Rectangular Comparators 725

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MAX9119EXK	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1			1.2 μA				2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	2 nA			-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5				No	e0
MAX9120EXK	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1			1.2 μA				2/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	2 nA			-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5				No	e0
MAX9120ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1			1.2 μA				2/5 V	Small Outline	SOP8,.25	Comparators		0.05 in (1.27 mm)	85 °C (185 °F)	2 nA			-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G8				No	e0
MAX9141EKA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		4.5 mV		Yes	1	BIPOLAR		320 μA				3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	320 nA			-40 °C (-40 °F)		Dual	R-PDSO-G8				No
MAX9032AKA	Maxim Integrated	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2			55 μA				3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators		0.025 in (0.635 mm)	125 °C (257 °F)	80 nA	20 ns		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
MAX9051AEUT	Maxim Integrated	Comparator	Industrial	Gull Wing	6	TSOP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	BIPOLAR		72 μA				3/5 V	Small Outline, Thin Profile	TSOP6,.11,37	Comparators		0.037 in (0.95 mm)	85 °C (185 °F)	10 nA	450 ns		-40 °C (-40 °F)		Dual	R-PDSO-G6				No
NCX2220DP,125	NXP Semiconductors	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		30 mV		Yes	2			7 μA		Tape And Reel, 7 Inch		1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8	1			No		30 s	260 °C (500 °F)
HA1631S02CMEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	1	CMOS		100 μA			3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	100 pA			-40 °C (-40 °F)		Dual	R-PDSO-G5	1			No		20 s	260 °C (500 °F)
HA1631D01MMEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	CMOS		20 μA			3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8				No
HA1631D01TEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	CMOS		20 μA			3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8				No
HA1631D02MMEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	CMOS		200 μA		Tape And Reel, Embosed	3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8				No
HA1631D02TEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	CMOS		200 μA			3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8				No
HA1631D03MMEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	CMOS		20 μA		Tape And Reel, Embosed	3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8				No
HA1631D03TEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	CMOS		20 μA			3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8	1			No		20 s	260 °C (500 °F)
HA1631D04MMEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	CMOS		200 μA		Tape And Reel, Embosed	3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8				No
HA1631D04TEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	CMOS		200 μA			3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8				No
NCX2222DPH	NXP Semiconductors	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		30 mV		Yes	2			14 μA				1.6/5.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-G8	1			No			260 °C (500 °F)
NCX2222GUX	NXP Semiconductors	Comparator	Industrial	No Lead	8	SON	Rectangular	Plastic/Epoxy		30 mV		Yes	2			14 μA				1.6/5.5 V	Small Outline	SOLCC8,.06,16	Comparators		0.016 in (0.4 mm)	85 °C (185 °F)				-40 °C (-40 °F)		Dual	R-PDSO-N8	1			No			260 °C (500 °F)
TC75S59FE(TE85L,F)	Toshiba	Comparator	Industrial	Flat	5	DFP	Rectangular	Plastic/Epoxy		7 mV		Yes	1	CMOS		220 μA				3/5 V	Flatpack	FL5/6,.047,20	Comparators		0.02 in (0.5 mm)	85 °C (185 °F)		170 ns		-40 °C (-40 °F)		Dual	R-PDFP-F5				No
HA1631S01CMEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	1	CMOS		10 μA			3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	100 pA			-40 °C (-40 °F)		Dual	R-PDSO-G5	1			No		20 s	260 °C (500 °F)
HA1631S03CMEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	1	CMOS		10 μA			3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	100 pA			-40 °C (-40 °F)		Dual	R-PDSO-G5	1			No		20 s	260 °C (500 °F)
HA1631S04CMEL-E	Renesas Electronics	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	1	CMOS		100 μA			3 V	3 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	100 pA			-40 °C (-40 °F)		Dual	R-PDSO-G5				No
AD8468WBKSZ-RL	Analog Devices	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		10 mV	400 nA	Yes	1		AEC-Q100	1.3 mA		Tape And Reel	2.5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	400 nA	50 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
NCV2903VDR2G	Onsemi	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		15 mV	500 nA	Yes	2	BIPOLAR	AEC-Q100	2.5 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	150 °C (302 °F)	250 nA	1.5 µs	Open-Collector	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMV339IDT	STMicroelectronics	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		7 mV	400 nA	Yes	4			150 μA		Tape And Reel	2.7 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	400 nA	550 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX9030AXT	Maxim Integrated	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes				55 μA				3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators		0.025 in (0.635 mm)	125 °C (257 °F)	80 nA			-40 °C (-40 °F)		Dual	R-PDSO-G6	1			No
NCX2200GM,115	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1			9 μA		Tape And Reel, 7 Inch	1.6 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC6,.04,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)	Tin	Dual	R-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.057 in (1.45 mm)
NCX2200GM,132	NXP Semiconductors	Comparator	Industrial	No Lead	6	VSON	Rectangular	Plastic/Epoxy		30 mV		Yes	1			9 μA		Tape And Reel, 7 Inch	1.6 V	1.6/5.5 V	Small Outline, Very Think Profile	SOLCC6,.04,20	Comparators	7 V	0.02 in (0.5 mm)	85 °C (185 °F)		800 ns	Push-Pull	-40 °C (-40 °F)	Tin	Dual	R-PDSO-N6	1	0.02 in (0.5 mm)	0.039 in (1 mm)	No	e3	30 s	260 °C (500 °F)	0.057 in (1.45 mm)
LM139AJ/PB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		4 mV	300 nA	No	4	BIPOLAR		2 mA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	300 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.77 in (19.56 mm)
LM339N/PB	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		9 mV	400 nA	No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.18 mm)
LP339N/PB	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		9 mV	40 nA	No	4	BIPOLAR					5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)		8 µs	Open-Drain	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)		e0			0.755 in (19.18 mm)
TS334IDT	STMicroelectronics	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6 mV	100 nA	Yes	4			38 μA		Tape And Reel	1.8 V	1.8/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		420 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM2903WYPT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		15 mV	400 nA	Yes	2		AEC-Q100			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)					0.173 in (4.4 mm)
LMV7239QM7X/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV	600 nA	Yes	1	BIPOLAR	AEC-Q100	95 μA		Tape And Reel	5 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	400 nA	75 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
LM529CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR						5,±10 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1			No	e0
UPC277GR(5)-9LG-E1-A	Renesas Electronics	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		2.5 mV	60 nA	Yes	2	BIPOLAR		1 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	32 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.8 µs	Open-Collector	-40 °C (-40 °F)	Tin Bismuth	Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No	e6			0.173 in (4.4 mm)
MAX9120ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1						5 V		Small Outline		Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)		45 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)		e0			0.193 in (4.9 mm)
MAX921CSA-TG077	Maxim Integrated	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	1			4 μA			3 V		Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	70 °C (158 °F)		14 µs		0 °C (32 °F)		Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)					0.193 in (4.9 mm)
MAX905CPD	Maxim Integrated	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy	-6 V	1.5 mV	10 uA	No	1			24 mA	-5 V		5 V	5/GND,-5/-5.2 V	In-Line	DIP14,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	2 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T14		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
MAX906CPE	Maxim Integrated	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy	-6 V	2.5 mV	10 uA	No	1			48 mA	-5 V		5 V	5/GND,-5/-5.2 V	In-Line	DIP16,.3	Comparators	6 V	0.1 in (2.54 mm)	70 °C (158 °F)	10 uA	2 ns		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T16		0.225 in (5.72 mm)	0.3 in (7.62 mm)	No	e0
LP239D	Texas Instruments	Comparator	Other	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	40 nA	Yes	4	BIPOLAR		100 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.341 in (8.65 mm)
TLC339CD	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC354MN	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		10 mV	20 nA	No	4	CMOS		400 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.76 in (19.305 mm)
TLC339MDR	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC339MD	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
LM111JG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	No	1	BIPOLAR		6 mA	-15 V	Tube	15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	115 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.377 in (9.58 mm)
TL3116CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	1.2 uA	Yes	1	BIPOLAR		14.7 mA	-5 V	Tube	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TL3116ID	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-7 V	3 mV	1.5 uA	Yes	1	BIPOLAR		14.7 mA	-5 V	Tube	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)	1.1 uA	9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.