Line Drivers & Receivers

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SP505	Sipex			GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS						5 V		5		FLATPACK	QFP80,.7SQ		Line Driver or Receivers			.635 mm					7	TIN LEAD	QUAD	S-PQFP-G80	3			Not Qualified	3.2 Amp				YES	e0		225			500 ns
MAX249CQH-D	Maxim Integrated		COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS				30 mA		5 V		5		CHIP CARRIER	LDCC44,.7SQ		Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel			0 Cel	6	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX232MWE/PR-T	Maxim Integrated		MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS				10 mA		5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers			1.27 mm	125 Cel			-55 Cel	2		DUAL	R-PDSO-G16				Not Qualified	3.2 Amp				NO					10 V	1000 ns
MAX3280EAUK	Maxim Integrated		AUTOMOTIVE	GULL WING	5	TSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS				15 mA				3.3/5		SMALL OUTLINE, THIN PROFILE	TSOP5/6,.11,37		Line Driver or Receivers			.95 mm	125 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G5	1			Not Qualified	4 Amp					e0	20	240			15 ns
THC63LVD1027	Thine Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10				GENERAL PURPOSE	340 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20		Line Driver or Receivers		3 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	10	TIN BISMUTH	DUAL	R-PDSO-G24	3	1.1 mm	6.1 mm	Not Qualified		COMPLEMENTARY	10		YES	e6	10	260	17 mm	.1 V
ISL3153EIBZ-T7A	Intersil		INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS				.8 mA		5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	3			Not Qualified	8 Amp				YES	e3	30	260		2.4 V	1300 ns
THC63LVD827	Thine Electronics	LINE DRIVER	INDUSTRIAL	BALL	72	TFBGA	SQUARE	PLASTIC/EPOXY	YES	1.98 V	8	CMOS			GENERAL PURPOSE	88 mA	STANDARD	1.8 V				GRID ARRAY, THIN PROFILE, FINE PITCH	BGA72,9X9,25			.00001 Amp	1.62 V	.65 mm	85 Cel		DIFFERENTIAL	-40 Cel	8		BOTTOM	S-PBGA-B72		1.2 mm	7 mm			COMPLEMENTARY			YES				7 mm	.14 V
TLK10002CTR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	144	BGA	SQUARE	PLASTIC/EPOXY	YES		1	CMOS			GENERAL PURPOSE	540 mA	DIFFERENTIAL		1.05 V			GRID ARRAY		.95 V		.00017 Amp		1 mm	85 Cel	1 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B144	4	3.25 mm	13 mm	Not Qualified		TRUE	1		YES	e1	30	260	13 mm		0 ns
TUSB1310ZAY	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	175	LFBGA	SQUARE	PLASTIC/EPOXY	YES		1								1.89 V	1.1,1.8,3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA175,14X14,32	1.71 V	Line Driver or Receivers			.8 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B175	3			Not Qualified	2 Amp	TRUE			YES	e1	30	260		.8 V	0 ns
ISO15MDWR	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	125 Cel	3.3 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
ISO35MDW	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	125 Cel	3.3 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
ISO35TDW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			340 ns	EIA-485; EIA-422	16 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	10.3 mm	1.5 V	115 ns
NCV7420D24G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	26 V	1				GENERAL PURPOSE		STANDARD	7.3 V				SMALL OUTLINE					5 V	1.27 mm	125 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G14	2	1.72 mm	3.93 mm	Not Qualified			1		NO	e3	30	260	8.68 mm
NCV7420D26G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	26 V	1				GENERAL PURPOSE		STANDARD	7.3 V				SMALL OUTLINE					6 V	1.27 mm	125 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G14	2	1.72 mm	3.93 mm	Not Qualified			1		NO	e3	30	260	8.68 mm
HI-4851PSTF	Holt Integrated Circuits	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			205 ns	EIA-422-B; TIA-422-B; EIA-485; TIA-485; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	125 Cel			-55 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.7733 mm	3.9 mm	Not Qualified			1		YES	e3		260	4.92 mm		32 ns
SN65HVD21AD	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			60 ns	EIA-485-A; TIA-485-A	12 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	30	260	4.9 mm	1.8 V	50 ns
ADM3075EWYRZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1			800 ns	EIA-422; EIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	200 ns
AD8141ACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
AD8141ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
AD8141ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	1	.8 mm	4 mm	Not Qualified					YES	e3			4 mm		0 ns
AD8142ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
AD8142ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
MAX3232CSE-TG05	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232; TIA-232		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm				2		NO	e0			9.9 mm
ADN4696EBRZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	DMOS		2.4 ns	EIA-899; TIA-899; EIA-644; TIA-644	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3			4.9 mm	.48 V	6 ns
SN65HVD09IDGGREP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			13.5 ns	EIA-422; EIA-485	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.5 mm	85 Cel	5 V	3-STATE	-40 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm		8 Amp	TRUE	9		YES	e4	30	260	14 mm	4 V	14.5 ns
NB3N201SDG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1			2.4 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3	NOT SPECIFIED	NOT SPECIFIED	4.9 mm	.05 V	6 ns
MAX232ECDWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	0 ns
AM26C32CNS	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS				15 mA		5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1			Not Qualified	6 Amp					e4	30	260			0 ns
NTS0102GD,125	NXP Semiconductors	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			8.8 ns	GENERAL PURPOSE		STANDARD	1.8 V	5.5 V	1.8/3.3,2.5/5		SMALL OUTLINE, VERY THIN PROFILE		2.3 V	Other Interface ICs		1.65 V	.5 mm	125 Cel	2.5 V		-40 Cel	2	MATTE TIN	DUAL	R-PDSO-N8	1	.5 mm	2 mm	Not Qualified			2		NO	e3	30	260	3 mm		8.8 ns
SN65HVD78D	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			15 ns	EIA-422; EIA-485	.95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	125 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	35 ns
ADN4690EBRZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			DMOS				24 mA		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1			Not Qualified	8 Amp				YES	e3	30	260		.48 V	0 ns
ADN4692EBRZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			DMOS				24 mA		3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1			Not Qualified	8 Amp				YES	e3	30	260		.48 V	0 ns
ADN4694EBRZ-RL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			DMOS				24 mA		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1			Not Qualified	8 Amp				YES	e3	30	260		.48 V	0 ns
ADN4694EBRZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			DMOS				24 mA		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1			Not Qualified	8 Amp				YES	e3	30	260		.48 V	0 ns
ADN4695EBRZ-RL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			DMOS				24 mA		3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1			Not Qualified	8 Amp				YES	e3	30	260		.48 V	0 ns
AD8122ACPZ-R7	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			BIPOLAR						5 V		+-5	-5 V	CHIP CARRIER	LCC40,.24SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQCC-N40	3			Not Qualified						e3	30	260			0 ns
AD8122ACPZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			BIPOLAR						5 V		+-5	-5 V	CHIP CARRIER	LCC40,.24SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQCC-N40	3			Not Qualified						e3	30	260			0 ns
MAX3232CDWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			300 ns	EIA-232-F	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	.001 Amp	INVERTED	2	CAN ALSO OPERATE AT 5 V	NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	300 ns
BU7988KVT	ROHM	LINE DRIVER	OTHER	GULL WING	100	QFP	SQUARE	PLASTIC/EPOXY	YES									3.3 V		3.3		FLATPACK	TQFP100,.63SQ		Line Driver or Receivers			.5 mm	85 Cel			-20 Cel		TIN COPPER	QUAD	S-PQFP-G100				Not Qualified						e2		260			0 ns
DS90C185SQE/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		5			93.96 ns		85 mA		1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	1.71 V	Line Driver or Receivers			.4 mm	70 Cel	1.8 V	DIFFERENTIAL	-10 Cel		MATTE TIN	QUAD	S-PQCC-N48	1	.8 mm	6 mm	Not Qualified		COMPLEMENTARY	5		YES	e3	30	260	6 mm		0 ns
SN65HVD11SHKQ	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	1			40 ns	EIA-485-A; TIA-485-A; ISO 8482	18 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.45	3 V	Line Driver or Receivers	.000003 Amp	3 V	1.27 mm	210 Cel			-55 Cel	1	GOLD	DUAL	R-CDSO-G8		2.8 mm	5.65 mm	Not Qualified	8 Amp		1		YES	e4			6.9 mm	1 V	70 ns
ADN4667WARZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS	AEC-Q100	1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm						YES	e3	30	260	9.9 mm
ADN4691EBRZ-RL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	DMOS		2.4 ns	EIA-899; TIA-899; EIA-644; TIA-644	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3	30	260	4.9 mm	.48 V	6 ns
ADN4691EBRZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	DMOS		2.4 ns	EIA-899; TIA-899; EIA-644; TIA-644	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3	30	260	4.9 mm	.48 V	6 ns
ADN4693EBRZ-RL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	DMOS		2.4 ns	EIA-899; TIA-899; EIA-644; TIA-644	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3	30	260	8.65 mm	.48 V	6 ns
DS92LV2421SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1				I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
DS92LV2421SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1				I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
DS92LV2421SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1				I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.