ1

Texas Instruments

AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: HSSOP; Package Shape: RECTANGULAR;

VS1053B-L

Vlsi Solution Oy

Other Consumer ICs;

MAX98357AETE+T

Analog Devices

Analog Devices' MAX98357AETE+T is a Class D audio amplifier with 5V power supply, 16 terminals, and 3mA max supply current. Its industrial-grade design operates from -40 to 85°C, making it ideal for audio applications in various industries. The chip carrier package with surface mount feature enhances its versatility and ease of integration.

STK433-840N-E

Onsemi

STK433-840N-E by Onsemi is a hybrid audio amplifier IC with +-25/+-30V power supplies. It features 2 functions, 23 terminals, and PLASTIC/EPOXY package body material. Ideal for audio and video amplification applications.

TAS5121DKDR

Texas Instruments

AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR;

PCM2903BDB

Texas Instruments

CONSUMER CIRCUIT; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;

LA4450L-E

Onsemi

AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Qualification: Not Qualified; Minimum Operating Temperature: -35 Cel; Technology: BIPOLAR;

ISL59601IRZ

Renesas Electronics

ISL59601IRZ by Renesas Electronics is a consumer circuit IC with 20 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with supply voltage ranging from 4.5V to 5.5V. Ideal for industrial applications requiring a compact design and surface mount compatibility at peak reflow temperatures up to 260°C.

MICRF113YM6-TR

Microchip Technology

MICRF113YM6-TR by Microchip Technology is a small outline IC with 6 terminals. It operates b/w -40 to 85°C, suitable for industrial applications. With a supply voltage range of 1.8V to 3.6V, it is ideal for consumer circuits requiring compact design and surface mount capability.

WM8804GEDS/RV

Cirrus Logic

WM8804GEDS/RV by Cirrus Logic is a consumer IC with 20 terminals, operating temperature range of -40 to 85°C. It features a small outline package style and CMOS technology, suitable for industrial applications requiring supply voltage b/w 2.7V to 3.6V.

TDA7563ASMTR

STMicroelectronics

CLASS AB AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 27; Package Code: ZIP; Package Shape: RECTANGULAR; Qualification: Not Qualified;

PTN36241GHXZ

NXP Semiconductors

PTN36241GHXZ by NXP Semiconductors is a consumer IC with 12 terminals in a rectangular chip carrier package. It operates b/w -40 to 85°C, with a supply voltage range of 1.7V to 1.9V. This IC is suitable for industrial applications requiring very thin profile components.

ADAU1451WBCPZ

Analog Devices

Analog Devices ADAU1451WBCPZ is a 72-terminal consumer IC with operating temp range -40 to 105°C. It features a supply voltage range of 2.97-3.63V and peak reflow temp of 260°C, suitable for industrial applications requiring high-performance audio processing in compact form factors.

SSM2377ACBZ-R7

Analog Devices

CLASS D AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: SQUARE;

MAX9820ETB+T

Analog Devices

MAX9820ETB+T by Analog Devices is a BICMOS audio amplifier with 2 channels. It operates b/w -40 to 85°C, with a supply voltage range of 2.7V to 5.5V. This small outline package is ideal for audio and video applications requiring low power output.

AD9949AKCPZRL

Analog Devices

CONSUMER CIRCUIT; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;

MAX98502EWE+T

Analog Devices

Analog Devices' MAX98502EWE+T is a Class D audio amplifier with 4.1W output power, ideal for industrial applications. With a wide operating temperature range (-40 to 85°C) and compact size (2.045mm x 2.045mm), it offers high gain of 20dB and operates on supply voltage from 2.5V to 5.5V, making it suitable for audio and video amplification in various electronic devices.

I/O & Storage Controllers 9,510

• Hard Drive Adapters

• Management Adapters

• Multiport Serial Adapters

• SCSI/RAID Controllers

• Serial/Parallel Adapters

• Serial/Ultra ATA Controllers

• USB/Firewire Adapters

Inductors 1,317,530

• Fixed Inductors

• Variable Inductors

XEL6030-471MEC

Coilcraft

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

DR125-470-R

Eaton Corporation

Eaton Corporation's DR125-470-R is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 2.71A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.

8451

Api Technologies

GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): PCB Mount; Shielded: NO; Surface Mount: NO; Terminal Placement: RADIAL;

1812SMS-22NGLC

Coilcraft

Coilcraft's 1812SMS-22NGLC is a surface mount fixed inductor with dual-ended terminals. It operates at a max temperature of 125°C and has a rated current of 3A. Ideal for RF applications, this general purpose inductor offers a nominal inductance of 0.022uH and features a self-resonance frequency of 3200MHz.

ETQP4M6R8KVK

Panasonic

Panasonic ETQP4M6R8KVK is a shielded, dual-ended fixed inductor with 6.8uH nominal inductance and 6.9A max rated current. Ideal for power applications, it features metal composite core material, -55 to 155 °C operating temp range, and AEC-Q200 reference standard compliance.

7447709331

Wurth Elektronik

Wurth Elektronik 7447709331 is a shielded, dual-ended power inductor with 330uH nominal inductance. Ideal for general purpose applications, it has a max rated current of 1.5A and operates b/w -40 to 125°C. Its compact SMT package measures 12x12x10mm and complies with AEC-Q200 standards.

MLG1005S6N2STD25

TDK

GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;

104CDMCCDS-470MC

Sumida

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

LQW15AN47NG00D

Murata Manufacturing

GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;

NR3015T2R2M

Taiyo Yuden

NR3015T2R2M by Taiyo Yuden is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.48A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 64MHz and operates b/w -25°C to 120°C.

0402DC-8N2XGRW

Coilcraft

0402DC-8N2XGRW by Coilcraft is a fixed inductor with 0.0082 uH nominal inductance, 1.6 A max rated current, and 8330 MHz self-resonance frequency. Ideal for RF applications due to its rectangular package shape and ceramic core material. Operating temperature range from -40 to 125 °C.

1812SMS-R12GLC

Coilcraft

Coilcraft's 1812SMS-R12GLC is a surface mount fixed inductor with dual-ended terminals, ideal for RF applications. Featuring a nominal inductance of 0.12 uH and max rated current of 1.5 A, it offers high quality factor and operates b/w -40 to 125 °C.

0402CS-3N3XGRW

Coilcraft

0402CS-3N3XGRW by Coilcraft is a surface mount RF inductor with 0.0033 uH nominal inductance, 7000 MHz self-resonance frequency, and 125 °C max operating temperature. Ideal for general purpose applications requiring high-frequency performance in compact designs.

MLF1608DR56JT000

TDK

The TDK MLF1608DR56JT000 is a shielded, surface mount fixed inductor with 0.56 uH nominal inductance. Ideal for RF applications, it has a max operating temperature of 125°C and self-resonance frequency of 170 MHz. With dual-ended terminals and compact 0603 size, it offers high quality factor and low DC resistance.

XGL6060-333MEC

Coilcraft

Coilcraft XGL6060-333MEC is a shielded, surface mount fixed inductor with 33uH nominal inductance and 4.9A max rated current. Ideal for power applications, it has dual-ended terminals and operates b/w -40°C to 125°C.

HC3

Lcr Capacitors (Eu)

HC3 by Lcr Capacitors (Eu) is a fixed inductor with 1000uH nominal inductance, 25A max rated current, and 60°C max operating temp. Ideal for high current applications, it features radial terminal placement and flexible lead shape in a rectangular package.

IHLP1616BZER2R2M11

Vishay Intertechnology

Vishay Intertechnology's IHLP1616BZER2R2M11 is a shielded, high current inductor with 2.2uH nominal inductance and 3.25A max rated current. Ideal for general purpose applications, this SMT inductor has a compact 1616 size package and operates b/w -55°C to 125°C temperature range.

XAL1580-532MED

Coilcraft

Coilcraft's XAL1580-532MED is a shielded, surface mount fixed inductor with 5.3uH nominal inductance and 26.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and features a self-resonance frequency of 11.8MHz.

SRP7028A-4R7M

Bourns

Bourns SRP7028A-4R7M is a shielded SMT inductor with 4.7uH nominal inductance, 5.5A max current, and 150°C max operating temp. Ideal for power applications due to its high quality factor and AEC-Q200 reference standard compliance.

LPD3015-561MRC

Coilcraft

Coilcraft LPD3015-561MRC is a shielded SMT inductor with 0.56uH nominal inductance, 1.37A max current, and 235MHz self-resonance freq. Ideal for common mode choke applications due to its ferrite core material and compact 3x3mm rectangular package design.

Interface ICs 156,552

• Data Bus Terminators

• Drive Electronics

• Graphics Display Drivers

• Line Drivers & Receivers

• MOSFET Gate Drivers

• Other Function Interface ICs

• Peripheral Drivers

• Voltage Level Translators

MAX3072EASA+T

Analog Devices

MAX3072EASA+T by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 1.5mA supply current and has a max transmit delay of 1500ns. Ideal for automotive applications due to its wide temperature range and small outline package style.

IX4428MTR

Littelfuse

IX4428MTR by Littelfuse is a MOSFET Gate Driver with 2 functions, operating at -40 to 125 °C. It has a supply voltage range of 4.5-30 V and peak current limit of 1.5 A. Ideal for automotive applications due to its small outline package and high temperature grade.

IR2214SSPBF

Infineon Technologies

IR2214SSPBF by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 20V and built-in protections for transient, over current, and under voltage. It is designed for automotive applications, featuring a small outline package style with dual terminal position and Gull Wing terminal form. The device operates in temperatures ranging from -40°C to 125°C, making it suitable for harsh environments.

MAX3232EIPWRQ1

Texas Instruments

MAX3232EIPWRQ1 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F, TIA-232-F, V.28 interfaces. Ideal for industrial applications requiring inverted output polarity and Schmitt trigger input characteristics.

TPS2023DR

Texas Instruments

TPS2023DR by Texas Instruments is a MOS technology-based peripheral driver with 8 terminals. It offers built-in protections for transient, over current, thermal, and under voltage conditions. With a max output current of 1.5A and operating temperature range from -40 to 125°C, it's ideal for industrial applications requiring source flow direction control.

PI4IOE5V9535ZDEX

Diodes Incorporated

INTERFACE CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

ISL83485IB

Renesas Electronics

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LTC2850IS8#PBF

Analog Devices

LTC2850IS8#PBF by Analog Devices is an 8-terminal line driver with CMOS technology. It operates at a supply voltage range of 3V to 3.6V, offering differential output and EIA-485-A interface standard. With a small outline package style, it suits industrial applications requiring fast transmit and receive delays under 50ns and 70ns respectively.

MAX232EWE+

Analog Devices

MAX232EWE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and can withstand temperatures from -40 to 85°C. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28, or V.24 interface standards.

ITS716GFUMA1

Infineon Technologies

ITS716GFUMA1 by Infineon Technologies is a Peripheral Driver with 4 functions, operating at 5.5-40V. It offers built-in protections for transient, over current, and over voltage events. Ideal for applications requiring a small outline package and sink output current flow direction.

MC100EPT22DTG

Onsemi

TTL/CMOS TO PECL TRANSLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;

LTC7001IMSE#TRPBF

Analog Devices

LTC7001IMSE#TRPBF by Analog Devices is a MOSFET gate driver with a max supply voltage of 135V and turn-on/off time of 70us. It is designed for automotive applications, featuring a small outline package style and dual terminal position. This CMOS technology-based driver operates in temperatures ranging from -40 to 125°C.

LC75812PTH-8565-H

Onsemi

LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;

ADUM1241ARZ-RL7

Analog Devices

ADUM1241ARZ-RL7 by Analog Devices is a dual-function interface IC with 2 functions, operating at 2.25-3.6V. It has a small outline package style suitable for automotive applications, with temperature range of -40 to 125°C and terminal finish in matte tin.

MCP1662T-E/OT

Microchip Technology

MCP1662T-E/OT by Microchip Technology is a graphics display driver with 3.3V power supply, operating temperature range of -40 to 125 °C, and terminal finish in matte tin. It has 5 terminals, small outline package style, and is suitable for automotive applications as an LED display driver interface IC.

MAX3082CPA+

Analog Devices

MAX3082CPA+ by Analog Devices is a Line Driver & Receiver with 5V supply, 2600ns max transmit delay, and EIA-422; EIA-485 interface standard. Ideal for industrial applications requiring reliable data transmission over long distances.

DS26C31TMX/NOPB

Texas Instruments

DS26C31TMX/NOPB by Texas Instruments is a 4-function line driver with 3-STATE output and TRUE polarity. It operates at industrial temperature range (-40 to 85 °C) with a supply voltage of 4.5-5.5 V, making it suitable for EIA-422 interface applications requiring differential outputs and low power consumption (2 mA).

MAX253CSA+T

Analog Devices

MAX253CSA+T by Analog Devices is a CMOS interface IC with 8 terminals, operating at 0-70°C. It has a supply voltage range of 4.5-5.5V and comes in a small outline package for surface mounting applications. Ideal for commercial-grade projects requiring an interface circuit with dual terminal position and matte tin finish.

MAX3160ECAP+T

Analog Devices

Analog Devices' MAX3160ECAP+T is a Line Driver & Receiver with 20 terminals, operating at 3-5.5V. It offers differential outputs, EIA-232/422/485 interface standards, and CMOS technology. Ideal for applications requiring fast transmit delay of 800ns and low output current of 2.5A in commercial temperature range of 0-70°C.

MAX3430ESA+T

Analog Devices

MAX3430ESA+T by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 8 terminals and offers differential output. Ideal for industrial applications requiring reliable communication over short distances.

Logic ICs 653,080

• Bus Driver & Transceivers

• Clock Drivers & Buffers

• Decoder & Drivers

• Delay Lines

• Digital Arithmetic Circuits

• Digital Counters

• Digital Shift Registers

• Latches & Flip-Flops

• Logic Gates

• Multiplexer & Demultiplexer

• Other Function Logic ICs

• Prescaler & Multivibrators

74HCT125D,653

NXP Semiconductors

NXP Semiconductors' 74HCT125D,653 is a CMOS bus driver with 4 functions and 3-STATE output. It operates at a supply voltage of 5V, has a propagation delay of 38ns, and can handle up to 6A current. Ideal for automotive applications due to its temperature grade and small outline package style.

CY2305SXI-1T

Infineon Technologies

CY2305SXI-1T clock driver by Infineon operates at 3.3V, with 8 true outputs and a max frequency of 133.33MHz. It features a propagation delay of 8.7ns, suitable for industrial applications requiring precise timing synchronization in compact designs. This small outline package with gull wing terminals is ideal for surface mount PCBs in temperature-sensitive environments.

74AC245MTCX

Onsemi

74AC245MTCX by Onsemi is a bus driver & transceiver with 8 bits and a propagation delay of 9 ns. It operates at a nominal voltage of 3.3V and has a small outline, thin profile package style. This IC is commonly used in industrial applications requiring bidirectional control.

MM74HCT05MX

Onsemi

MM74HCT05MX by Onsemi is a logic gate with 6 functions and 1 input. It has a propagation delay of 28 ns and operates at a nominal voltage of 5V. This small outline package is commonly used in industrial applications requiring CMOS technology.

74VHC541MTCX

Onsemi

74VHC541MTCX by Onsemi is an 8-bit bus driver with a propagation delay of 8 ns at 3.3 V supply voltage. It features a small outline package, operates in industrial temperature range (-40 to 85 °C), and has dual terminal position for various applications requiring true output polarity control.

74LVC1GU04GW,125

NXP Semiconductors

NXP Semiconductors' 74LVC1GU04GW,125 is a CMOS Logic Gate with Vsup of 1.8V and tpd of 6.5ns. It operates in automotive-grade temperature range (-40 to 125 °C) and has a load capacitance of 50pF. Ideal for applications requiring fast propagation delay and low power consumption in compact designs.

MC10EP451FAG

Onsemi

MC10EP451FAG by Onsemi is a 6-bit ECL latch with 0.55 ns propagation delay. It operates at -40 to 85°C, ideal for industrial applications. With a max frequency of 3GHz and Vsup range of 3-5.5V, it's suitable for high-speed digital systems.

CD74HC259M

Texas Instruments

CD74HC259M by Texas Instruments is an 8-bit latches & flip-flops IC with a propagation delay of 28ns. It operates at a nominal voltage of 4.5V and has a load capacitance of 50pF. This CMOS technology device is ideal for military-grade applications requiring low-level trigger type and true output polarity.

HEF40244BT,653

NXP Semiconductors

BUS DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;

MC100LVEP11DTG

Onsemi

MC100LVEP11DTG clock driver by Onsemi features 0.31 ns propagation delay, 2.5V nominal voltage, and 50mA max power supply current. Ideal for industrial applications requiring differential input conditioning and fast signal propagation in a compact thin profile package.

HEF4047BT,653

NXP Semiconductors

HEF4047BT,653 by NXP Semiconductors is a CMOS Prescaler & Multivibrator with 320 ns Propagation Delay. It operates at a Nominal Voltage of 5V and has a Temperature Range of -40 to 85°C. This versatile component with 14 terminals is ideal for industrial applications requiring precise timing and signal processing.

NB6HQ14MMNHTBG

Onsemi

LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;

PI6CBF18501ZLAIEX

Diodes Incorporated

LOW SKEW CLOCK DRIVER;

74HC595PW,118

NXP Semiconductors

NXP Semiconductors' 74HC595PW,118 is an 8-bit digital shift register with a propagation delay of 265 ns. Operating at a frequency of up to 20 MHz, it supports a supply voltage range of 2-6V and features positive edge triggering. Ideal for automotive applications due to its small form factor and true output polarity.

NL7SZ57DFT2G

Onsemi

NL7SZ57DFT2G by Onsemi is a CMOS logic IC with 6.3ns propagation delay, operating at 2.3V to 5.5V. It features Schmitt Trigger and has a MILITARY temperature grade, suitable for applications requiring fast response times in harsh environments. The small outline package with dual terminals makes it ideal for compact electronic designs needing high-speed signal processing capabilities.

SN74LVC1G139DCUT

Texas Instruments

SN74LVC1G139DCUT by Texas Instruments is a CMOS Decoder & Driver with 5.9ns Propagation Delay, 32A Max I (ol), and -40 to 85°C Operating Temperature range. Ideal for applications requiring fast signal processing in industrial environments.

74AUP1G80GF,132

NXP Semiconductors

D FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR;

542MLFT

Renesas Electronics

Renesas Electronics clock driver 542MLFT features 15ns propagation delay, 3.3V nominal voltage, and 25A max I (ol). Ideal for applications requiring precise timing control in commercial-grade environments.

MM74HCT540MTCX

Onsemi

MM74HCT540MTCX by Onsemi is an 8-bit bus driver with 25ns propagation delay at 5V. It features a small outline package, operates in industrial temperature range (-40 to 85 °C), and has inverted output polarity. Ideal for applications requiring fast signal transmission and low power consumption.

74LVC2G02GT,115

NXP Semiconductors

NOR GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: VSON; Package Shape: RECTANGULAR;

Memory 155,302

• Cache Memory

• Memory Cards

• Memory Expansion Boards

• RAM Modules

• ROM Modules

Memory ICs 1,527,471

• DRAM

• EEPROM

• EPROM

• FIFO

• FRAMs

• Flash Memory

• MASK ROM

• MRAMs

• OTP ROM

• Other Function Memory ICs

• SRAM

R1LP0108ESN-5SI#S1

Renesas Electronics

Renesas Electronics' R1LP0108ESN-5SI#S1 is a 128Kx8 SRAM with 55ns access time, operating at 5V. It features industrial temperature grade, parallel interface, and Gull Wing terminals. Ideal for applications requiring fast and reliable memory storage in harsh environments.

M24C32-FMC6TG

STMicroelectronics

STMicroelectronics' M24C32-FMC6TG is an EEPROM with 4Kx8 organization, operating at 1.8V, and featuring I2C serial bus type. It has a max clock frequency of 0.4 MHz and can endure up to 1,000,000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.

SST26VF064B-104I/MF

Microchip Technology

SST26VF064B-104I/MF by Microchip: NOR flash memory with 64Mx1 organization, SPI serial bus type, and 104 MHz clock frequency. Ideal for industrial applications requiring high endurance with 100K write/erase cycles and operating temperature range of -40 to 85°C.

CY62148GN-45SXI

Infineon Technologies

CY62148GN-45SXI by Infineon Technologies is a 512Kx8 SRAM with 45ns access time, operating at 5V. It features a small outline package, GULL WING terminals, and industrial temperature grade. Ideal for applications requiring fast and reliable parallel memory storage in harsh environments.

IS42S32400F-7BLI-TR

Integrated Silicon Solution

IS42S32400F-7BLI-TR by Integrated Silicon Solution is a 4MX32 DRAM with 3.3V supply, operating at -40 to 85 °C. Featuring a max clock frequency of 143 MHz, it suits industrial applications requiring high memory density and fast access times.

MT47H32M16NF-25EIT:H

Micron Technology

Micron Technology's MT47H32M16NF-25EIT:H is a DDR2 DRAM with 32MX16 organization, operating at 400 MHz. It features a 1.8V supply voltage, 84 terminals in a thin profile grid array package, and AEC-Q100 screening for industrial applications.

AT25DF641A-MH-Y

Renesas Electronics

AT25DF641A-MH-Y by Renesas Electronics is a NOR type flash memory with 64Mx1 organization, operating at up to 85MHz clock frequency. It features hardware write protection and offers 100,000 write/erase cycles endurance. Ideal for industrial applications requiring reliable data storage in a compact 8-terminal package.

CY62148ELL-55SXI

Infineon Technologies

CY62148ELL-55SXI by Infineon Technologies is a 512Kx8 SRAM with 55ns access time, operating at 5V. It features a small outline package, industrial temperature grade, and Gull Wing terminal form. Ideal for applications requiring fast and reliable memory storage in industrial environments.

DS1265AB-70IND+

Analog Devices

NON-VOLATILE SRAM MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 36; Package Code: DIP; Package Shape: RECTANGULAR; Package Equivalence Code: DIP36,.6;

TS2GUSDC

Transcend Information

TS2GUSDC by Transcend Information is a NOR type Flash Memory with 2GX8 organization, operating from -25 to 85 °C. It has a memory density of 17179869184 bit and operates at supply voltages b/w 2.7V to 3.6V. Ideal for applications requiring high-speed data storage in devices like smartphones and tablets due to its compact rectangular shape and asynchronous operation mode.

M24C01-RMN6TP

STMicroelectronics

M24C01-RMN6TP by STMicroelectronics is an EEPROM with 1024-bit memory density, operating at a max clock frequency of 0.4 MHz. It features I2C serial bus type and offers 1000000 write/erase cycles endurance. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact small outline package style.

SN74ACT7203L50NP

Texas Instruments

OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Power Supplies (V): 5;

SDINBDG4-16G

Western Digital

SDINBDG4-16G by Western Digital is a 16GX8 MLC NAND flash memory with 17179869184 words capacity. It operates at 3.3V, offers 3000 Write/Erase Cycles endurance, and has a memory density of 137438953472 bits. Ideal for applications requiring high-speed data storage in compact devices.

24AA512T-I/SM

Microchip Technology

EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 1;

25LC320-I/SN

Microchip Technology

EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Clock Frequency (fCLK): 2 MHz;

24LC256-I/P

Microchip Technology

24LC256-I/P by Microchip Technology is an EEPROM with 32KX8 organization, operating at 4.5V. It features I2C control byte 1010DDDR and offers 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage with a max clock frequency of 0.4 MHz.

M25P40-VMN6TPB

Micron Technology

M25P40-VMN6TPB by Micron Technology is a NOR type Flash Memory with 512Kx8 organization, operating at 50 MHz clock frequency. It offers 100000 Write/Erase cycles endurance and SPI serial bus interface. Ideal for industrial applications requiring reliable data storage in a compact form factor.

S25FL064LABMFV010

Infineon Technologies

S25FL064LABMFV010 by Infineon Technologies is a 16MX4 flash memory with 108 MHz clock frequency, suitable for industrial applications. It operates at 3V with synchronous mode and has a memory density of 67108864 bits. The small outline package is square-shaped, surface mountable, and has dual terminals.

IS43TR16128DL-107MBLI

Integrated Silicon Solution

DDR3L DRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 96; Package Code: TFBGA; Refresh Cycles: 8192; Package Shape: RECTANGULAR;

W25N01GVZEIGTR

Winbond Electronics

W25N01GVZEIGTR by Winbond Electronics is a 1Gx1 SLC NAND flash memory with 1073741824-bit memory density. It operates at up to 104MHz clock frequency, has a supply voltage range of 2.7V to 3.6V, and is suitable for industrial temperature grade applications. The package style is small outline with very thin profile, making it ideal for space-constrained designs requiring high-speed data storage.

Miscellaneous Components 7,732,676

• Additional Parts

Optoelectronics 24,698,153

FODM2705R2

Onsemi

FODM2705R2 by Onsemi is a single optocoupler with max forward current of 0.05A, operating temp range -40 to 100°C, and isolation voltage of 3750V. Ideal for AC input-transistor output applications in surface mount configurations.

SFH620A-3

Vishay Intertechnology

Vishay Intertechnology's SFH620A-3 is a single optocoupler with max. forward current of 0.06 A, operating temp. range -55 to 100°C, and isolation voltage of 5300 V. Ideal for AC input-transistor output applications due to its high collector-emitter breakdown voltage, low dark current, and nominal current transfer ratio of 100%.

ASMT-RR45-AQ902

Broadcom

ASMT-RR45-AQ902 by Broadcom is a 1.1mm SINGLE COLOR LED with peak wavelength of 636nm, ideal for applications requiring RED light emission. With a max forward current of 0.02A and viewing angle of 145°, it's suitable for surface mount installations in various electronic devices.

PS2811-1-F3-A

Renesas Electronics

PS2811-1-F3-A by Renesas Electronics is a SINGLE optocoupler with 0.05A forward current, 40V breakdown voltage, and 200% transfer ratio. It operates b/w -55°C to 100°C, offering 2500V isolation. Ideal for applications requiring high-voltage signal isolation in harsh environments.

ALMD-LL36-WZ002

Broadcom

SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2140.0; Lens Type: TINTED DIFFUSED; Terminal Finish: SILVER;

SMS1105BWC

Bivar

Bivar's SMS1105BWC is a WATER CLEAR BLUE LED with 0.03A max forward current, 120° viewing angle, and 450.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its compact RECTANGULAR shape and SINGLE COLOR configuration.

DLP3010LCFQK

Texas Instruments

OPTOELECTRONIC DEVICE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 57; Terminal Finish: NICKEL GOLD; Minimum Supply Voltage: 1.65 V; Peak Wavelength (nm): 700;

L-130WDT/1EGW

Kingbright Electronic

DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 30.0/25.0; Lens Type: DIFFUSED WHITE; Minimum Operating Temperature: -40 Cel;

TSOP32538

Vishay Intertechnology

LINEAR OUTPUT PHOTO IC; Mounting Feature: THROUGH HOLE MOUNT; No. of Functions: 1; Application: REMOTE CONTROL; Nominal Supply Voltage: 3.3 V; Configuration: SINGLE;

HSMA-C170-T0000

Broadcom

HSMA-C170-T0000 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 595nm and high brightness amber color. Ideal for surface mount applications, it has max forward current of 0.025A and viewing angle of 155°. Perfect for electronics requiring compact, efficient lighting solutions.

TLP3555A(TP1,F

Toshiba

Toshiba's TLP3555A(TP1,F is a single solid state relay with a control current of 0.03 A and max forward current of 3 A. Featuring MOSFET output circuit type, it operates b/w -40 to 85°C, with an isolation voltage of 2500 V. Ideal for DC input applications, this transistor output SSR has a compact size suitable for surface mounting methods.

ILD620GB

Vishay Intertechnology

Vishay Intertechnology's ILD620GB is a 2-channel optocoupler with max forward current of 0.06A and isolation voltage of 5300V. Ideal for AC input-transistor output applications, it operates b/w -55°C to 100°C, with a collector-emitter breakdown voltage of 70V.

HLMP1790

Cml Technologies & Kg

HLMP1790 by Cml Technologies & Kg is a 3mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.0075A, it's ideal for applications requiring high efficiency green light emission in a compact form factor.

PVG612ASPBF

Infineon Technologies

PVG612ASPBF by Infineon Technologies is a single solid state relay with a control current of 0.005 A and max forward current of 0.025 A. Featuring a MOSFET output circuit type, it has a max on-state resistance of 0.1 ohm and isolation voltage of 4000 V. This optoelectronic transistor output SSR operates b/w -40 to 85°C, making it suitable for various DC input applications requiring up to 2 A on-state current.

PS2701A-1-A

Renesas Electronics

PS2701A-1-A by Renesas Electronics is a SINGLE optocoupler with max. forward current of 0.03 A, operating temp. range -55 to 100°C, and isolation voltage of 3750 V. It's used in applications requiring transistor output optocouplers with collector-emitter breakdown voltage of 70V and nominal current transfer ratio of 50%.

SFH6156-3T

Vishay Intertechnology

Vishay Intertechnology SFH6156-3T is a single optocoupler with max. forward current of 0.06A, operating temp. range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in harsh environments.

G3VM-61WR(TR05)

Omron

TRANSISTOR OUTPUT SSR;

HCPL3700SDV

Onsemi

HCPL3700SDV by Onsemi is a Logic IC Output Optocoupler with a max forward current of 0.05A and isolation voltage of 2500V. It operates b/w temperatures of 0 to 70°C, has a response time of 40000ns, and requires a nominal voltage of 5V. Ideal for applications requiring surface mounting features in optocoupler circuit outputs.

LCC110STR

Littelfuse

Littelfuse LCC110STR is a dual solid state relay with 0.008 A control current and 0.05 A max forward current. Featuring MOSFET output circuit, it operates b/w -40 to 85°C, with 3750 V isolation voltage. Ideal for DC input applications requiring simultaneous operation in compact spaces due to its low profile design of 3.3 mm height and 9.65 mm length.

HDLO-2416

Broadcom

HDLO-2416 by Broadcom is a SMART/NORMAL 5x7 LED display with peak wavelength of 635nm. It operates b/w -40°C to 85°C, featuring high efficiency red color at 5.08mm height. Ideal for applications requiring complex configurations and displaying up to 4 functions in a compact space.

Oscillators 101,040,299

SIT8009BI-81-33E-125.003125

Sitime

LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;

HMC587LC4BTR

Analog Devices

Analog Devices' HMC587LC4BTR is a ceramic-packaged oscillator with 5V supply, operating at frequencies from 5-10 GHz. With 24 terminals and gold over nickel finish, it's ideal for applications requiring precise timing in temperature ranges of -40 to 85°C.

DSC1102CI1-135.0000

Microchip Technology

LVPECL; Mounting Feature: SURFACE MOUNT; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.2mm x 2.5mm x 0.85mm; Minimum Operating Temperature: -40 Cel;

SIT9102AI-243N25E200.00000X

Sitime

SIT9102AI-243N25E200.00000X by Sitime is a LVDS XO Clock Oscillator with 50% Frequency Stability, 200 MHz Nominal Operating Frequency, and MIL-STD-883 Screening Level. Ideal for applications requiring precise timing in harsh environments like aerospace and defense due to its small size (7mm x 5mm x 0.9mm) and wide temperature range (-40°C to 85°C).

DSC1124CE1-100.0000

Microchip Technology

HCSL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Additional Features: ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; TUBE;

LMK60A0-148M50SIAT

Texas Instruments

LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;

DSC1123CI2-150.0000T

Microchip Technology

DSC1123CI2-150.0000T by Microchip Technology is a LVDS XO Clock Oscillator with 25% frequency stability, operating at 150 MHz. It has a supply voltage range of 2.25V to 3.63V and operates in temperatures from -40°C to 85°C. Ideal for applications requiring precise timing such as networking equipment and communication systems due to its high-frequency accuracy and compact size.

MC2016K50.0000C16ESH

Kyocera

Kyocera's MC2016K50.0000C16ESH is a 50 MHz XO Clock Oscillator with 50% frequency stability, CMOS type, and 15 pF output load. Ideal for applications requiring precise timing in a compact form factor like IoT devices or communication systems.

SIT8008BC-13-33S-13.560000

Sitime

LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);

SIT8920BM-32-33E-50.000000

Sitime

LVCMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 5.0mm x 3.2mm x 0.75mm; Nominal Operating Frequency: 50 MHz;

DSC1123CI1-027.0000

Microchip Technology

DSC1123CI1-027.0000 by Microchip is a LVDS XO Clock Oscillator with 27MHz frequency, 50% stability, and 100 OHM output load. It operates b/w -40 to 85 °C, suitable for applications requiring precise timing in electronic devices. With compact dimensions of 3.2mm x 2.5mm x 0.85mm and surface mount feature, it's ideal for space-constrained designs.

DSC1123CI3-135.0000

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 135 MHz; Maximum Supply Voltage: 3.63 V;

SIT8209AI-21-33S-100.000000

Sitime

LVCMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45; Maximum Rise Time: 2 ms;

DSC1103CI2-106.2500T

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 52/48; Maximum Supply Voltage: 3.6 V;

SIT8008BC-13-33E-25.000000

Sitime

LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Output Low Current: 4 Amp;

LMK62E0-156M25SIAT

Texas Instruments

LVPECL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 156.25 MHz;

DSC1103CL1-026.0000

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.2mm x 2.5mm x 0.9mm;

DSC1123CI2-200.0000

Microchip Technology

DSC1123CI2-200.0000 by Microchip: LVDS XO Clock Oscillator with 200MHz freq, 25% stability, and 3.6V max supply. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm package, such as telecommunications and networking equipment.

626L10005I3T

Cts

Cts 626L10005I3T is a LVDS XO Clock Oscillator with 100MHz frequency, 25% stability, and 3.465V max supply voltage. Ideal for high-speed digital applications requiring precise timing in compact designs.

DSC1103CL3-093.4400

Microchip Technology

LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;

Other Function Semiconductors 11,318,258

• Analog Computational

• Analog Waveform Generation

• Automotive ICs

• Motion Control ICs

• Multiplexers & Switches

• Other Function Analog ICs

• Other Function Semiconductors

• Phase Locked Loops (PLL) & Frequency Synthesis Circuits

• Power Management ICs

• Power Supply Modules

• Switching Regulators & Controllers

• Voltage References

LTC3786EMSE#TRPBF

Analog Devices

LTC3786EMSE#TRPBF by Analog Devices is a current-mode switching controller with a max switching frequency of 900 kHz. It operates b/w 0-85°C, suitable for various applications requiring pulse width modulation control technique. With a nominal input voltage of 12V and output voltage of 5.4V, it is ideal for compact designs in automotive and industrial electronics.

VTX-214-005-112

Vigortronix Uk

AC-DC REGULATED POWER SUPPLY MODULE;

LB11861MC-AH

Onsemi

LB11861MC-AH by Onsemi is a Motion Control IC with 12V supply voltage, 1.2A output current, and bipolar technology. Ideal for brushless DC motor control applications due to its small outline package, dual terminal position, and operating temperature range of -30 to 90°C.

MAX6701SKA+T

Analog Devices

Analog Devices' MAX6701SKA+T is a Power Management IC with 3/3.3V power supplies, suitable for automotive applications. It features a small outline package, dual terminals, and operates b/w -40 to 125°C. Ideal for power supply management circuits in compact designs.

ADG714BRUZ-REEL7

Analog Devices

ADG714BRUZ-REEL7 by Analog Devices is an 8-channel SPST multiplexer switch with a max on-state resistance of 4.5 ohm and switching voltage up to 2.5 V, suitable for industrial applications. It operates at temperatures ranging from -40°C to 85°C, with a compact package style of small outline and thin profile for space-constrained designs. The device features CMOS technology and matte tin terminal finish, making it ideal for various electronic systems requiring precise signal routing.

R-78C12-1.0

Recom Power

R-78C12-1.0 by Recom Power is a DC-DC regulated power supply module with a nominal output voltage of 12V and max total power output of 1W. It operates in temperatures ranging from -40°C to 68°C, making it suitable for various applications requiring stable power supply in compact spaces. With a package style of microelectronic assembly, this module is ideal for use in electronic devices where space is limited.

MAX327CSE+

Analog Devices

SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

FAN54511AUCX

Onsemi

POWER SUPPLY SUPPORT CIRCUIT; No. of Terminals: 63; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: BGA63,9X7,16;

LTM4622IY

Analog Devices

Analog Devices' LTM4622IY is a 25-terminal switching regulator with a max operating temperature of 125°C. It features current-mode control, pulse width modulation, and a buck switcher configuration. Ideal for automotive applications due to its moisture sensitivity level of 4 and wide input voltage range from 3.6V to 20V.

LTC4269IDKD-1#TRPBF

Analog Devices

LTC4269IDKD-1#TRPBF by Analog Devices is a switching controller with 32 terminals, operating b/w -40 to 85 °C. It uses current-mode control technique, CMOS technology, and supports PWM. Ideal for industrial applications requiring a single switcher configuration with input voltage range of 12-18 V and max frequency of 110 kHz.

TEP150-2412WI

Traco Electronic Ag

TEP150-2412WI by Traco Electronic Ag is a DC-DC regulated power supply module with a max output current of 12.5 A and a max total power output of 150 W. It is suitable for applications requiring a nominal output voltage of 12 V, such as industrial automation and telecommunications equipment.

MCP1603T-330I/OS

Microchip Technology

MCP1603T-330I/OS by Microchip Technology is a current-mode switching regulator with a max output current of 0.5A and a max switching frequency of 2800 kHz. It operates in industrial temperature grade range, suitable for applications requiring precise voltage regulation in compact spaces. The device supports buck switcher configuration and has a nominal output voltage of 3.3V, making it ideal for various electronic systems.

NCP1615C4DR2G

Onsemi

POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 15; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

E-L6219DS

STMicroelectronics

E-L6219DS by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage of 5V, and max output current of 1A. Ideal for stepper motor control applications, it features a small outline package shape, dual terminal position, and operates b/w -20 to 85°C temperature range.

ADG426BRSZ-REEL

Analog Devices

ADG426BRSZ-REEL by Analog Devices is a 16-channel single-ended multiplexer with a max on-state resistance of 80 ohm. It operates at industrial temperature grade (-40 to 85 °C) and has a small outline package style. Ideal for applications requiring high channel count and low on-state resistance in harsh environments.

74LVC1G3157GM,132

NXP Semiconductors

NXP Semiconductors' 74LVC1G3157GM,132 is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and has a max on-state resistance of 38 ohm. With a small outline package style, it is suitable for automotive applications requiring fast switching times and low power consumption.

74HCT4046AD,118

NXP Semiconductors

NXP Semiconductors' 74HCT4046AD,118 is a PLL frequency synthesizer with Vsup ranging from 4.5V to 5.5V. It has 16 terminals in a small outline package, suitable for automotive applications due to its wide operating temperature range of -40°C to 125°C. The IC features Gull Wing terminal form and CMOS technology for reliable performance in various electronic systems.

MAX4906FELB+T

Analog Devices

SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;

E-L9758BBTR

STMicroelectronics

SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

NCP380HSN10AAT1G

Onsemi

NCP380HSN10AAT1G by Onsemi is a Power Management IC with 5V nominal voltage, -40 to 85°C operating temperature range, and 2.5-5.5V supply voltage support. It is used in industrial applications for power supply support circuits due to its small outline package and dual terminal position.

Passive Component Networks 2,424,243

• Resistor & Capacitor Networks

Peripheral ICs 1,184,087

MK20DX128VFM5

NXP Semiconductors

NXP Semiconductors' MK20DX128VFM5 is a 32-bit microcontroller with Cortex-M4 CPU, offering 131072 ROM words and 16384 RAM bytes. It operates at up to 50 MHz, features 6-Ch 16-Bit ADCs, and supports PWM channels. Ideal for industrial applications requiring high-speed processing and multiple connectivity options like I2C, I2S, SPI, and UART.

PM40028B1-F3EI

Microchip Technology

PM40028B1-F3EI by Microchip Technology is a bus controller IC with 753 terminals in a square plastic/epoxy package. It supports I2C, SMBUS, and UART buses, making it ideal for PCI applications requiring CMOS technology and surface mount installation.

USB2422/MJ

Microchip Technology

USB2422/MJ by Microchip Technology is a BUS CONTROLLER IC with 24 terminals, operating at 3-3.6V. It supports SMBUS and USB buses, with a max supply current of 89mA. Ideal for applications requiring universal serial bus connectivity in commercial temperature environments up to 70°C.

ATSAMC21J18A-AUT

Microchip Technology

Microchip Technology's ATSAMC21J18A-AUT is a Cortex-M0+ microcontroller with 32-bit architecture, 5.5V max supply voltage, and 48MHz clock frequency. Ideal for industrial applications, it features 52 I/O lines, 8 timers, and low power mode for efficient performance in various embedded systems.

EFM32G210F128G-E-QFN32R

Silicon Labs

Silicon Labs EFM32G210F128G-E-QFN32R is a 32-bit microcontroller with 16-bit address bus, 3.8V max supply voltage, and 85°C max operating temp. Ideal for industrial applications, it features ADC/DAC channels, 11 timers, and peripherals like UART/I2C/USART for connectivity at a clock frequency of up to 32MHz.

PIC18F46Q10T-I/PT

Microchip Technology

The Microchip Technology PIC18F46Q10T-I/PT microcontroller features 44 terminals, 8-bit data RAM, and a max clock frequency of 64 MHz. Ideal for industrial applications requiring low power consumption, it offers 35-channel ADC, 1-channel DAC, and various peripherals like BOR and PWM for versatile connectivity options.

DS1243Y-120+

Analog Devices

DS1243Y-120+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with 8-bit External Data Bus Width. It operates b/w 0-70 °C, with Supply Voltage range of 4.5-5.5 V. Suitable for applications requiring PARALLEL, DIRECT ADDRESS access method in commercial temperature grade environments.

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

STM32L031E6Y6TR

STMicroelectronics

STM32L031E6Y6TR by STMicroelectronics is a 32-bit microcontroller with 25 terminals, operating at up to 25 MHz. It features 10-Ch 12-Bit ADC channels, 7 DMA channels, and peripherals like BOR, PWM(2), and RTC. Ideal for industrial applications requiring low power consumption and high-performance computing in compact designs.

CP82C55AZ

Renesas Electronics

CP82C55AZ by Renesas Electronics is a Parallel I/O Ports IC with 24 I/O lines, operating at 5V. It features a rectangular package style, with 40 terminals and a supply voltage range of 4.5V to 5.5V. Ideal for general purpose parallel IO port applications in commercial temperature environments.

PIC16F87-I/P

Microchip Technology

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

PIC16F1518T-I/SS

Microchip Technology

The Microchip PIC16F1518T-I/SS is an 8-bit microcontroller with a max clock frequency of 20 MHz. It features 1024 RAM bytes and 128 bytes of data EEPROM, making it suitable for industrial applications requiring low power consumption. With peripherals like BOD, POR, PWM(2), TIMER(3), and WDT, it offers connectivity options such as I2C, SPI, and USART for versatile usage.

LAN9253-I/R4X

Microchip Technology

LAN9253-I/R4X by Microchip Technology is a Serial Communication Controller with 16-bit Address Bus, 12.5 MBps Data Transfer Rate, and 25 MHz Clock Frequency. It is ideal for applications requiring high-speed data communication over I2C or SPI buses in industrial automation and networking systems.

ATTINY44A-SSUR

Microchip Technology

ATTINY44A-SSUR by Microchip: 8-bit RISC microcontroller with 256 bytes of RAM, 256 bytes of EEPROM, and 2048 ROM words. Ideal for industrial applications with SPI connectivity, 2 PWM channels, and low power mode support. Operates at up to 20 MHz with a supply voltage range of 4.5V to 5.5V.

MC9S08AW16MFUE

NXP Semiconductors

MC9S08AW16MFUE by NXP is an 8-bit microcontroller with 40 MHz clock frequency, 1024 bytes RAM, and 16384 ROM words. Ideal for automotive applications due to its temperature grade, it features PWM channels, ADC support, and operates b/w -40°C to 125°C. With a compact size of 14x14mm and low power consumption at supply voltages ranging from 2.7V to 5.5V, this microcontroller is suitable for various embedded systems requiring high performance in a small form factor.

ZL30159GGG2

Microchip Technology

ZL30159GGG2 by Microchip Technology is a clock generator with a max output frequency of 177.5 MHz. It is a surface mount device with 64 terminals and a package size of 9mm x 9mm. This jitter attenuator operates at an industrial temperature range and is commonly used in electronic systems requiring precise timing synchronization.

CA91C142D-33CEV

Renesas Electronics

CA91C142D-33CEV by Renesas Electronics is a bus controller with 64-bit address and external data bus width. It operates at 33 MHz clock frequency, supporting a max data transfer rate of 70 MBps. Ideal for PCI bus compatibility in commercial-grade applications.

ATMEGA6450V-8AU

Microchip Technology

ATMEGA6450V-8AU by Microchip: 8-bit RISC CPU, 32768 ROM words, 2048 EEPROM size. Ideal for industrial applications requiring low power consumption and connectivity via SPI, UART, and USART interfaces.

MPC860TVR80D4

NXP Semiconductors

The NXP Semiconductors MPC860TVR80D4 is a 32-bit microprocessor with integrated cache, operating at a max clock frequency of 50 MHz. It features a low power mode and is suitable for applications requiring high-speed processing in compact devices. With a terminal pitch of 1.27 mm and boundary scan capability, it offers efficient performance in various electronic systems.

S9KEAZ128AMLH

NXP Semiconductors

The NXP Semiconductors S9KEAZ128AMLH is a microcontroller with a max clock frequency of 24 MHz. It has 16-channel 12-bit analog-to-digital converters and offers connectivity options such as CAN, I2C, SPI, and UART. This microcontroller is commonly used in automotive applications due to its temperature grade and low power mode capabilities.

Programmable ICs 485,636

• Field Programmable Gate Arrays (FPGA)

• Programmable Logic Devices (PLD)

LC4128V-75TN100E

Lattice Semiconductor

LC4128V-75TN100E by Lattice Semiconductor is a 3.3V EE PLD with 128 macro cells, 74 inputs, and 64 I/O lines. It has a propagation delay of 7.5ns, operates at up to 111MHz clock frequency, and supports JTAG boundary scan testing. Ideal for applications requiring fast processing speeds and high input/output capabilities in compact electronic designs.

10M16DAF256I7G

Intel

The Intel 10M16DAF256I7G FPGA features 16000 logic cells, 1000 CLBs, and 320 inputs/outputs. Ideal for industrial applications requiring high-performance programmable ICs with a max operating temperature of 100°C. The package style is grid array with a square shape and plastic/epoxy material.

5CEBA4F17C8N

Intel

Intel's 5CEBA4F17C8N FPGA boasts 49000 logic cells, 128 inputs/outputs, and operates at a max supply voltage of 1.13V. Ideal for applications requiring high-speed data processing and complex algorithm implementations in various industries.

EP2C35F484C8N

Intel

EP2C35F484C8N by Intel is a FPGA with 33216 logic cells, 2076 CLBs, and max clock frequency of 402.5 MHz. It is used in applications requiring high-speed processing, such as telecommunications equipment and industrial automation systems.

XC7S15-2CSGA225I

Xilinx

Xilinx XC7S15-2CSGA225I FPGA features 12800 logic cells, 1000 CLBs, and a max clock frequency of 1286 MHz. Ideal for industrial applications requiring high-speed processing in a compact form factor with low power consumption. Suitable for surface mount designs with a package style of grid array and fine pitch terminals.

LCMXO2-7000HC-6BG332I

Lattice Semiconductor

LCMXO2-7000HC-6BG332I by Lattice Semiconductor is a Field Programmable Gate Array (FPGA) with 6864 logic cells. It has a max supply voltage of 3.465V and can operate in temperatures ranging from -40°C to 100°C. This FPGA is commonly used for various applications requiring programmable ICs and high-performance logic capabilities.

AGLN250V2-CSG81I

Microchip Technology

Microchip AGLN250V2-CSG81I is a 6144 CLBs, 250000 gates FPGA with CMOS tech. Operates at 1.14-1.575 V, -40 to 85°C. Ideal for industrial applications requiring high gate count and low power consumption in a compact 0.5mm pitch grid array package.

EPM240T100I5N

Intel

EPM240T100I5N by Intel is a PLD with 192 macro cells, 80 inputs/outputs, and 7.5ns propagation delay. It is used for applications requiring in-system programmability, such as digital signal processing and control systems due to its CMOS technology and JTAG boundary scan test capability.

AGL600V5-FGG144I

Microchip Technology

FIELD PROGRAMMABLE GATE ARRAY; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 144; Package Code: LBGA; Package Shape: SQUARE;

10CX085YU484I6G

Intel

Intel's 10CX085YU484I6G FPGA boasts 85000 logic cells, TSMC technology, and 31000 CLBs. Ideal for industrial applications with -40 to 100 °C operating temp range, it features 188 inputs/outputs and a grid array package style.

EP910DI-35

Altera

UV PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;

ICE40LP8K-CM121

Lattice Semiconductor

ICE40LP8K-CM121 by Lattice Semiconductor is a CMOS FPGA with 7680 logic cells and 960 CLBs. It operates at a max clock frequency of 133 MHz and is suitable for industrial applications.

XC9536XL-7VQG44I

Xilinx

The Xilinx XC9536XL-7VQG44I is a 36 macrocell FLASH PLD with 34 I/O lines, operating at a max clock frequency of 138.88 MHz. Ideal for industrial applications, it features in-system programmability and JTAG boundary scan testing, with a propagation delay of 7.5 ns.

EPM9560ARC240-10

Altera

EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE;

5CEFA9F27I7N

Intel

The Intel 5CEFA9F27I7N is a FPGA with 301,000 logic cells and CLBs. It operates at a max clock frequency of 622 MHz, making it suitable for high-performance applications in various industries such as telecommunications, aerospace, and automotive. With a package style of grid array and dimensions of 27mm x 27mm, this device offers advanced programmable IC technology for versatile design implementations.

A42MX16-PLG84M

Microchip Technology

FIELD PROGRAMMABLE GATE ARRAY; Grading Of Temperature: MILITARY; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;

LCMXO640C-3TN100I

Lattice Semiconductor

LCMXO640C-3TN100I by Lattice Semiconductor is a 640 Logic Cells FPGA with 80 CLBs and 74 Inputs/Outputs. Operating at 1.71V to 3.465V, it's ideal for industrial applications requiring high performance in a compact FLATPACK package with GULL WING terminals.

XCKU060-2FFVA1517I

Xilinx

Xilinx XCKU060-2FFVA1517I FPGA offers 725550 logic cells, 2760 CLBs, and 624 inputs/outputs. Ideal for industrial applications requiring high-performance computing with a wide operating temperature range from -40 to 100°C. Package style is grid array with moisture sensitivity level of 4.

XC7K160T-1FFG676I

Xilinx

The Xilinx XC7K160T-1FFG676I is a FPGA with 162240 logic cells, 12675 CLBs, and max clock frequency of 1098 MHz. It is used in applications requiring high-speed processing such as telecommunications, networking, and industrial automation.

EPM2210GF256C5N

Intel

Intel's EPM2210GF256C5N is a FLASH PLD with 1700 macro cells, 204 inputs/outputs, and 11.2 ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications systems.

RF & Microwave 682,871

• Noise Generators

• Other Function RF & Microwave Devices

• RF & Microwave Amplifiers

• RF/Microwave Antennas

• RF/Microwave Attenuators

• RF/Microwave Couplers

• RF/Microwave DC Blocks

• RF/Microwave Detectors

• RF/Microwave Frequency Multipliers

• RF/Microwave Isolator/Circulators

• RF/Microwave Limiters

• RF/Microwave Mixers

• RF/Microwave Modulator/Demodulators

• RF/Microwave Phase Shifters

• RF/Microwave Splitter/Combiners

• RF/Microwave Switches

• RF/Microwave Terminations

• RF/Microwave Up/Down Converters

LTC5548IUDB#TRMPBF

Analog Devices

DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 2000 MHz; Additional Features: CMOS COMPATIBLE; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 14000 MHz;

C8A50Z4B

Ttm Technologies

C8A50Z4B by Ttm Technologies is an RF/Microwave Termination with a max input power of 39.03 dBm and operating frequency range from 0-6000 MHz. It has a characteristic impedance of 50 ohm, matte tin over nickel terminal finish, and can operate in temperatures ranging from -55 to 125 °C. Ideal for high-power RF applications requiring precise impedance matching.

HMC629ALP4ETR

Analog Devices

HMC629ALP4ETR by Analog Devices is a RF/Microwave Attenuator with 45 dB Nominal Attenuation, 27.99 dBm Max Input Power (CW), and operates from -40 to 85°C. It is a variable attenuator suitable for applications requiring precise signal control in the frequency range of 0-10 GHz.

AVT-51663-TR1G

Broadcom

WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;

MW7IC2725GNR1

NXP Semiconductors

NARROW BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: MOS; Construction: COMPONENT; JESD-609 Code: e3; Maximum Voltage Standing Wave Ratio: 10;

SKY66317-11

Skyworks Solutions

RF/Microwave Amplifiers;

HMC573LC3B

Analog Devices

HMC573LC3B by Analog Devices is a RF/Microwave Frequency Multiplier with a frequency doubling capability. It operates b/w -40°C to 85°C, with a frequency range of 8-22 GHz. The device has a characteristic impedance of 50 ohms and features gold terminal finish, making it suitable for various RF applications.

HMC609LC4TR

Analog Devices

WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Construction: COMPONENT;

SR4L034-L

Antenova

The Antenova SR4L034-L is a linear polarized mobile station antenna with a max operating frequency of 960 MHz. It has a low Max Voltage Standing Wave Ratio (2.8) and can be used in various applications such as 3G, 4G, CDMA, GSM, LTE, and wireless communication systems.

ADRF5027BCCZN

Analog Devices

SPDT;

HMC849ALP4CETR

Analog Devices

HMC849ALP4CETR by Analog Devices is a RF/Microwave switch with a max input power of 33.01 dBm and a max insertion loss of 2.5 dB. It is commonly used as a diversity switch in applications requiring a characteristic impedance of 50 ohm and an operating frequency range from 0 MHz to 6000 MHz.

MD7IC2050NR1

NXP Semiconductors

NARROW BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: FLNG,.67"H.SPACE; JESD-609 Code: e3; Construction: COMPONENT; Maximum Input Power (CW): 28 dBm;

HMC425ALP3E

Analog Devices

HMC425ALP3E by Analog Devices is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 4.3 dB Max Insertion Loss. It operates b/w -40 to 85°C, has a characteristic impedance of 50 ohm, and supports frequencies from 2200 MHz to 8000 MHz. Ideal for variable attenuation in RF/microwave applications with surface mounting feature.

HMC451LP3

Analog Devices

WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Gain: 12.5 dB;

ADG918BRMZ

Analog Devices

The Analog Devices ADG918BRMZ is a CMOS RF/Microwave Diversity Switch with 8 terminals and 50 ohm impedance. It offers a max insertion loss of 1.25 dB, min isolation of 34 dB, and operates from 0 to 4000 MHz. Ideal for applications requiring fast switching times and high power handling up to 17.99 dBm CW.

500-6

Astron Wireless Technology

YAGI ANTENNA;

HMC505LP4ETR

Analog Devices

Analog Devices' HMC505LP4ETR is a RF amplifier with 24 terminals, operating from -40°C to 85°C. It features a narrow band low power design, powered by 3V supply. Ideal for surface mount applications in RF and microwave systems.

HMC129ALC4

Analog Devices

DOUBLE BALANCED; Characteristic Impedance: 50 ohm; Maximum Conversion Loss: 9 dB; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 4000 MHz; Maximum Input Power (CW): 25 dBm;

HMC712LP3CETR

Analog Devices

VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC16,.12SQ,20;

HMC637BPM5E

Analog Devices

Analog Devices' HMC637BPM5E is a GAAS RF amplifier with 12.5 dB gain, operating from 0 to 7500 MHz. It has a max input power of 25 dBm and VSWR of 7, suitable for wideband medium-power applications in RF & microwave systems. With a compact surface-mount construction and operating temperatures from -55°C to 85°C, it offers reliable performance in various environments.

Regulators 1,179,309

LD2981ABU50TR

STMicroelectronics

STMicroelectronics LD2981ABU50TR is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature range from -40°C to 125°C makes it ideal for various electronic devices.

ADP1755ACPZ-R7

Analog Devices

ADP1755ACPZ-R7 by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1.2A and dropout voltage of 0.2V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

ISL80111IRAJZ-T7A

Renesas Electronics

ISL80111IRAJZ-T7A by Renesas Electronics is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 0.09V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline with a very thin profile, ideal for surface mount assembly.

TC1185-3.3VCT713

Microchip Technology

Microchip TC1185-3.3VCT713 is a 3.3V LDO regulator with 0.4A output current, ideal for automotive applications due to its TS16949 screening level and wide operating temperature range (-40 to 125°C). It features a small outline package, low profile design, and excellent line/load regulation of 0.01155%/0.099%.

L7812CV

STMicroelectronics

L7812CV by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 12V and max output current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with a through-hole terminal form, providing ease of installation and reliability in diverse electronic designs.

MIC5365-3.0YC5-TR

Microchip Technology

MIC5365-3.0YC5-TR by Microchip Technology is a CMOS LDO regulator with 3% voltage tolerance, 0.31V dropout voltage, and 0.15A output current. Ideal for applications requiring a fixed positive single output regulator in compact spaces due to its small outline package style and thin profile design.

AP7333-33SRG-7

Diodes Incorporated

AP7333-33SRG-7 by Diodes Inc. is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It features a small outline, low profile package style and operates within an extended temperature range from -40°C to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation.

LTC3025IDC-1#TRMPBF

Analog Devices

LTC3025IDC-1#TRMPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.17V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices needing stable power supply. This surface-mount device comes in a small outline package with a terminal pitch of 0.5mm, offering flexibility and efficiency in circuit design.

KF33BDT-TR

STMicroelectronics

KF33BDT-TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.

LT1185CQ#TRPBF

Analog Devices

LT1185CQ#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 3A and a max dropout voltage of 1V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

LM317LZ

Texas Instruments

LM317LZ by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation. With a max output current of 0.1A and load regulation of 1.5%, it is ideal for electronic devices that require stable power supply.

LT1963AES8#TRPBF

Analog Devices

LT1963AES8#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1.5A and a dropout voltage of 0.55V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.

LT3045EMSE#TRPBF

Analog Devices

LT3045EMSE#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.

LT1086IM#PBF

Analog Devices

LT1086IM#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1.5 A and a max dropout voltage of 1.5 V. It is commonly used in applications requiring stable voltage regulation, such as power supplies for electronic devices.

LTC3025IDC-1#TRPBF

Analog Devices

LTC3025IDC-1#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.17V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

LTC1844ES5-3.3#TRPBF

Analog Devices

LTC1844ES5-3.3#TRPBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 0.15V, suitable for applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers precise performance with a max output current of 0.15A and operating temperature range from 0 to 70°C.

LT3045IDD#TRPBF

Analog Devices

LT3045IDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

NCP163AFCS280T2G

Onsemi

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: VFBGA; Terminal Form: BALL; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;

UA78M05MJGB

Texas Instruments

Other Regulators; No. of Terminals: 8; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 6 %;

ADP124ARHZ-2.9-R7

Analog Devices

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 1.5 %;

Relays 599,304

• DIP & SIP Switches

• Other Function Relays

• Power & Signal Relays

• Radio Frequency Relays

• Reed Relays

• Special Function Relays

• Time Delay Relays

2964500

Phoenix Contact

POWER/SIGNAL RELAY; Mounting Feature: DIN-RAIL MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CUL; DIN EN 50178; EAC; IEC 60664; UL; VDE;

G7L-1A-TUBJ-CB-AC24

Omron

Omron G7L-1A-TUBJ-CB-AC24 is a SPST power/signal relay with 30ms operate/release time, 100000 cycles electrical life, and 30A@220VAC contact rating. It is used in applications requiring momentary relay action, with AC coil voltage of 24V and coil resistance of 303 ohm.

9-1618239-1

TE Connectivity

POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST-NO; Maximum AC Contact Current: 25 A; Termination Type: SOLDER/QUICK CONNECT;

G5LE-14DC12

Omron

Omron G5LE-14DC12 is a SPDT power/signal relay with 10A@250VAC contact rating. Operates at 9V DC, 10ms operate time, and 5ms release time. Ideal for applications requiring momentary relay action in industrial automation and control systems.

S114D-12

Teledyne Technologies

Teledyne's S114D-12 is a DPDT relay with 2 FORM C, operate time of 3.5ms, and electrical life of 100k cycles. Hermetically sealed for reliability, it has a max operating temp of 85°C and can handle AC/DC contact supply types at 0.25A@115VAC. Ideal for power/signal relay applications requiring momentary action in compact spaces.

G6K-2F-RF-TR09DC5

Omron

Omron's G6K-2F-RF-TR09DC5 is a DPDT RF relay with 2 FORM C, operate time of 3ms, and insulation resistance of 1Gohm. Ideal for applications requiring momentary relay action in RF circuits up to 1000MHz.

7-1393243-9

TE Connectivity

TE Connectivity 7-1393243-9 is a DPDT relay with 2 FORM C form factor, operate time of 10ms, and electrical life of 30000 cycles. Ideal for power applications requiring momentary relay action at temperatures ranging from -40°C to 70°C.

G6E-134P-ST-US-DC12

Omron

Omron G6E-134P-ST-US-DC12 is a SPDT power/signal relay with 1 FORM C configuration. It operates at 8ms, has 200000 cycles electrical life, and supports 60W@30VDC. Ideal for applications requiring momentary relay action in various industries.

IM23GR

TE Connectivity

TE Connectivity's IM23GR is a DPDT relay with 2 FORM C, operate time of 3ms, and max contact DC power rating of 60W@220VDC. Ideal for AC/DC applications requiring high insulation resistance (1T ohm) and hermetical sealing. With gold alloy plating, lead ruthenium contacts, UL standard compliance, and compact dimensions (10x6x5.65mm), it ensures reliable performance in various electronic systems.

G2R-24-DC24BYOMI

Omron

Omron G2R-24-DC24BYOMI is a DPDT power/signal relay with 15ms operate time. It has 100000 cycles electrical life, 4A@380VAC max contact AC rating. Ideal for applications requiring momentary relay action in moisture-proof environments.

2-1393243-4

TE Connectivity

TE Connectivity 2-1393243-4 is a DPDT relay with 2 FORM C form factor. It has a max AC contact current of 8A and coil resistance of 350 ohm. Ideal for power & signal applications, it offers dielectric strength up to 1000 Vrms b/w open contacts and operates at temperatures up to 70°C.

HFW5A1201L00

TE Connectivity

TE Connectivity's HFW5A1201L00 RF Relay features DPDT-CO configuration, 6ms operate time, and 100000 cycle electrical life. With a hermetically sealed body and momentary action, it is ideal for applications requiring AC/DC supply types in the frequency range of 100-1000 MHz.

HE721C1210

Littelfuse

HE721C1210 by Littelfuse is a SPDT 1 FORM C reed relay with 3ms operate time. With hermetically sealed body, it has 12V nominal coil voltage and operates at -40 to 85°C. Ideal for applications requiring momentary relay action in DC circuits up to 175V.

1-1393194-9

TE Connectivity

POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;

HE721C0500

Littelfuse

HE721C0500 by Littelfuse is a SPDT reed relay with 3ms operate time, 5W@175VDC power rating, and 10000000000 ohm insulation resistance. Ideal for applications requiring momentary relay action in environments with temperatures ranging from -40 to 85 °C.

A6S-4101-H

Omron

Omron A6S-4101-H DIP & SIP Switch offers 1000 cycles Electrical Life, 100M ohm Insulation Resistance, and SPST Switch Function. Ideal for applications requiring a compact design with 4 switch sections, such as consumer electronics and industrial control systems.

1432871-1

TE Connectivity

POWER/SIGNAL RELAY;

G2R-2DC24

Omron

Omron G2R-2DC24 is a DPDT power/signal relay with 1 FORM C form. It operates at 24V, has 6 terminals, and offers a contact resistance of 50 mohm. With a max AC rating of 5A@250VAC, it's ideal for applications requiring momentary relay action in various industries.

TDA04H0SB1R

ITT Cannon

TDA04H0SB1R by ITT Cannon is a 4-section SPST slide DIP switch with gold flash terminal finish. It has an electrical life of 1000 cycles and operates b/w -20°C to 85°C. Ideal for surface mount applications requiring latched switch action in electronic devices.

1393277-8

TE Connectivity

TE Connectivity 1393277-8 is a SPDT power/signal relay with 5ms operate time and 200000 cycles electrical life. It has a max AC contact current of 25A@12VAC, suitable for applications requiring momentary relay action in temperatures ranging from -40°C to 85°C.

Resistors 497,085,014

• Fixed Resistors

• Fusible Resistors

• Non-linear Resistors

• Other Function Resistors

• Resistor Networks & Arrays

• Variable Resistors

RC0402FR-07150KL

Yageo

Yageo's RC0402FR-07150KL is a fixed resistor with 150000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its SMT package style and operating voltage of 50 V. Operating temperature range from -55 to 155 °C makes it versatile for various electronic devices.

RK73H1ETTP33R0F

Koa Speer Electronics

RK73H1ETTP33R0F by Koa Speer Electronics is a fixed resistor with 33 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V.

RC1206FR-134K64L

Yageo

Yageo's RC1206FR-134K64L is a fixed resistor with 4640 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

RMCF0603FT1K00

Stackpole Electronics

RMCF0603FT1K00 by Stackpole Electronics is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and operating voltage of 75 V.

CRE2512-FZ-R005E-3

Bourns

The Bourns CRE2512-FZ-R005E-3 is a SMT fixed resistor with 0.005 ohm resistance, 1% tolerance, and 3W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and temperature range of -55°C to 170°C. Features wraparound terminals and metal strip technology in a compact 6.4mm x 3.2mm package.

CRCW0402100KFKED

Vishay Intertechnology

Vishay Intertechnology's CRCW0402100KFKED is a fixed resistor with 100000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 50 V.

CRCW08050000Z0EAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW08050000Z0EAHP is a 0805 size fixed resistor with a resistance of 0 ohm. It has a max operating temperature of 155°C and is suitable for surface mount applications. This metal glaze/thick film resistor is commonly used as a jumper in various electronic circuits.

RC0805JR-07470RL

Yageo

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;

T93YB103KT20

Vishay Intertechnology

Vishay Intertechnology's T93YB103KT20 is a 10000 ohm linear trimmer resistor with 21 turns and 10% tolerance. It operates b/w -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The resistor features a CERMET technology, matte tin terminal finish, and can handle up to 0.5 W power dissipation.

RT0603FRE0733KL

Yageo

Yageo's RT0603FRE0733KL is a thin film fixed resistor with 33000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and operating temperatures ranging from -55 to 155 °C.

HVCB2512FKC250K

Stackpole Electronics

HVCB2512FKC250K by Stackpole Electronics is a fixed resistor with 250000 ohm resistance, 1% tolerance, and 2W power dissipation. It operates b/w -55 to 150 °C and has a max voltage of 3000V. Ideal for surface mount applications requiring high precision and reliability in various electronic circuits.

RC1206FR-0722RL

Yageo

Yageo's RC1206FR-0722RL is a 22 ohm fixed resistor with 1% tolerance, suitable for surface mount technology. With a rated power dissipation of 0.25W and operating voltage of 200V, it operates b/w -55°C to 155°C. Ideal for applications requiring precise resistance values in compact electronic devices.

TNPW040210K0BEED

Vishay Intertechnology

Vishay Intertechnology's TNPW040210K0BEED is a 10000 ohm fixed resistor with 0.1% tolerance, suitable for surface mount applications. With a thin film technology and operating voltage of 50V, it offers high precision in a compact 0402 package. Ideal for automotive electronics due to AEC-Q200 compliance and wide temperature range from -55°C to 125°C.

HCJ1206ZT0R00

Stackpole Electronics

HCJ1206ZT0R00 by Stackpole Electronics is a 1206 SMT jumper resistor with 0 ohm resistance, rated for -55 to 155 °C. It features metal plate technology, matte tin over nickel finish, and AEC-Q200 compliance. Ideal for automotive electronics and high-temperature applications.

RC1206JR-07240RL

Yageo

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 240 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;

RC0805FR-132KL

Yageo

Yageo's RC0805FR-132KL is a fixed resistor with 2000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

CPF0402B2K74E1

TE Connectivity

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2740 ohm; Rated Power Dissipation (P): .063 W; Maximum Operating Temperature: 155 Cel; Tolerance: .1 %;

RC1218JK-0722RL

Yageo

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 22 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;

WSR31L000FEA

Vishay Intertechnology

Vishay Intertechnology's WSR31L000FEA is a fixed resistor with 0.001 ohm resistance, 1% tolerance, and 3W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating temperature range of -65°C to 275°C.

RC0603FR-0747KL

Yageo

Yageo's RC0603FR-0747KL is a 47000 ohm, 1% tolerance fixed resistor with a max operating temperature of 155°C. This SMT resistor, with METAL GLAZE/THICK FILM technology and WRAPAROUND terminals, is ideal for applications requiring precise resistance values in compact electronic devices.

Sensors & Transducers 45,888,464

• Image Sensors

• Infrared Sensors

• Linear Position Sensors

• Magnetic Field Sensors

• Other Function Sensors & Transducers

• Pressure Sensors

• Proximity Sensors

• Reflective Object Sensors

• Rotary Position Sensors

• Temperature Sensors

A1326LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1326LLHLX-T is a magnetic field sensor with 5.5V max supply voltage, 1.5% linearity, and 2500 mV/G sensitivity. Ideal for applications requiring precise analog voltage output in temperature range of -40 to 150°C.

AR0135AT2M00XUEA0-TPBR

Onsemi

IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: SQUARE; Output Range: 0.40-2.5V; Termination Type: SOLDER;

OMH3075S

Tt Electronics Plc

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 21mA;

AH1806-W-7

Diodes Incorporated

AH1806-W-7 by Diodes Inc. is a magnetic field sensor with 5.5V max supply voltage, 1mT hysteresis, and 0.30V output range. Ideal for applications requiring Hall effect sensors in a compact rectangular package for surface mount installations at temperatures ranging from -40 to 85°C.

AWM3100V

Honeywell Sensing And Control

MASS AIR FLOW SENSOR;

NOIP1SN025KA-GTI

Onsemi

IMAGE SENSOR,CMOS; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Vertical Pixel: 5120; Maximum Operating Temperature: 85 Cel; Master Clock: 360 MHz;

MCP9700T-H/LT

Microchip Technology

MCP9700T-H/LT by Microchip is a temperature sensor with 12-bit resolution, operating from -40 to 150°C. It has a supply voltage range of 2.3-5.5V and accuracy of ±6°C. Ideal for automotive applications due to TS16949 screening, surface mounting feature, and resistance-based analog output.

LA205-S

Lem International Sa

LA205-S by Lem International Sa is a current sensor with 0.8% accuracy, 11.4-15.75V supply voltage range, and -10 to 85°C operating temperature. It features plastic housing and panel mount for easy installation in various applications requiring precise current output measurements.

ACS714LLCTR-05B-T

Allegro MicroSystems

ACS714LLCTR-05B-T by Allegro MicroSystems is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and analog output voltage. It has a compact rectangular shape ideal for surface mount applications in temperature ranges from -40°C to 150°C.

MAX6615AEE+T

Analog Devices

MAX6615AEE+T by Analog Devices is an 8-bit temperature sensor with a supply voltage range of 3-5.5V. It operates b/w -40 to 125°C, featuring a 2-wire interface and digital output. Ideal for applications requiring precise temperature monitoring in compact spaces.

LA25-NP

Lem International Sa

LA25-NP by Lem International Sa is a CURRENT SENSOR with 0.5% accuracy, 15.75V max supply voltage, and -40 to 85°C operating temp range. It has a rectangular shape, plastic housing, and through-hole mounting feature. Ideal for precise current measurement in various electronic applications.

LM335AZ

Texas Instruments

LM335AZ by Texas Instruments is a temperature sensor with voltage output. It operates b/w -40 to 100°C, providing an output voltage range of 2.95V to 3.01V with a linearity of ±1.50°C. This sensor is commonly used in applications requiring precise temperature monitoring and control due to its high accuracy and small form factor.

PX3AG1BH025BSAAX

Honeywell Sensing And Control

PX3AG1BH025BSAAX by Honeywell is a pressure sensor with 0.25% accuracy, 5.25V max supply voltage, and G1/4A-G port type. Ideal for applications requiring sealed gage pressure sensing in environments ranging from -40 to 125°C, with a response time of 2000 us and voltage output range of 0.5-4.5V.

MS561101BA03-50

TE Connectivity

TE Connectivity's MS561101BA03-50 is a 24-bit pressure sensor with 1.5% accuracy, operating at -40 to 85°C. It features a digital voltage output via I2C interface, suitable for applications requiring precise pressure measurement in the range of 0.145 to 17.404 Psi.

RR122-1E73-511

Coto Technology

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE;

E2E-X10D1-M1GJ

Omron

PROXIMITY SENSOR,INDUCTIVE;

DS18B20-SL+T&R

Analog Devices

DS18B20-SL+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Ideal for applications requiring digital output and serial communication in a compact rectangular package.

103SR13A-12

Honeywell Sensing And Control

ROTARY POSITION SENSOR,HALL EFFECT;

A1214LUA-T

Allegro MicroSystems

A1214LUA-T by Allegro MicroSystems is a magnetic field sensor with 24V supply, 44mT hysteresis, and 400mV analog voltage output. Ideal for applications requiring precise non-inverting magnetic field detection in temperatures ranging from -40 to 150°C.

DS18B20U+T&R

Analog Devices

Analog Devices' DS18B20U+T&R is a 12-bit temperature sensor with 1-Wire interface, operating from -55 to 125°C. It has a max accuracy of ±0.50°C and operates on supply voltages of 3-5.5V. Ideal for applications requiring precise digital temperature sensing in compact spaces like IoT devices and industrial equipment.

Storage Drives 94,221

• Flash Drives

• Floppy/Zip Drives

• Hard Drives/Solid State Drives

• Magneto Optical Drives

• REV Drives

Storage Media 3,220

• Floppy/Zip Media

• Magneto Optical Media

• REV Media

• Tape Media

• UDO Media

Storage Systems 44

• Optical Disc Servers

Switches 11,435,345

• Keylock Switches

• Keypad Switches

• Magnetic Reed Switches

• Other Function Switches

• Pushbutton Switches

• Rocker Switches

• Rotary Switches

• Slide Switches

• Snap Action & Limit Switches

• Special Function Switches

• Thumb & Pushwheel Switches

• Toggle Switches

SKRPADE010

Alps Alpine

Alps Alpine SKRPADE010 Keypad Switch offers SPST switch function, 100000 cycles electrical life, and 100000000 ohm insulation resistance. Ideal for applications requiring ON-OFF contact function with a max operating force of 4N.

45574

Grayhill

The Grayhill 10-09 pushbutton switch features a black actuator with beryllium copper terminals, offering an electrical life of 100k cycles. With a sealing of epoxy terminal and SPST switch function, it is ideal for applications requiring momentary contact such as control panels or industrial machinery. Operating temperature ranges from -40 to 85°C, making it suitable for various environments.

SS-5GL2

Omron

Omron SS-5GL2 is a SPDT snap acting/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and operates b/w -25 to 85 °C. With HINGE ROLLER LEVER actuator, it is ideal for panel mounting applications requiring momentary switch action.

1TL1-3

Honeywell Sensing And Control

1TL1-3 toggle switch by Honeywell Sensing And Control is a dust-proof SPDT switch with a lever actuator. It has a max AC contact current of 15A@125VAC and a max DC contact current of 20A@28VDC. This switch is suitable for panel mount-threaded applications requiring reliable and durable switching capabilities.

SKQGADE010

Alps Alpine

Alps Alpine SKQGADE010 is a SPST keypad switch with 100000 cycles electrical life and 100M ohm insulation resistance. It operates b/w -40 to 90°C, suitable for applications requiring a momentary-tactile switch action in surface mount configurations.

Y101132C203NQ

C & K Components

Y101132C203NQ by C & K Components is a Keylock Switch with GLASS FILLED POLYESTER housing and COPPER terminals. It has an Electrical Life of 10000 cycles, SILVER end contact plating, and 4A max AC/DC contact current. Ideal for PANEL MOUNT applications requiring reliable switching with 125VAC/28VDC ratings.

2-1825011-4

TE Connectivity

TE Connectivity 2-1825011-4 is a 4PDT slide switch with 15000 cycles electrical life. It has a body width of 7.35in and actuator travel of 2.794mm, suitable for panel mounting applications. With gold plating on center contacts, it can handle 0.4A AC/DC current at max 20V rating efficiently.

S101091SS03Q

C & K Components

S101091SS03Q slide switch by C & K Components features a SPST switch function with 2 positions. It has a max AC contact current of 6A@250VAC and a DC contact current of 1A@125VDC. This black slide switch, made of nylon housing material with copper terminals, is ideal for panel mount applications requiring latched switch action.

1.14.100.503/0000

C & K Components

1.14.100.503/0000 by C & K Components is a SPST Keypad Switch with 1000000 cycles Electrical Life and 1000000000 ohm Insulation Resistance. It operates b/w -40 to 80 °C, has a max DC Contact Voltage of 42V, and uses Matte Tin (Sn) for Terminal Finish. Ideal for applications requiring a reliable keypad switch with high insulation resistance and long electrical life.

V-156-1C5

Omron

SNAP ACTING/LIMIT SWITCH;

Z-15GD-B

Omron

Omron Z-15GD-B snap action switch has 500000 cycles electrical life, SPDT switch function, and 15A@250VAC AC max rating. With a short spring plunger actuator type, it is ideal for panel mounting applications requiring momentary switch action.

KSR223GLFG

ITT Cannon

KSR223GLFG by ITT Cannon is a SPST keypad switch with 200000 cycles electrical life, IP50 sealing, and 3.8" body width. Ideal for applications requiring a soft type actuator, it operates b/w -40°C to 125°C temperatures and has a max contact voltage of 32VDC.

V7-1B17D8-263

Honeywell Sensing And Control

V7-1B17D8-263 by Honeywell is a snap acting/limit switch with SPDT function. It features a steel lever actuator, corrosion-proof sealing, and gold terminal finish. Ideal for panel mounting applications, it has a max AC contact current of 11A@277VAC and operates in temperatures ranging from -40 to 82°C.

MS24525-26

Defense Logistics Agency

MS24525-26 by Defense Logistics Agency is a 4PDT toggle switch with environmentally sealed body. It has max AC contact current of 11A@115VAC and DC contact current of 18A@28VDC. Ideal for panel mount applications, it features toggle lever actuator and screw termination type.

KSR231GLFS

ITT Cannon

KSR231GLFS by ITT Cannon is a SPST keypad switch with 200000 cycles electrical life. Featuring IP50 sealing, it has a body width of 3.8" and operates b/w -40°C to 85°C. Ideal for applications requiring a soft type actuator, such as consumer electronics or industrial control systems.

DB2CA1RC

The Cherry

The Cherry's DB2CA1RC is a SPDT snap action/limit switch with 6000 cycles electrical life. Featuring a roller lever actuator, it has a max operating temperature of 120°C and can handle up to 10.1A@250VAC AC load. Ideal for panel mounting applications requiring precise momentary switch action.

35-524-231-S-900

TE Connectivity

ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Type (Actuator): LEVER; Termination Type: SOLDER; No. of Switch Sections: 1; Minimum Operating Temperature: -40 Cel;

170

Carling Technologies

The Carling Technologies 170 Pushbutton Switch has an electrical life of 25,000 cycles and insulation resistance of 100MΩ. With SPST switch function and max AC contact current of 15A@125VAC, it is ideal for applications requiring momentary ON-(OFF) contact function. The switch features a plunger actuator type, nickel finish, and brass material for durability in panel mount-threaded installations.

MS24525-23

Defense Logistics Agency

MS24525-23 by Defense Logistics Agency is a 4PDT toggle switch with environmentally sealed body. It has max AC contact current of 15A@115VAC and DC contact current of 20A@28VDC. Ideal for panel mount applications, it features a toggle lever actuator and latched switch action.

5GTH93582

Apem Components

The Apem Components 5GTH93582 keypad switch features a POLYPHENYLENE SULPHIDE housing, COPPER TIN ALLOY terminals, and RED LED illumination. With an IP67 sealing rating, it is ideal for applications requiring a SPST switch function in environments with temperatures ranging from -30 to 85 °C. The switch offers a max DC contact voltage of 24V and an electrical life of 10M cycles.

Telecommunications 3,506,672

• ATM/SONET/SDH Circuits

• Analog Data Transmission Interfaces

• Audio Codecs

• Cellphone ICs

• Cordless Phone ICs

• Digital Transmission Controllers

• Digital Transmission Interfaces

• Digital Transmission Support

• Modems

• Network Interfaces

• Other Function Telecom Interface ICs

• Paging ICs

• Telecom - Encryption ICs

• Telecom - Protection ICs

• Telecom - Signaling ICs

• Telecom - Switching ICs

• Telephone Line ICs

BGSA12GN10E6327XTSA1

Infineon Technologies

Infineon BGSA12GN10E6327XTSA1 is a 10-terminal telecom IC with nominal voltage of 2.85V. It operates b/w -30°C to 85°C, in a rectangular chip carrier package style. Suitable for telecom circuits, it has surface mount capability and terminal pitch of 0.4mm.

PN5120A0HN/C2,551

NXP Semiconductors

Other Telecom ICs; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: QCCN; Package Shape: SQUARE;

HMC830LP6GETR

Analog Devices

RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;

KSZ9021GN-TR

Microchip Technology

Microchip Technology's KSZ9021GN-TR is a Network Interface with 64 terminals, operating at 0-70°C. It features Ethernet transceiver type, 1000 Mbps data rate, and 1.2V supply voltage. Ideal for commercial telecom applications due to its compact square chip carrier package style.

MWCT1013VLH

NXP Semiconductors

TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;

LTC2875IS8#TRPBF

Analog Devices

LTC2875IS8#TRPBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating from -40 to 85°C. It has a small outline package style, matte tin finish, and nominal voltage of 3.3V. Ideal for network interfaces in industrial telecom applications.

KSZ8995MA

Microchip Technology

Microchip Technology's KSZ8995MA is an Ethernet switch IC with 128 terminals in a rectangular flatpack package. Operating temperature range of 0-70°C, supply voltage of 1.8V, and max current draw of 230mA make it ideal for telecom applications. Package material is plastic/epoxy with matte tin finish and gull wing terminal form.

MAX3748HETE+T

Analog Devices

MAX3748HETE+T by Analog Devices is an ATM/SONET/SDH circuit in a square chip carrier package. It operates at 3.3V with 16 terminals and industrial temperature grade. With a max supply current of 49mA, it is ideal for high-speed communication applications requiring reliable performance in harsh environments.

SL3S1013FTB0,115

NXP Semiconductors

NXP Semiconductors SL3S1013FTB0,115 is a telecom IC with CMOS technology. It features 6 terminals in a small outline package with very thin profile. Operating temperature range from -40 to 85 °C, suitable for industrial applications like telecom circuits.

090-02789-002

Microchip Technology

Microchip Technology's 090-02789-002 is a RECTANGULAR package MICROELECTRONIC ASSEMBLY with 9 PIN/PEG terminals. Operating temperature range from -40 to 80 °C, suitable for TELECOM CIRCUIT applications at 3.3 V supply voltage.

SN65HVD1050D

Texas Instruments

SN65HVD1050D by Texas Instruments is a network interface IC with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and is designed for automotive applications. With a temperature range from -40 to 125°C, it features gull wing terminals and small outline packaging.

NEO-M8U-06B

U-blox Ag

NEO-M8U-06B by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and MSL level of 4, suitable for industrial applications requiring precise positioning and timing. The compact rectangular package measures 12.2mm x 16mm with a low seated height of 2.6mm, making it ideal for surface mount designs in automotive or IoT devices.

NRF51822-QFAA-R

Nordic Semiconductor Asa

NRF51822-QFAA-R by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, -25 to 75°C operating temperature range, and 0.4mm terminal pitch. It is used in telecom circuits due to its square chip carrier package style and very thin profile, suitable for surface mount applications.

KSZ8041NLI-TR

Microchip Technology

KSZ8041NLI-TR by Microchip is a 32-terminal Ethernet transceiver with 100 Mbps data rate. Operating temperature range from -40 to 85°C, suitable for industrial applications. Surface mountable chip carrier package with matte tin finish and 3.3V supply voltage.

SX1509BIULTRT

Semtech

Semtech's SX1509BIULTRT is a telecom IC with 1 function, operating at -40 to 85°C. It has 28 terminals in a square chip carrier package, ideal for industrial applications requiring a 3.3V supply voltage and very thin profile design.

BGM220SC22HNA2

Silicon Labs

TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;

ST25R3911B-AQFT

STMicroelectronics

RF AND BASEBAND CIRCUIT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;

VSC7546TSN-V/5CC

Microchip Technology

Microchip Technology's VSC7546TSN-V/5CC is an Ethernet switch IC with 888 terminals in a square grid array package. Operating temperature ranges from -40 to 110°C, making it suitable for telecom applications. With a nominal voltage of 0.9V and terminal pitch of 0.8mm, it offers high performance in a compact form factor.

CPC5622ATR

Littelfuse

MODEM-DATA/FAX/VOICE; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;

LE9643AQCT

Microchip Technology

SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HQCCN; Package Shape: RECTANGULAR;

Terminals & Terminal Blocks 1,825,695

• Terminals & Terminal Blocks

67581-0011

Molex

WIRE TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE;

1720547

Phoenix Contact

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: PA, UL 94V0; Wire Gauge: 9 AWG; Voltage (Rated): 500 V;

1703141

Phoenix Contact

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SCREW; Additional Features: STANDARD: UL 94V-0, PA; Wire Gauge: 12 AWG; Voltage (Rated): 320 V;

2059-301/998-403

Wago