Automotive Comparators 181

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

AD8564AR-REEL

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

10 mV

9 uA

Yes

4

15.6 mA

-5 V

Tape And Reel

5 V

5,5/10,GND/-5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

400 nA

8 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

NCV2901DR2

Onsemi

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

235 °C (455 °F)

0.341 in (8.65 mm)

NCV2903DR2

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

0 V

5 V

±1/±18/2/36 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

30 s

235 °C (455 °F)

0.193 in (4.9 mm)

ADCMP391ARZ-RL7

Analog Devices

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

80 nA

Yes

1

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

4.9 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

NCV2903DMR2

Onsemi

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

0 V

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

30 s

235 °C (455 °F)

0.118 in (3 mm)

TLV3492AID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

2

CMOS

2.4 μA

Tube

5 V

2/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903HDT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

150 °C (302 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

0.193 in (4.9 mm)

LM2903HD

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

150 °C (302 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

0.193 in (4.9 mm)

TLV3702QDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

2

AEC-Q100

1.6 μA

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

AD8465WBCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

AEC-Q100

3 mA

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

1.6 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LM2903VDG

Onsemi

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40

260 °C (500 °F)

0.193 in (4.9 mm)

MAX9032ASA-T

Maxim Integrated

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

2

110 μA

0 V

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX9032AUA-T

Maxim Integrated

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

2

110 μA

0 V

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

MAX9034AUD-T

Maxim Integrated

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

5 mV

80 nA

Yes

4

220 μA

0 V

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

80 nA

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.197 in (5 mm)

LM239AQDREP

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

2.5 mV

-400 nA

Yes

4

BIPOLAR

2 mA

0 V

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector, Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

AD8564ANZ

Analog Devices

Comparator

Automotive

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-7 V

10 mV

9 uA

No

4

15.6 mA

-5 V

5 V

5,5/10,GND/-5 V

In-Line

DIP16,.3

Comparators

7 V

0.1 in (2.54 mm)

125 °C (257 °F)

400 nA

8 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T16

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

0.79 in (20.07 mm)

AD8564ARZ-REEL

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

10 mV

9 uA

Yes

4

15.6 mA

-5 V

Tape And Reel

5 V

5,5/10,GND/-5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

400 nA

8 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

CMP402GSZ

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-8 V

4 mV

4 uA

Yes

4

BICMOS

-5 V

5 V

3/5/±5 V

Small Outline

SOP16,.25

Comparators

8 V

0.05 in (1.27 mm)

125 °C (257 °F)

3 uA

60 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

ADCMP354YKS-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

4

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

15 μA

Tape And Reel, 7 Inch

3.3 V

3.3 V

Small Outline, Thin Profile, Shrink Pitch

SOT-343R

Comparators

6 V

125 °C (257 °F)

30 ns

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G4

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

240 °C (464 °F)

0.079 in (2 mm)

ADCMP356YKS-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

4

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

15 μA

Tape And Reel, 7 Inch

3.3 V

3.3 V

Small Outline, Thin Profile, Shrink Pitch

SOT-343R

Comparators

6 V

125 °C (257 °F)

30 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G4

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

240 °C (464 °F)

0.079 in (2 mm)

TLV3501AID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903PSRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.3

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.244 in (6.2 mm)

TLV3401IDBVRG4

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

1

640 nA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3402IDGKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.9 μA

0 V

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV3501AIDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3701IDBVTG4

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

1

CMOS

800 nA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

17 V

0.037 in (0.95 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LM2903VNG

Onsemi

Comparator

Automotive

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

15 mV

500 nA

No

2

BIPOLAR

2.5 mA

5 V

5 V

In-Line

DIP8,.3

Comparators

36 V

0.1 in (2.54 mm)

125 °C (257 °F)

250 nA

1.5 µs

Open-Collector

-40 °C (-40 °F)

Tin

Dual

R-PDIP-T8

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

40

260 °C (500 °F)

0.365 in (9.27 mm)

LM2901DRE4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM2901PWG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

7 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LM2903DRE4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5/30 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LMV331IDCKTE4

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

BIPOLAR

120 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

LMV339IPWRE4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

400 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV3011AIDCKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

15 mV

Yes

1

5 μA

Tape And Reel

5 V

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

12 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

TLV3402IDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

2

1.28 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP8,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3404IPWRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

2.56 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV3702IDGKG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

2

CMOS

1.6 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV3704IPWRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

1.5 nA

Yes

4

CMOS

3.2 μA

0 V

Tape And Reel

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

240 µs

Push-Pull

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV3501AIDBVRG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 mA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3501AIDBVTG4

Texas Instruments

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

1

5 mA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV3502AIDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

2

10 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3502AID

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

2

10 mA

Tube

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903DGKRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

15 mV

-500 nA

Yes

2

BIPOLAR

1 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

TLV3404IDG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

2.56 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline

SOP14,.25

Comparators

17 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

TS339IYDT

STMicroelectronics

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

6.5 mV

600 pA

Yes

4

CMOS

25 μA

0 V

3 V

3/5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

600 pA

1.5 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

0.341 in (8.65 mm)

TLV3494AIDRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

15 mV

10 pA

Yes

4

CMOS

1.2 μA

5 V

2/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

10 pA

12 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

TLV3502AIDCNRG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

6.5 mV

10 pA

Yes

2

10 mA

Tape And Reel

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

7.5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

2

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP580BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

-5 V

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP581BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

-5 V

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.