Analog Devices Comparators 94

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

AD8468WBKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

10 mV

400 nA

Yes

1

AEC-Q100

1.3 mA

Tape And Reel

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

50 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

30 s

260 °C (500 °F)

0.079 in (2 mm)

ADCMP563BCPZ-R2

Analog Devices

Comparator

Industrial

No Lead

16

HVQCCN

Square

-6 V

10 mV

10 uA

Yes

2

BIPOLAR

-5.2 V

Tape And Reel

5 V

5,-5.2 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

10 uA

.83 ns

Open-Emitter

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

AD8469WBRMZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5 mV

400 nA

Yes

1

BIPOLAR

AEC-Q100

1.1 mA

Tape And Reel

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

40 ns

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

CMP401GS-REEL

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-8 V

4 mV

4 uA

Yes

4

BICMOS

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline

SOP16,.25

Comparators

8 V

0.05 in (1.27 mm)

125 °C (257 °F)

3 uA

33 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

CMP402GRU-REEL

Analog Devices

Comparator

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

-8 V

4 mV

4 uA

Yes

4

BICMOS

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Comparators

8 V

0.026 in (0.65 mm)

125 °C (257 °F)

3 uA

60 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.197 in (5 mm)

CMP402GS-REEL

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-8 V

4 mV

4 uA

Yes

4

BICMOS

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline

SOP16,.25

Comparators

8 V

0.05 in (1.27 mm)

125 °C (257 °F)

3 uA

60 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

CMP402GS

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-8 V

4 mV

4 uA

Yes

4

BICMOS

-5 V

5 V

3/5/±5 V

Small Outline

SOP16,.25

Comparators

8 V

0.05 in (1.27 mm)

125 °C (257 °F)

3 uA

60 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

AD790JN

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

6.5 uA

No

1

BIPOLAR

-15 V

15 V

5,5/±15 V

In-Line

DIP8,.3

Comparators

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

5 uA

45 ns

Push-Pull

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

0.175 in (4.44 mm)

0.3 in (7.62 mm)

No

e0

AD790JR-REEL7

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

6.5 uA

Yes

1

BIPOLAR

-15 V

Tape And Reel, 7 Inch

15 V

5,5/±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 uA

45 ns

Push-Pull

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD790JR-REEL

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

6.5 uA

Yes

1

BIPOLAR

-15 V

Tape And Reel

15 V

5,5/±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 uA

45 ns

Push-Pull

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD790JR

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

1.5 mV

6.5 uA

Yes

1

BIPOLAR

-15 V

15 V

5,5/±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

5 uA

45 ns

Push-Pull

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

30 s

240 °C (464 °F)

0.193 in (4.9 mm)

AD790SQ

Analog Devices

Comparator

Military

Through-Hole

8

DIP

Rectangular

Ceramic, Glass-Sealed

-18 V

1.5 mV

7 uA

No

1

BIPOLAR

-15 V

15 V

5,5/±15 V

In-Line

DIP8,.3

Comparators

18 V

0.1 in (2.54 mm)

125 °C (257 °F)

5 uA

60 ns

Push-Pull

-55 °C (-67 °F)

Tin Lead

Dual

R-GDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

AD9686TQ

Analog Devices

Comparator

Military

Through-Hole

16

DIP

Rectangular

Ceramic

3 mV

No

BIPOLAR

35 mA

5,-6 V

In-Line

DIP16,.3

Comparators

0.1 in (2.54 mm)

125 °C (257 °F)

10 uA

7 ns

-55 °C (-67 °F)

Tin Lead

Dual

R-XDIP-T16

No

e0

AD8561AN

Analog Devices

Comparator

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-7 V

7 mV

No

1

BIPOLAR

-5 V

5 V

3/5/±5 V

In-Line

DIP8,.3

Comparators

7 V

0.1 in (2.54 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e0

0.389 in (9.88 mm)

AD8561AR

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

5 V

3/5/±5 V

Small Outline

SOP8,.45

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

30 s

240 °C (464 °F)

0.193 in (4.9 mm)

AD1317KZ

Analog Devices

Comparator

Commercial

Gull Wing

16

SOP

Square

Ceramic, Metal-Sealed Cofired

-9 V

10 mV

Yes

1

-5.2 V

10 V

10,-5.2 V

Small Outline

SOP16,.7

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

33 uA

1.8 ns

Open-Emitter

0 °C (32 °F)

Tin Lead

Dual

S-CDSO-G16

0.133 in (3.38 mm)

0.45 in (11.43 mm)

No

e0

0.45 in (11.43 mm)

AD96687BQ

Analog Devices

Comparator

Other

Through-Hole

16

DIP

Rectangular

Ceramic, Glass-Sealed

-6.5 V

3 mV

13 uA

No

2

BIPOLAR

36 mA

-5.2 V

5 V

5,-5.2 V

In-Line

DIP16,.3

Comparators

6.5 V

0.1 in (2.54 mm)

85 °C (185 °F)

10 uA

2.5 ns

Open-Emitter

-25 °C (-13 °F)

Tin Lead

Dual

R-GDIP-T16

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

0.75 in (19.05 mm)

AD96685BR

Analog Devices

Comparator

Other

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6.5 V

3 mV

13 uA

Yes

1

BIPOLAR

-5.2 V

5 V

5,-5.2 V

Small Outline

SOP16,.25

Comparators

6.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 uA

2.5 ns

Open-Emitter

-25 °C (-13 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

AD96687BR-REEL

Analog Devices

Comparator

Other

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6.5 V

3 mV

13 uA

Yes

2

BIPOLAR

-5.2 V

Tape And Reel

5 V

5,-5.2 V

Small Outline

SOP16,.25

Comparators

6.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 uA

2.5 ns

Open-Emitter

-25 °C (-13 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

AD96687BR

Analog Devices

Comparator

Other

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6.5 V

3 mV

13 uA

Yes

2

BIPOLAR

36 mA

-5.2 V

5 V

5,-5.2 V

Small Outline

SOP16,.4

Comparators

6.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 uA

2.5 ns

Open-Emitter

-25 °C (-13 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

AD8561AR-REEL7

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel, 7 Inch

5 V

3/5/±5 V

Small Outline

SOP8,.45

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD8561ARU-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

240 °C (464 °F)

0.173 in (4.4 mm)

AD8564AR-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

10 mV

9 uA

Yes

4

15.6 mA

-5 V

Tape And Reel, 7 Inch

5 V

5,5/10,GND/-5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

400 nA

8 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

AD96685BR-REEL

Analog Devices

Comparator

Other

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-6.5 V

3 mV

13 uA

Yes

1

BIPOLAR

-5.2 V

Tape And Reel

5 V

5,-5.2 V

Small Outline

SOP16,.25

Comparators

6.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

10 uA

2.5 ns

Open-Emitter

-25 °C (-13 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

AD8564AR

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-7 V

10 mV

9 uA

Yes

4

15.6 mA

-5 V

5 V

5,5/10,GND/-5 V

Small Outline

SOP16,.25

Comparators

7 V

0.05 in (1.27 mm)

125 °C (257 °F)

400 nA

8 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.39 in (9.9 mm)

AD8612ARU

Analog Devices

Comparator

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-4 uA

Yes

1

10 mA

0 V

3 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4.5 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.197 in (5 mm)

AD8561AR-REEL

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

8 mV

Yes

1

BIPOLAR

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline

SOP8,.45

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

7 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

ADCMP370AKS-REEL7

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel, 7 Inch

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead Over Silver

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

240 °C (464 °F)

0.079 in (2 mm)

ADCMP370AKS-REEL

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Open-Drain

-40 °C (-40 °F)

Tin/Lead (Sn85Pb15) - with Silver barrier

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

0.079 in (2 mm)

ADCMP371AKS-REEL7

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel, 7 Inch

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Push-Pull

-40 °C (-40 °F)

Tin Lead Over Silver

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

0.079 in (2 mm)

ADCMP371AKS-REEL

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

0.079 in (2 mm)

ADCMP371AKSZ-REEL7

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

9 mV

50 nA

Yes

1

7 μA

Tape And Reel, 7 Inch

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

ADCMP600BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

ADCMP600BRJZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

ADCMP601BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP604BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

21 mA

Tape And Reel

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP605BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

3 mA

Tape And Reel

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP605BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

3 mA

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADCMP603BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

CMOS

Tape And Reel

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP603BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

CMOS

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

5.5 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

5 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP607BCPZ-R2

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

BIPOLAR

1.5 mA

Tape And Reel

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP607BCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

BIPOLAR

1.5 mA

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

2.1 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP608BKSZ-R2

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

1

CMOS

1.3 mA

2.5 V

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

60 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP608BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

1

CMOS

1.3 mA

Tape And Reel

2.5 V

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

60 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP609BRMZ-REEL

Analog Devices

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5 mV

400 nA

Yes

1

1.1 mA

Tape And Reel

2.5 V

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP609BRMZ

Analog Devices

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5 mV

400 nA

Yes

1

1.1 mA

2.5 V

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

AD8145WYCPZ-R7

Analog Devices

Comparator

Industrial

No Lead

32

HVQCCN

Square

-6 V

8 mV

-900 nA

Yes

3

AEC-Q100

-5 V

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

Comparators

6 V

0.02 in (0.5 mm)

105 °C (221 °F)

6 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADCMP395ARMZ

Analog Devices

Comparator

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

5 mV

80 nA

Yes

2

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

9.7 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.