Gull Wing Comparators 690

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Minimum Isolation Voltage	Packing Method	Nominal Supply Voltage / Vsup (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
MCP6567-E/MSVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	10 mV	5 nA	Yes	2	CMOS	TS 16949	260 μA		Tube	1.8 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		80 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	e3			0.118 in (3 mm)
MCP6567T-E/MSVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	10 mV	5 nA	Yes	2	CMOS	TS 16949	260 μA		Tape And Reel	1.8 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		80 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	e3			0.118 in (3 mm)
MCP6541T-E/OTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	7 mV	5 nA	Yes	1	CMOS	AEC-Q100; TS 16949	1 μA		Tape And Reel	5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	125 °C (257 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.061 in (1.55 mm)	e3			0.114 in (2.9 mm)
MCP6542T-E/SNVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	7 mV	5 nA	Yes	2	CMOS	AEC-Q100; TS 16949	2 μA		Tape And Reel	5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	125 °C (257 °F)		4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	e3			0.193 in (4.9 mm)
MCP6546T-E/OTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	7 mV	5 nA	Yes	1	CMOS	AEC-Q100	1 μA		Tape And Reel	5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	125 °C (257 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.059 in (1.5 mm)	e3			0.114 in (2.9 mm)
MCP6547T-E/MSVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	7 mV	5 nA	Yes	2	CMOS	AEC-Q100	2 μA		Tape And Reel	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)		3 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	e3			0.118 in (3 mm)
MCP6561T-E/LTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	10 mV	5 nA	Yes	1	CMOS	AEC-Q100	130 μA		Tape And Reel	1.8 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		56 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)				0.079 in (2 mm)
MCP6561T-E/OTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	10 mV	5 nA	Yes	1	CMOS	AEC-Q100	130 μA		Tape And Reel	1.8 V	Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6.5 V	0.037 in (0.95 mm)	125 °C (257 °F)		56 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.1 in (2.55 mm)				0.114 in (2.9 mm)
MCP6562T-E/MSVAO	Microchip Technology	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	10 mV	5 nA	Yes	2	CMOS	AEC-Q100	260 μA		Tape And Reel	1.8 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	6.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		56 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	e3			0.118 in (3 mm)
MCP6566T-E/OTVAO	Microchip Technology	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	10 mV	5 nA	Yes	1	CMOS	AEC-Q100; TS 16949	130 μA		Tape And Reel	1.8 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6.5 V	0.037 in (0.95 mm)	125 °C (257 °F)		56 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.061 in (1.55 mm)	e3			0.114 in (2.9 mm)
TLV3604DCKT	Texas Instruments	Comparator	Automotive	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy	5 mV	5 uA	Yes	1			17.5 mA			2.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08		5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	0.8 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
LM393LVQDRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	3 mV		Yes	2		AEC-Q100	100 μA		Tape And Reel, 13 Inch	5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	125 °C (257 °F)		600 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)	e4	30 s	260 °C (500 °F)	0.193 in (4.905 mm)
PLM393LVQPWRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy	2 mV		Yes	2		AEC-Q100	70 μA		Tape And Reel	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 pA	600 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLV3601DCKT	Texas Instruments	Comparator		Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	5 mV	5 uA	Yes	1			7 mA		Tape And Reel	2.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	e4		260 °C (500 °F)	0.079 in (2 mm)
TLV3601DBVT	Texas Instruments	Comparator		Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	5 mV	5 uA	Yes	1			7 mA		Tape And Reel	2.5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		6 V	0.037 in (0.95 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	e4		260 °C (500 °F)	0.114 in (2.9 mm)
AMC23C14DWV	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		25 nA	Yes	2			2.2 mA	750 V		3.3 V	Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)	e4		260 °C (500 °F)	0.295 in (7.5 mm)
AMC23C12DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		25 nA	Yes	1			4.3 mA	750 V	Tape And Reel	5 V	Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)	e4		260 °C (500 °F)	0.295 in (7.5 mm)
TLV3602DGKT	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Square	Plastic/Epoxy	5 mV	5 uA	Yes	2			14 mA		Tape And Reel	2.5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	e4		260 °C (500 °F)	0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.