Line Drivers & Receivers

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS92LV2422SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	11.5 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N60	3	.8 mm	9 mm	Not Qualified		TRUE	24		NO	e3	30	260	9 mm		0 ns
DS92LV2422SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	11.5 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N60	3	.8 mm	9 mm	Not Qualified			24		NO	e3	30	260	9 mm		0 ns
DS92LV2422SQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	11.5 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N60	3	.8 mm	9 mm	Not Qualified		TRUE	24		NO	e3	30	260	9 mm		0 ns
DS90C187LF/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE	PLASTIC/EPOXY	YES		5						150 mA		1.8 V	1.89 V	1.8	GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm	7 mm	Not Qualified			5		YES	e4	30	260	7 mm		0 ns
DS90C187LFE/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE	PLASTIC/EPOXY	YES		5						150 mA		1.8 V	1.89 V	1.8	GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm	7 mm	Not Qualified			5		YES	e4	30	260	7 mm		0 ns
DS90C187LFX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE	PLASTIC/EPOXY	YES		5						150 mA		1.8 V	1.89 V	1.8	GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm	7 mm	Not Qualified			5		YES	e4	30	260	7 mm		0 ns
DS32EL0421SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2					EIA-644; TIA-644	152 mA	DIFFERENTIAL	3.3 V	2.625 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	2.375 V	Line Driver or Receivers		3.135 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
DS32ELX0421SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2					EIA-644; TIA-644	152 mA	DIFFERENTIAL	3.3 V		2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Line Driver or Receivers		3.135 V	.5 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
NCV7381DP0G	Onsemi	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	50 V	1			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER		5.25 V		SMALL OUTLINE, SHRINK PITCH		4.75 V			5.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	TIN	DUAL	R-PDSO-G16	2	1.99 mm	5.3 mm				1		YES	e3	30	260	6.2 mm
NCV7381DP0R2G	Onsemi	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	50 V	1			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER		5.25 V		SMALL OUTLINE, SHRINK PITCH		4.75 V			5.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	2	1.99 mm	5.3 mm				1		YES	e3	30	260	6.2 mm
SN65HVD78DGK	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				15 ns	EIA-422; EIA-485	.95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	125 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp		1		YES	e4	NOT SPECIFIED	260	3 mm	1.5 V	35 ns
DS125BR800SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES		4	8								2.625 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	R-PQCC-N54	2	.8 mm	5.5 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	10 mm	2 V	0 ns
DS125BR800SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES		4	8								2.625 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V		-40 Cel		MATTE TIN	QUAD	R-PQCC-N54	2	.8 mm	5.5 mm	Not Qualified			4		YES	e3	30	260	10 mm	2 V	0 ns
DS90UB301QSQ/NOPB	Texas Instruments	LINE DRIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
DS90UB301QSQE/NOPB	Texas Instruments	LINE DRIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
DS90UB302QSQ/NOPB	Texas Instruments	LINE RECEIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
DS90UH301QSQ/NOPB	Texas Instruments	LINE DRIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
DS90UH301QSQE/NOPB	Texas Instruments	LINE DRIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
DS90UH301QSQX/NOPB	Texas Instruments	LINE DRIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
DS90UH302QSQ/NOPB	Texas Instruments	LINE RECEIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
DS90UH302QSQE/NOPB	Texas Instruments	LINE RECEIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
DS90UH302QSQX/NOPB	Texas Instruments	LINE RECEIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
NCN5150DR2G	Onsemi	LINE TRANSCEIVER						PLASTIC/EPOXY											3.3 V			SMALL OUTLINE															2														0 ns
DS90C124IVS/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		GENERAL PURPOSE	75 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS90C124IVSX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		GENERAL PURPOSE	75 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS90C124QVS/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE	85 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS90C124QVSX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE	85 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS90C241IVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
DS90C241QVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
DS90C241QVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
SN65HVD82D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				1000 ns		.9 mA		5 V	5.5 V	5	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers			1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.91 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	195 ns
ADA4312-1ACPZ-R2	Analog Devices	LINE DRIVER																																MATTE TIN			3									e3	30	260			0 ns
ADA4312-1ACPZ-RL	Analog Devices	LINE DRIVER																																MATTE TIN			3									e3	30	260			0 ns
HI-8597PSTF	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	16	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					ARINC 429		STANDARD	3.3 V		3.3	SMALL OUTLINE, HEAT SINK/SLUG	SOP16,.4		Line Driver or Receivers	.0000001 Amp	3 V	1.27 mm	125 Cel		3-STATE	-55 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G16	1		7.5 mm	Not Qualified					YES	e3	40	260	10.3 mm	9 V	0 ns
DS32EL0124SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					EIA-644; TIA-644		DIFFERENTIAL	2.5 V	3.465 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3.135 V	Line Driver or Receivers		2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified	.01 Amp		2		YES	e3	30	260	7 mm		0 ns
DS32ELX0124SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					EIA-644; TIA-644		DIFFERENTIAL	2.5 V	3.465 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3.135 V	Line Driver or Receivers		2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified			2		YES	e3	30	260	7 mm		0 ns
DS32ELX0124SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					EIA-644; TIA-644	127 mA	DIFFERENTIAL	2.5 V	3.465 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3.135 V	Line Driver or Receivers		2.375 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	2		YES	e3	30	260	7 mm		0 ns
DS32ELX0124SQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					EIA-644; TIA-644	127 mA	DIFFERENTIAL	2.5 V	3.465 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3.135 V	Line Driver or Receivers		2.375 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	2		YES	e3	30	260	7 mm		0 ns
DS90UH927QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified					NO	e3	30	260	6 mm		0 ns
DS90UH927QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified					NO	e3	30	260	6 mm		0 ns
DS90UH927QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified					NO	e3	30	260	6 mm		0 ns
ADA4930-1SCPZ-EPR7	Analog Devices	LINE DRIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260			0 ns
ADA4930-1SCPZ-EPRL	Analog Devices	LINE DRIVER																																NICKEL PALLADIUM GOLD			3									e4		260			0 ns
ADM3491ARU-1REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		70 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16		1.2 mm	4.4 mm				1		YES	e0			5 mm		115 ns
LMH0002SQ/S250	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers		3.135 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	1	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm	.75 V	0 ns
IL3585-3E	Nve	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				38 ns	EIA-485; ISO 8482E		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE		4.5 V			3 V	1.27 mm	85 Cel	5 V		-40 Cel	1		DUAL	R-PDSO-G16		1.8 mm	3.9 mm				1	ALSO HAS SUPPLY VOLTAGE OF 4.5 TO 5.V	YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		38 ns
DS26LS31N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		15 ns	EIA-422; FED STD 1020		STANDARD	5 V		5	IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified					YES	e0			19.05 mm	2 V	0 ns
DS90CR286AQMT/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			AEC-Q100		EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4			e3	30	260	14 mm		0 ns

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.