Line Drivers & Receivers

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADV7623BSTZ-P-RL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	3		CMOS			GENERAL PURPOSE	545 mA	DIFFERENTIAL	1.8 V	3.46 V			FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	3.14 V		.00006 Amp	1.71 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	3	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G144	3	1.6 mm	20 mm			COMPLEMENTARY	12		YES	e3	30	260	20 mm	2 V
ADV7623BSTZ-P	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	3		CMOS			GENERAL PURPOSE	545 mA	DIFFERENTIAL	1.8 V	3.46 V			FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	3.14 V		.00006 Amp	1.71 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	3	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G144	3	1.6 mm	20 mm			COMPLEMENTARY	12		YES	e3	30	260	20 mm	2 V
DS90CF384AQMT/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4			AEC-Q100			105 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		NO	e3	30	260	14 mm		0 ns
DS90CF384AQMTX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS	AEC-Q100			105 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		NO	e3	30	260	14 mm		0 ns
DS125RT410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
DS125RT410SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
DS90UB928QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm		0 ns
DS90UH928QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm		0 ns
DS90UH928QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm		0 ns
DS90UH928QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm		0 ns
TLE6285GDUMA1	Infineon Technologies	LINE TRANSCEIVER		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BCDMOS		3000 ns	ISO 9141		SCHMITT TRIGGER	5 V	35 V			SMALL OUTLINE		6 V			4.5 V	1.27 mm					1		DUAL	R-PDSO-G16		1.75 mm	4 mm	Not Qualified			1		NO				10 mm		6000 ns
TLE7269GXUMA1	Infineon Technologies	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	27 V	1		BCDMOS		6000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	13.5 V				SMALL OUTLINE					7 V	1.27 mm	125 Cel			-40 Cel	2	NICKEL GOLD PALLADIUM	DUAL	R-PDSO-G14	3	1.75 mm	4 mm	Not Qualified			2		NO				8.75 mm		6000 ns
DS110DF410SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
DS110RT410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
DS125DF410SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
TLK10232CTR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL		BGA	SQUARE	PLASTIC/EPOXY	YES		1						700 mA			1.05 V			GRID ARRAY		.95 V		.00017 Amp		1 mm	85 Cel	1 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B144	4	3.25 mm	13 mm			TRUE	1		NO	e1	30	260	13 mm		0 ns
TLE62582GXUMA1	Infineon Technologies	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BCDMOS		3000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V	35 V			SMALL OUTLINE		6 V			4.5 V	1.27 mm	125 Cel	13.5 V		-40 Cel	1	TIN	DUAL	R-PDSO-G8	3	1.75 mm	4 mm				1		NO	e3			5 mm		6000 ns
TLE72592GEXUMA1	Infineon Technologies	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	27 V	1		BCDMOS			GENERAL PURPOSE		SCHMITT TRIGGER	13.5 V				SMALL OUTLINE					7 V	1.27 mm	125 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	3	1.75 mm	4 mm				1		NO	e3			5 mm		6000 ns
TLE72592GUXUMA1	Infineon Technologies	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	27 V	1		BCDMOS			GENERAL PURPOSE		SCHMITT TRIGGER	13.5 V				SMALL OUTLINE					7 V	1.27 mm	125 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	4 mm				1		NO		NOT SPECIFIED	NOT SPECIFIED	5 mm		6000 ns
MAX491MSD/PR	Maxim Integrated	LINE TRANSCEIVER	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				60 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	125 Cel			-55 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm				1	TRISTATABLE RECEIVER	YES	e0			8.65 mm		200 ns
SN55LBC173TDA1	Texas Instruments	LINE RECEIVER		NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES		4		BICMOS			EIA-422-A; EIA-423-A; EIA-485; CCITT V.11	11 mA	DIFFERENTIAL	5 V				UNCASED CHIP									3-STATE				UPPER	R-XUUC-N16			1.932 mm			TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	2.04 mm
SN55LBC173TDA2	Texas Instruments	LINE RECEIVER		NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES		4		BICMOS			EIA-422-A; EIA-423-A; EIA-485; CCITT V.11	11 mA	DIFFERENTIAL	5 V				UNCASED CHIP									3-STATE				UPPER	R-XUUC-N16			1.932 mm			TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	2.04 mm
SN65HVD888D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING		SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1						.9 mA		5 V	5.5 V			SMALL OUTLINE		4.5 V				1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.91 mm			COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	2.4 V	0 ns
SN65HVD1792TDEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING		SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				200 ns		6 mA		5 V	5.5 V			SMALL OUTLINE		4.5 V				1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.91 mm		8 Amp	COMPLEMENTARY	1		YES	e4	30	260	8.65 mm	4 V	200 ns
SN65HVD1792TDREP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING		SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				200 ns		6 mA		5 V	5.5 V			SMALL OUTLINE		4.5 V				1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.91 mm		8 Amp	COMPLEMENTARY	1		YES	e4	30	260	8.65 mm	4 V	200 ns
DS90UA101TRTVJQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100					1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
DS90UA101TRTVTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100					1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
DS90UA102TRHSJQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		ISO 10605	96 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm		0 ns
DS90UA102TRHSTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		ISO 10605	96 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm		0 ns
SN55LBC173MKGD1	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES	5.25 V	4		BICMOS			EIA-422-A; EIA-423-A; EIA-485; CCITT V.11	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				UNCASED CHIP					4.75 V		125 Cel		3-STATE	-55 Cel			UPPER	R-XUUC-N16			1.932 mm			TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	2.04 mm		35 ns
DS125BR800ANJYR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES		4	8								2.625 V	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V		-40 Cel		MATTE TIN	QUAD	R-PQCC-N54	2	.8 mm	5.5 mm	Not Qualified			4		YES	e3	30	260	10 mm	2 V
DS125BR800ANJYT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES		4	8								2.625 V	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V		-40 Cel		MATTE TIN	QUAD	R-PQCC-N54	2	.8 mm	5.5 mm	Not Qualified			4		YES	e3	30	260	10 mm	2 V
DS125BR820NJYT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	3.6 V	1	8						DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			3 V	.5 mm	85 Cel	2.5 V		-40 Cel	1	MATTE TIN	QUAD	R-XQCC-N54	2	.8 mm	5.5 mm				1		YES	e3	30	260	10 mm
SN888CD	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				1000 ns		.9 mA		5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers			1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.91 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	195 ns
MAX3188EEUT/GH9-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1					EIA-232; TIA-232		STANDARD	5.4 V			-5.4 V	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					4.5 V	.95 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm						NO				2.9 mm
SN75C189ADB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR			EIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified			4		NO	e4	30	260	6.2 mm		6000 ns
ADM207AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS		5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0		240	15.4 mm	10 V	5000 ns
ADM209AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP24,.4	9 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			15.4 mm	10 V	5000 ns
ADM211ARS	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		240	10.2 mm	10 V	5000 ns
ADM211AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		240	17.9 mm	10 V	5000 ns
MAX212CAG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		2000 ns	EIA-232-E; V.24; V.28; EIA-562	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			8.2 mm	10 V	700 ns
MAX212CWG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		2000 ns	EIA-232-E; V.24; V.28; EIA-562	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			15.4 mm	10 V	700 ns
MAX212EAG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		2000 ns	EIA-232-E; V.24; V.28; EIA-562	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel		3-STATE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			8.2 mm	10 V	700 ns
MAX250CPD	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS			EIA-232	.5 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		3-STATE	0 Cel	2	TIN LEAD	DUAL	R-PDIP-T14	1	5.72 mm	7.62 mm	Not Qualified	3.2 Amp	TRUE	2	ISOLATED DATA INTERFACE-PAIRED WITH MAX251; TTL/CMOS LOGIC TO OPTO INTERFACE	NO	e0	20	240		1.4 V	0 ns
MAX250EJD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1		CMOS			EIA-232	.5 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	2	TIN LEAD	DUAL	R-GDIP-T14	1	5.842 mm	7.62 mm	Not Qualified	3.2 Amp	TRUE	2	ISOLATED DATA INTERFACE-PAIRED WITH MAX251; TTL/CMOS LOGIC TO OPTO INTERFACE	NO	e0	20	240	19.43 mm	1.4 V	0 ns
MAX250EPD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS			EIA-232	.5 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	2	TIN LEAD	DUAL	R-PDIP-T14	1	5.72 mm	7.62 mm	Not Qualified	3.2 Amp	TRUE	2	ISOLATED DATA INTERFACE-PAIRED WITH MAX251; TTL/CMOS LOGIC TO OPTO INTERFACE	NO	e0	20	240		1.4 V	0 ns
MAX250ESD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			EIA-232	.5 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	TRUE	2	ISOLATED DATA INTERFACE-PAIRED WITH MAX251; TTL/CMOS LOGIC TO OPTO INTERFACE	NO	e0			8.65 mm	1.4 V	0 ns
MAX251CPD	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1		CMOS			EIA-232-C; V.28	2.5 mA	SCHMITT TRIGGER	10 V		+-10	-10 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDIP-T14	1	5.72 mm	7.62 mm	Not Qualified	3.2 Amp	TRUE	2	ISOLATED DATA INTERFACE-PAIRED WITH MAX250; RS-232 TO OPTO INTERFACE; TRISTATABLE RECEIVERS	NO	e0	20	240		10 V	0 ns

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.