Maxim Integrated Comparators 396

  1. Home
  2. Comparators
Manufacturers (1)
    • Maxim Integrated
    • Analog Devices
    • Diodes Incorporated
    • Fairchild Semiconductor
    • Forward International Electronics
    • General Electric Solid State
    • Infineon Technologies
    • Intersil
    • Linear Technology
    • Micrel
    • Microchip Technology
    • Motorola
    • NXP Semiconductors
    • National Semiconductor
    • New Japan Radio
    • Onsemi
    • Philips Semiconductors
    • ROHM
    • Renesas Electronics
    • STMicroelectronics
    • Samsung
    • Sharp Corporation
    • Silicon Labs
    • Texas Instruments
    • Toshiba
Amplifier Type
    • Comparator
    • Operational Amplifier
Temperature Grade
    • Automotive
    • Commercial
    • Commercial Extended
    • Industrial
    • Military
    • Other
Terminal Form
    • Ball
    • Bu
    • Butt
    • Flat
    • Gull Wing
    • J Bend
    • No Lead
    • Pin/Peg
    • Through-Hole
    • Wire
No. of Terminals
    • 10
    • 100
    • 12
    • 13
    • 14
    • 15
    • 16
    • 18
    • 20
    • 23
    • 24
    • 25
    • 28
    • 3
    • 30
    • 32
    • 36
    • 4
    • 5
    • 6
    • 64
    • 7
    • 8
    • 80
    • 9
Package Code
    • BCC
    • BGA
    • DFP
    • DIE
    • DIP
    • FBGA
    • HQCCN
    • HSOP
    • HSSOP
    • HTFQFP
    • HTSOP
    • HTSSOP
    • HVBCC
    • HVQCCN
    • HVSON
    • LSOP
    • LSSOP
    • QCCJ
    • QCCN
    • SIP
    • SON
    • SOP
    • SSOP
    • TFQFP
    • TO-100
    • TO-5
    • TO-99
    • TSOP
    • TSSOP
    • VBCC
    • VFBGA
    • VFLGA
    • VQCCN
    • VSOF
    • VSON
    • VSSOP
Package Shape
    • Rectangular
    • Round
    • Square
Total Dose (V)
    • 100k Rad(Si)
    • 200k Rad(Si)
    • 300k Rad(Si)
    • 40k Rad(Si)
    • 50k Rad(Si)
    • MIL-PRF-38535 Class V
Package Body Material
    • Ceramic
    • Ceramic, Glass-Sealed
    • Ceramic, Metal-Sealed Cofired
    • Metal
    • Plastic
    • Plastic/Epoxy
Nominal Unity Gain Bandwidth
    • 5.5 kHz
Maximum Negative Supply Voltage Limit
    • -0.3 V
    • -0.5 V
    • -10 V
    • -15 V
    • -16 V
    • -16.5 V
    • -18 V
    • -20 V
    • -22 V
    • -25 V
    • -3.3 V
    • -30 V
    • -5 V
    • -6 V
    • -6.25 V
    • -6.3 V
    • -6.5 V
    • -6.6 V
    • -7 V
    • -7.85 V
    • -8 V
    • -9 V
    • 0 V
Maximum Input Offset Voltage
    • 0.012 µV
    • 1 mV
    • 1.2 mV
    • 1.4 mV
    • 1.5 mV
    • 1.6 mV
    • 10 mV
    • 100 mV
    • 100 uV
    • 11 mV
    • 11.5 mV
    • 12 mV
    • 125 uV
    • 13 mV
    • 14 mV
    • 15 mV
    • 16 mV
    • 18 mV
    • 2 mV
    • 2.2 mV
    • 2.4 mV
    • 2.5 mV
    • 2.8 mV
    • 2.9 mV
    • 20 mV
    • 200 uV
    • 22 mV
    • 25 mV
    • 3 mV
    • 3.2 mV
    • 3.5 mV
    • 3.8 mV
    • 30 mV
    • 32 mV
    • 35 uV
    • 4 mV
    • 4.3 mV
    • 4.4 mV
    • 4.5 mV
    • 4.7 mV
    • 40 mV
    • 5 mV
    • 5.5 mV
    • 50 mV
    • 50 uV
    • 500 uV
    • 6 mV
    • 6.3 mV
    • 6.5 mV
    • 6.8 mV
    • 650 uV
    • 7 mV
    • 7.5 mV
    • 75 mV
    • 750 uV
    • 8 mV
    • 8.5 mV
    • 800 uV
    • 9 mV
    • 9.5 mV
    • 900 uV
Maximum Average Bias Current (IIB)
    • -1 nA
    • -1 uA
    • -2 uA
    • -20 nA
    • -250 nA
    • -300 nA
    • -300 uA
    • -4 uA
    • -40 nA
    • -400 nA
    • -50 nA
    • -50 uA
    • -500 nA
    • -6 uA
    • -7 uA
    • -900 nA
    • 0 uA
    • 0.04 pA
    • 0.05 pA
    • 0.4 pA
    • 1 mA
    • 1 nA
    • 1 pA
    • 1 uA
    • 1.2 nA
    • 1.2 uA
    • 1.4 mA
    • 1.4 uA
    • 1.5 nA
    • 1.5 uA
    • 1.6 nA
    • 1.8 uA
    • 10 nA
    • 10 pA
    • 10 uA
    • 100 nA
    • 100 pA
    • 100 uA
    • 110 uA
    • 13 uA
    • 130 nA
    • 140 nA
    • 15 nA
    • 15 uA
    • 150 nA
    • 150 pA
    • 150 uA
    • 16 uA
    • 160 nA
    • 2 nA
    • 2 pA
    • 2 uA
    • 2.1 uA
    • 2.3 uA
    • 2.5 uA
    • 2.9 uA
    • 20 nA
    • 20 uA
    • 200 nA
    • 200 pA
    • 21 uA
    • 25 nA
    • 25 uA
    • 250 nA
    • 275 nA
    • 3 nA
    • 3 uA
    • 3.8 uA
    • 30 nA
    • 30 pA
    • 30 uA
    • 300 nA
    • 300 pA
    • 320 nA
    • 35 uA
    • 350 nA
    • 36 uA
    • 4 nA
    • 4 pA
    • 4 uA
    • 4.5 uA
    • 40 nA
    • 40 uA
    • 400 nA
    • 400 uA
    • 42 uA
    • 45 nA
    • 45 uA
    • 475 nA
    • 5 nA
    • 5 pA
    • 5 uA
    • 50 nA
    • 50 pA
    • 50 uA
    • 500 nA
    • 500 pA
    • 55 uA
    • 6 uA
    • 6.5 uA
    • 60 nA
    • 600 nA
    • 600 pA
    • 600 uA
    • 65 nA
    • 7 uA
    • 8 uA
    • 80 nA
    • 800 nA
    • 9 uA
    • 90 nA
    • 900 nA
    • 950 nA
    • 99 pA
Surface Mount
    • No
    • Yes
No. of Functions
    • 1
    • 2
    • 3
    • 4
    • 6
    • 8
Minimum Common Mode Reject Ratio
    • 100 dB
    • 120 dB
    • 96 dB
Technology
    • BICMOS
    • BIPOLAR
    • CMOS
    • ECL
    • TTL
Screening Level
    • 38535Q/M;38534H;883B
    • 38535V;38534K;883S
    • AEC-Q100
    • AEC-Q100; TS 16949
    • MIL-M-38510
    • MIL-M-38510 Class B
    • MIL-M-38510 Class S
    • MIL-PRF-38535
    • MIL-PRF-38535 Class B
    • MIL-PRF-38535 Class N
    • MIL-PRF-38535 Class Q
    • MIL-PRF-38535 Class S
    • MIL-PRF-38535 Class T
    • MIL-PRF-38535 Class V
    • MIL-STD-883
    • MIL-STD-883 Class B
    • MIL-STD-883 Class B (Modified)
    • MIL-STD-883 Class C
    • MIL-STD-883 Class S (Modified)
    • MIL-STD-883 Class V
    • TS 16949
Nominal Common Mode Reject Ratio
    • 68 dB
    • 70 dB
Maximum Supply Current
    • 1 mA
    • 1 μA
    • 1.03 μA
    • 1.1 mA
    • 1.1 μA
    • 1.2 mA
    • 1.2 μA
    • 1.25 mA
    • 1.25 μA
    • 1.26 μA
    • 1.28 μA
    • 1.3 mA
    • 1.3 μA
    • 1.35 μA
    • 1.4 mA
    • 1.5 mA
    • 1.5 μA
    • 1.6 mA
    • 1.6 μA
    • 1.7 mA
    • 1.7 μA
    • 1.8 mA
    • 1.9 μA
    • 10 mA
    • 10 μA
    • 100 μA
    • 11 mA
    • 11 μA
    • 11.5 mA
    • 110 μA
    • 12 mA
    • 12 μA
    • 12.5 mA
    • 120 μA
    • 125 μA
    • 13 mA
    • 13 μA
    • 13.5 mA
    • 130 μA
    • 135 μA
    • 14 mA
    • 14 μA
    • 14.7 mA
    • 140 μA
    • 15 mA
    • 15 μA
    • 15.5 mA
    • 15.6 mA
    • 150 nA
    • 150 μA
    • 16 mA
    • 16 μA
    • 17 mA
    • 17 μA
    • 17.5 mA
    • 170 μA
    • 175 μA
    • 18 mA
    • 18 μA
    • 19 mA
    • 192 μA
    • 2 mA
    • 2 μA
    • 2.1 mA
    • 2.1 μA
    • 2.2 mA
    • 2.2 μA
    • 2.25 mA
    • 2.3 mA
    • 2.4 mA
    • 2.4 μA
    • 2.5 mA
    • 2.55 μA
    • 2.56 μA
    • 2.6 mA
    • 2.7 mA
    • 2.8 mA
    • 2.8 μA
    • 20 mA
    • 20 μA
    • 200 μA
    • 21 mA
    • 22 mA
    • 22 μA
    • 220 μA
    • 23 mA
    • 24 mA
    • 24 μA
    • 25 mA
    • 25 μA
    • 250 μA
    • 26 mA
    • 26 μA
    • 26.6 mA
    • 260 μA
    • 28 μA
    • 3 mA
    • 3 μA
    • 3.2 μA
    • 3.5 mA
    • 3.6 mA
    • 3.6 μA
    • 3.7 mA
    • 3.8 μA
    • 30 mA
    • 30 μA
    • 300 μA
    • 32 mA
    • 32 μA
    • 320 μA
    • 330 μA
    • 34 mA
    • 34 μA
    • 35 mA
    • 35 μA
    • 350 μA
    • 36 mA
    • 37 mA
    • 38 mA
    • 38 μA
    • 384 μA
    • 4 mA
    • 4 μA
    • 4.2 mA
    • 4.3 mA
    • 4.5 mA
    • 4.5 μA
    • 4.8 mA
    • 4.8 μA
    • 40 mA
    • 40 μA
    • 400 μA
    • 42 mA
    • 430 μA
    • 44 mA
    • 44 μA
    • 440 μA
    • 45 mA
    • 48 mA
    • 48 μA
    • 49.7 μA
    • 5 mA
    • 5 μA
    • 5.5 μA
    • 5.7 μA
    • 5.8 μA
    • 5.9 mA
    • 50 mA
    • 50 μA
    • 500 μA
    • 52 mA
    • 520 μA
    • 54 mA
    • 55 mA
    • 55 μA
    • 550 μA
    • 6 mA
    • 6 μA
    • 6.5 mA
    • 6.5 μA
    • 6.6 μA
    • 60 mA
    • 60 μA
    • 600 μA
    • 62 mA
    • 63 μA
    • 630 nA
    • 64 mA
    • 64 μA
    • 640 nA
    • 65 μA
    • 650 μA
    • 7 mA
    • 7 μA
    • 7.5 mA
    • 7.5 μA
    • 7.8 mA
    • 70 mA
    • 70 μA
    • 700 μA
    • 710 nA
    • 72 μA
    • 75 μA
    • 750 μA
    • 76 mA
    • 79.6 mA
    • 8 mA
    • 8 μA
    • 8.2 mA
    • 8.4 μA
    • 8.5 mA
    • 8.5 μA
    • 8.6 mA
    • 80 mA
    • 80 μA
    • 800 nA
    • 800 μA
    • 85 μA
    • 9 mA
    • 9 μA
    • 90 mA
    • 90 μA
    • 900 nA
    • 95 mA
    • 95 μA
    • 950 nA
    • 96 μA
Nominal Negative Supply Voltage (Vsup)
    • -10 V
    • -12 V
    • -15 V
    • -3 V
    • -4.75 V
    • -5 V
    • -5.2 V
    • -5.25 V
    • -6 V
    • 0 V
Minimum Isolation Voltage
    • 560 V
    • 750 V
Packing Method
    • Bulk
    • Rail
    • Reel
    • Tape And Reel
    • Tape And Reel, 13 Inch
    • Tape And Reel, 7 Inch
    • Tape And Reel, Embosed
    • Tape And Reel, Tube
    • Tube
Nominal Supply Voltage / Vsup (V)
    • 1.2 V
    • 1.5 V
    • 1.6 V
    • 1.7 V
    • 1.8 V
    • 10 V
    • 12 V
    • 15 V
    • 2 V
    • 2.5 V
    • 2.7 V
    • 2.85 V
    • 3 V
    • 3.3 V
    • 30 V
    • 35 V
    • 36 V
    • 4.5 V
    • 4.75 V
    • 5 V
    • 5.25 V
    • 6 V
    • 8 V
    • 9 V
    • 9.75 V
Power Supplies (V)
    • -3,2,3.3 V
    • -3,3.3 V
    • -3.9/-7.7,7.7/11 V
    • -5 V
    • 0.9/6.5 V
    • 1.1/40 V
    • 1.2/5 V
    • 1.5/3 V
    • 1.5/5 V
    • 1.5/5.5 V
    • 1.6/5.5 V
    • 1.7/5 V
    • 1.8 V
    • 1.8/5 V
    • 1/5 V
    • 1/5.5 V
    • 10 V
    • 10,-5.2 V
    • 10/16 V
    • 10/18 V
    • 12 V
    • 12,-3/-12 V
    • 12,-6 V
    • 2.1/5.5 V
    • 2.2/36 V
    • 2.2/5 V
    • 2.5 V
    • 2.5/28 V
    • 2.5/3.3 V
    • 2.5/5 V
    • 2.5/5.5 V
    • 2.7 V
    • 2.7/10 V
    • 2.7/12 V
    • 2.7/15 V
    • 2.7/16 V
    • 2.7/5 V
    • 2.7/5.5 V
    • 2.7/5/12 V
    • 2/10 V
    • 2/36 V
    • 2/5 V
    • 3 V
    • 3.3 V
    • 3.3,5,-5.2 V
    • 3.3/5 V
    • 3/15 V
    • 3/16 V
    • 3/5 V
    • 3/5/±5 V
    • 35 V
    • 4/10 V
    • 4/16 V
    • 5 V
    • 5,-15 V
    • 5,-5.2 V
    • 5,-6 V
    • 5,5/10,GND/-5 V
    • 5,5/±15 V
    • 5,GND/-5.2 V
    • 5,±10 V
    • 5,±15 V
    • 5/10 V
    • 5/12 V
    • 5/15 V
    • 5/28 V
    • 5/30 V
    • 5/32 V
    • 5/40 V
    • 5/GND,-5/-5.2 V
    • 5/±15 V
    • 5/±5 V
    • ±1.25/±2.75/2.5/5.5 V
    • ±1.25/±5.5/2.5/11 V
    • ±1.25/±8/2.5/16 V
    • ±1.35/±8/2.7/16 V
    • ±1.5/±18/3/36 V
    • ±1.5/±2.5/3/5 V
    • ±1.5/±8/3/16 V
    • ±1/±18/2/36 V
    • ±1/±5.5/2/11 V
    • ±15 V
    • ±18 V
    • ±2.5/±18/5/36 V
    • ±2/±15 V
    • ±2/±8/4/16 V
    • ±5 V
    • ±5,3.3 V
Package Style (Meter)
    • Chip Carrier
    • Chip Carrier, Heat Sink/Slug
    • Chip Carrier, Heat Sink/Slug, Very Thin Profile
    • Chip Carrier, Very Thin Profile
    • Cylindrical
    • Flatpack
    • Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch
    • Flatpack, Thin Profile, Fine Pitch
    • Grid Array
    • Grid Array, Fine Pitch
    • Grid Array, Very Thin Profile, Fine Pitch
    • In-Line
    • Small Outline
    • Small Outline, Heat Sink/Slug
    • Small Outline, Heat Sink/Slug, Shrink Pitch
    • Small Outline, Heat Sink/Slug, Thin Profile
    • Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch
    • Small Outline, Heat Sink/Slug, Very Thin Profile
    • Small Outline, Low Profile
    • Small Outline, Low Profile, Shrink Pitch
    • Small Outline, Shrink Pitch
    • Small Outline, Thin Profile
    • Small Outline, Thin Profile, Shrink Pitch
    • Small Outline, Very Thin Profile, Shrink Pitch
    • Small Outline, Very Think Profile
    • Uncased Chip
Package Equivalence Code
    • BGA4,2X2,14
    • BGA4,2X2,20
    • BGA6,2X3,14
    • BGA6,2X3,16
    • BGA6,2X3,20
    • BGA8,3X3,20
    • BGA9,3X3,16
    • CAN10,.23
    • CAN6/8,.2
    • CAN8,.2
    • DIE OR CHIP
    • DIP14(UNSPEC)
    • DIP14,.3
    • DIP16,.3
    • DIP20,.3
    • DIP24,.3
    • DIP4,.3
    • DIP6,.3
    • DIP8,.3
    • FL10
    • FL10,.24
    • FL10,.3
    • FL14,.3
    • FL16,.3
    • FL20,.3
    • FL5/6,.047,20
    • FL6,.047,20
    • FL6,.3
    • FL8,.25
    • LCC12,.12SQ,20
    • LCC14,.08SQ,16
    • LCC16,.12SQ,20
    • LCC16,.16SQ,20
    • LCC20,.20SQ,25
    • LCC20,.35SQ
    • LCC24,.16SQ,20
    • LCC28,.45SQ
    • LCC32,.16SQ,20
    • LCC32,.2SQ,20
    • LCC8,.06SQ,20
    • LDCC20,.4SQ
    • LDCC28,.5SQ
    • SIP7,.05
    • SIP8,.06
    • SIP9,.05
    • SIP9,.1
    • SOLCC12,.08,20
    • SOLCC6,.03,20
    • SOLCC6,.04,14
    • SOLCC6,.04,16
    • SOLCC6,.04,20
    • SOLCC6,.06,18
    • SOLCC6,.06,20
    • SOLCC6,.08,25
    • SOLCC8,.04,14
    • SOLCC8,.04,20
    • SOLCC8,.05,16
    • SOLCC8,.06,16
    • SOLCC8,.08,20
    • SOLCC8,.11,20
    • SOP10,.4
    • SOP10,.45
    • SOP14(UNSPEC)
    • SOP14,.23
    • SOP14,.24
    • SOP14,.25
    • SOP14,.3
    • SOP14,.4
    • SOP16,.25
    • SOP16,.4
    • SOP16,.45
    • SOP16,.7
    • SOP20,.4
    • SOP24,.4
    • SOP5/6,.11,37
    • SOP6,.11
    • SOP6,.11,38
    • SOP6,.24
    • SOP8,.16,51
    • SOP8,.23
    • SOP8,.24
    • SOP8,.25
    • SOP8,.3
    • SOP8,.45
    • SOT-343R
    • SSOP14,.3
    • SSOP16,.25
    • SSOP20,.25
    • SSOP24,.3
    • SSOP30,.3
    • SSOP8,.2
    • SSOP8,.25
    • SSOP8,.3
    • TO-5,8PIN,DIL
    • TSOP14,.25,25
    • TSOP20,.25,25
    • TSOP5,.08
    • TSOP5,.11,37
    • TSOP5/6,.08
    • TSOP5/6,.08,25
    • TSOP5/6,.11,37
    • TSOP5/6,.11,38
    • TSOP6,.08
    • TSOP6,.11,37
    • TSOP8,.11,25
    • TSOP8,.19
    • TSOP8,.24
    • TSSOP10,.19,20
    • TSSOP14,.12,20
    • TSSOP14,.25
    • TSSOP16,.25
    • TSSOP20,.25
    • TSSOP24,.25
    • TSSOP4/6,.08
    • TSSOP5,.08
    • TSSOP5/6,.08
    • TSSOP6,.06,20
    • TSSOP6,.08
    • TSSOP8,.1
    • TSSOP8,.11
    • TSSOP8,.12
    • TSSOP8,.12,20
    • TSSOP8,.16
    • TSSOP8,.19
    • TSSOP8,.20
    • TSSOP8,.25
    • WAFER
Sub-Category
    • Comparators
    • Operational Amplifiers
Nominal Slow Rate
    • 4 V/us
Maximum Supply Voltage Limit
    • 10 V
    • 11 V
    • 11.5 V
    • 12 V
    • 13 V
    • 13.2 V
    • 13.5 V
    • 13.6 V
    • 14 V
    • 15 V
    • 16 V
    • 16.5 V
    • 17 V
    • 18 V
    • 18.5 V
    • 19 V
    • 20 V
    • 22 V
    • 28 V
    • 3.6 V
    • 30 V
    • 32 V
    • 33 V
    • 36 V
    • 38 V
    • 4 V
    • 4.6 V
    • 40 V
    • 42 V
    • 45 V
    • 5 V
    • 5.5 V
    • 5.75 V
    • 6 V
    • 6.3 V
    • 6.5 V
    • 6.6 V
    • 7 V
    • 8 V
    • 9 V
    • 9.4 V
Terminal Pitch
    • 0 in (0 mm)
    • 0.014 in (0.35 mm)
    • 0.016 in (0.4 mm)
    • 0.018 in (0.45 mm)
    • 0.019 in (0.48 mm)
    • 0.02 in (0.5 mm)
    • 0.022 in (0.55 mm)
    • 0.025 in (0.635 mm)
    • 0.025 in (0.64 mm)
    • 0.026 in (0.65 mm)
    • 0.037 in (0.95 mm)
    • 0.038 in (0.953 mm)
    • 0.049 in (1.25 mm)
    • 0.05 in (1.27 mm)
    • 0.1 in (2.54 mm)
    • 0.115 in (2.92 mm)
Maximum Operating Temperature
    • 105 °C (221 °F)
    • 110 °C (230 °F)
    • 125 °C (257 °F)
    • 150 °C (302 °F)
    • 25 °C (77 °F)
    • 70 °C (158 °F)
    • 75 °C (167 °F)
    • 80 °C (176 °F)
    • 85 °C (185 °F)
Maximum Bias Current (IIB) @25C
    • -25 nA
    • -250 nA
    • -6 μA
    • 0.031 pA
    • 0.04 pA
    • 0.05 pA
    • 0.4 pA
    • 1 nA
    • 1 pA
    • 1 uA
    • 1.1 uA
    • 1.2 nA
    • 1.2 uA
    • 1.25 uA
    • 1.8 uA
    • 10 nA
    • 10 pA
    • 10 uA
    • 100 nA
    • 100 pA
    • 100 uA
    • 110 nA
    • 13 uA
    • 130 nA
    • 15 nA
    • 15 uA
    • 150 nA
    • 16 uA
    • 160 nA
    • 2 nA
    • 2 pA
    • 2 uA
    • 2.5 uA
    • 20 nA
    • 20 pA
    • 20 uA
    • 200 nA
    • 220 nA
    • 25 nA
    • 25 uA
    • 250 nA
    • 250 pA
    • 3 nA
    • 3 uA
    • 3.5 uA
    • 3.8 uA
    • 30 nA
    • 30 pA
    • 30 uA
    • 300 nA
    • 300 pA
    • 320 nA
    • 33 uA
    • 350 nA
    • 4 pA
    • 40 nA
    • 40 pA
    • 40 uA
    • 400 nA
    • 42 uA
    • 475 nA
    • 5 nA
    • 5 pA
    • 5 uA
    • 50 nA
    • 50 pA
    • 50 uA
    • 500 nA
    • 500 pA
    • 55 uA
    • 6 uA
    • 60 nA
    • 600 nA
    • 600 pA
    • 600 uA
    • 7.5 uA
    • 700 nA
    • 75 nA
    • 75 uA
    • 8 uA
    • 80 nA
    • 80 pA
    • 800 nA
    • 900 nA
    • 950 nA
Maximum Common Mode Voltage
    • 26 V
    • 36 V
Nominal Response Time
    • .83 ns
    • 0.085 ns
    • 0.088 ns
    • 0.1 ns
    • 0.135 ns
    • 0.165 ns
    • 0.18 ns
    • 0.225 ns
    • 0.27 ns
    • 0.28 ns
    • 0.29 ns
    • 0.3 ns
    • 0.375 ns
    • 0.5 ns
    • 0.7 ns
    • 0.74 ns
    • 0.783 ns
    • 0.8 ns
    • 1 µs
    • 1.1 µs
    • 1.2 ns
    • 1.2 µs
    • 1.3 ms
    • 1.3 ns
    • 1.3 µs
    • 1.4 µs
    • 1.5 ns
    • 1.5 µs
    • 1.6 ns
    • 1.6 µs
    • 1.7 ns
    • 1.7 µs
    • 1.75 µs
    • 1.8 ns
    • 1.8 µs
    • 10 ns
    • 10 µs
    • 100 ns
    • 100 µs
    • 11 ns
    • 110 ns
    • 115 ns
    • 12 ns
    • 12 µs
    • 12.2 µs
    • 120 ns
    • 120 µs
    • 125 ns
    • 13.5 µs
    • 14 ns
    • 14 µs
    • 14.8 µs
    • 15 ns
    • 15 µs
    • 150 ns
    • 150 µs
    • 16 ns
    • 16 µs
    • 160 ns
    • 165 ns
    • 17 µs
    • 170 ns
    • 175 µs
    • 18 ns
    • 18 µs
    • 180 ns
    • 190 ns
    • 2 ns
    • 2 µs
    • 2.1 ns
    • 2.1 µs
    • 2.2 ns
    • 2.3 µs
    • 2.4 ns
    • 2.4 µs
    • 2.5 ns
    • 2.5 µs
    • 2.7 ns
    • 2.7 µs
    • 2.9 ns
    • 2.9 µs
    • 20 ns
    • 20 µs
    • 200 ns
    • 210 ns
    • 22 µs
    • 220 ns
    • 220 µs
    • 225 ns
    • 228 ns
    • 230 ns
    • 24 ns
    • 24 µs
    • 240 ns
    • 240 µs
    • 25 ns
    • 25 µs
    • 250 ns
    • 26 ns
    • 260 ns
    • 28 ns
    • 28 µs
    • 28.1 µs
    • 280 ns
    • 29 µs
    • 290 ns
    • 3 ns
    • 3 µs
    • 3.5 ns
    • 3.5 µs
    • 3.63 ns
    • 30 ns
    • 300 ns
    • 300 µs
    • 31 µs
    • 310 ns
    • 33 ns
    • 35 µs
    • 350 ns
    • 360 ns
    • 365 ns
    • 39 ns
    • 39 µs
    • 4 ns
    • 4 µs
    • 4.5 ns
    • 4.5 µs
    • 4.85 µs
    • 4.9 µs
    • 4.94 µs
    • 40 ns
    • 40 µs
    • 400 ns
    • 410 ns
    • 42 ns
    • 420 ns
    • 440 ns
    • 45 ns
    • 45 µs
    • 450 ns
    • 47 ns
    • 5 ns
    • 5 µs
    • 5.5 ns
    • 5.5 µs
    • 5.6 µs
    • 50 ns
    • 50 µs
    • 500 ns
    • 55 µs
    • 550 ns
    • 56 ns
    • 560 ns
    • 57 ns
    • 580 ns
    • 6 ns
    • 6 µs
    • 6.2 ns
    • 6.5 ns
    • 60 ns
    • 600 ns
    • 640 ns
    • 65 ns
    • 650 ns
    • 650 µs
    • 68 ns
    • 7 ns
    • 7 µs
    • 7.5 ns
    • 7.7 µs
    • 7.8 µs
    • 70 µs
    • 700 ns
    • 730 ns
    • 75 ns
    • 750 ns
    • 8 ns
    • 8 µs
    • 8.1 ns
    • 8.5 ns
    • 8.8 ns
    • 80 ns
    • 80 µs
    • 800 ns
    • 85 ns
    • 850 ns
    • 860 ns
    • 89 ns
    • 9 ns
    • 9.5 ns
    • 9.6 ns
    • 9.7 µs
    • 9.9 ns
    • 9.9 µs
    • 90 ns
    • 900 ns
    • 92 ns
    • 940 µs
    • 95 µs
Output Type
    • 3-State
    • Open-Collector
    • Open-Collector, Open-Drain
    • Open-Collector, Open-Emitter
    • Open-Drain
    • Open-Drain, Push-Pull
    • Open-Drain, Totem Pole
    • Open-Emitter
    • Push-Pull
    • Totem Pole
Minimum Operating Temperature
    • -20 °C (-4 °F)
    • -25 °C (-13 °F)
    • -30 °C (-22 °F)
    • -40 °C (-40 °F)
    • -55 °C (-67 °F)
    • 0 °C (32 °F)
    • 25 °C (77 °F)
Terminal Finish
    • Gold
    • Gold Over Nickel
    • Matte Tin
    • Matte Tin - annealed
    • Nickel Gold
    • Nickel Gold Palladium
    • Nickel Gold Palladium Silver
    • Nickel Palladium
    • Nickel Palladium Gold
    • Nickel Palladium Gold Silver
    • Nickel/Palladium/Gold
    • Nickel/Palladium/Gold/Silver
    • Palladium
    • Pure Tin
    • Tin
    • Tin Bismuth
    • Tin Copper
    • Tin Lead
    • Tin Lead Over Silver
    • Tin Silver Copper
    • Tin Silver Copper Nickel
    • Tin/Copper
    • Tin/Lead
    • Tin/Lead (Sn63Pb37)
    • Tin/Lead (Sn85Pb15)
    • Tin/Lead (Sn85Pb15) - with Silver barrier
    • Tin/Lead - hot dipped
    • Tin/Nickel Palladium Gold
    • Tin/Silver/Copper
    • Tin/Silver/Copper/Nickel
Terminal Position
    • Bottom
    • Dual
    • Quad
    • Single
    • Upper
JESD-30 Code
    • O-MBCY-P8
    • O-MBCY-T10
    • O-MBCY-W10
    • O-MBCY-W20
    • O-MBCY-W6
    • O-MBCY-W8
    • O-MBCY-X10
    • O-MBCY-X8
    • O-XBCY-W10
    • O-XBCY-W8
    • O-XBCY-X8
    • R-CDFP-F10
    • R-CDFP-F14
    • R-CDFP-F16
    • R-CDFP-F20
    • R-CDIP-P8
    • R-CDIP-T14
    • R-CDIP-T16
    • R-CDIP-T8
    • R-CDSO-G10
    • R-CDSO-G14
    • R-CDSO-G16
    • R-CDSO-G8
    • R-GDFP-F10
    • R-GDFP-F14
    • R-GDFP-F16
    • R-GDIP-T14
    • R-GDIP-T16
    • R-GDIP-T20
    • R-GDIP-T24
    • R-GDIP-T8
    • R-GDSO-G10
    • R-GDSO-G14
    • R-PBCC-B8
    • R-PBGA-B6
    • R-PBGA-B9
    • R-PDFP-F10
    • R-PDFP-F14
    • R-PDFP-F5
    • R-PDFP-F6
    • R-PDIP-P14
    • R-PDIP-T
    • R-PDIP-T14
    • R-PDIP-T16
    • R-PDIP-T18
    • R-PDIP-T20
    • R-PDIP-T24
    • R-PDIP-T4
    • R-PDIP-T6
    • R-PDIP-T8
    • R-PDSO-F5
    • R-PDSO-G10
    • R-PDSO-G14
    • R-PDSO-G16
    • R-PDSO-G18
    • R-PDSO-G20
    • R-PDSO-G24
    • R-PDSO-G30
    • R-PDSO-G4
    • R-PDSO-G5
    • R-PDSO-G6
    • R-PDSO-G8
    • R-PDSO-N12
    • R-PDSO-N16
    • R-PDSO-N4
    • R-PDSO-N6
    • R-PDSO-N8
    • R-PSIP-T7
    • R-PSIP-T8
    • R-PSIP-T9
    • R-XBCC-B6
    • R-XBGA-B6
    • R-XDFP-F10
    • R-XDFP-F14
    • R-XDFP-F20
    • R-XDIP-T14
    • R-XDIP-T16
    • R-XDIP-T20
    • R-XDIP-T8
    • R-XDSO-G10
    • R-XDSO-G14
    • R-XDSO-G8
    • R-XDSO-N6
    • R-XUUC-N
    • R-XUUC-N10
    • R-XUUC-N13
    • R-XUUC-N14
    • R-XUUC-N15
    • R-XUUC-N16
    • R-XUUC-N20
    • R-XUUC-N23
    • R-XUUC-N24
    • R-XUUC-N25
    • R-XUUC-N5
    • R-XUUC-N6
    • R-XUUC-N7
    • R-XUUC-N8
    • R-XUUC-N9
    • S-CDFP-F8
    • S-CDSO-G16
    • S-CDSO-G8
    • S-CQCC-N14
    • S-CQCC-N16
    • S-CQCC-N20
    • S-GDFP-F10
    • S-PBCC-B5
    • S-PBCC-B8
    • S-PBGA-B4
    • S-PBGA-B8
    • S-PBGA-B9
    • S-PDFP-F8
    • S-PDSO-G10
    • S-PDSO-G8
    • S-PDSO-N10
    • S-PDSO-N3
    • S-PDSO-N6
    • S-PDSO-N8
    • S-PQCC-J20
    • S-PQCC-J28
    • S-PQCC-N12
    • S-PQCC-N14
    • S-PQCC-N16
    • S-PQCC-N20
    • S-PQCC-N24
    • S-PQCC-N36
    • S-PQCC-N8
    • S-PQFP-G100
    • S-PQFP-G64
    • S-PQFP-G80
    • S-XBCC-B6
    • S-XBCC-B8
    • S-XBGA-B4
    • S-XBGA-B8
    • S-XDFP-F8
    • S-XDSO-N8
    • S-XQCC-N12
    • S-XQCC-N16
    • S-XQCC-N20
    • S-XQCC-N24
    • S-XQCC-N28
    • S-XQCC-N32
    • X-XUUC-N
    • X-XUUC-N14
    • X-XUUC-N20
    • X-XUUC-N5
    • X-XUUC-N8
Moisture Sensitivity Level (MSL)
    • 1
    • 2
    • 2A
    • 3
Maximum Seated Height
    • 0.011 in (0.28 mm)
    • 0.014 in (0.35 mm)
    • 0.016 in (0.4 mm)
    • 0.02 in (0.5 mm)
    • 0.022 in (0.55 mm)
    • 0.022 in (0.57 mm)
    • 0.023 in (0.59 mm)
    • 0.024 in (0.6 mm)
    • 0.024 in (0.605 mm)
    • 0.026 in (0.65 mm)
    • 0.026 in (0.67 mm)
    • 0.027 in (0.675 mm)
    • 0.027 in (0.69 mm)
    • 0.031 in (0.8 mm)
    • 0.033 in (0.85 mm)
    • 0.035 in (0.9 mm)
    • 0.036 in (0.92 mm)
    • 0.039 in (1 mm)
    • 0.041 in (1.03 mm)
    • 0.041 in (1.05 mm)
    • 0.042 in (1.07 mm)
    • 0.043 in (1.09 mm)
    • 0.043 in (1.1 mm)
    • 0.046 in (1.17 mm)
    • 0.047 in (1.19 mm)
    • 0.047 in (1.2 mm)
    • 0.048 in (1.22 mm)
    • 0.049 in (1.25 mm)
    • 0.051 in (1.3 mm)
    • 0.052 in (1.31 mm)
    • 0.053 in (1.35 mm)
    • 0.055 in (1.4 mm)
    • 0.057 in (1.45 mm)
    • 0.059 in (1.5 mm)
    • 0.061 in (1.55 mm)
    • 0.063 in (1.6 mm)
    • 0.067 in (1.71 mm)
    • 0.068 in (1.727 mm)
    • 0.068 in (1.73 mm)
    • 0.069 in (1.75 mm)
    • 0.069 in (1.752 mm)
    • 0.069 in (1.7526 mm)
    • 0.069 in (1.753 mm)
    • 0.071 in (1.8 mm)
    • 0.073 in (1.85 mm)
    • 0.073 in (1.86 mm)
    • 0.075 in (1.9 mm)
    • 0.075 in (1.905 mm)
    • 0.075 in (1.91 mm)
    • 0.077 in (1.95 mm)
    • 0.077 in (1.96 mm)
    • 0.079 in (2 mm)
    • 0.08 in (2.02 mm)
    • 0.08 in (2.03 mm)
    • 0.08 in (2.032 mm)
    • 0.083 in (2.1 mm)
    • 0.085 in (2.159 mm)
    • 0.087 in (2.2 mm)
    • 0.09 in (2.29 mm)
    • 0.092 in (2.33 mm)
    • 0.098 in (2.49 mm)
    • 0.1 in (2.54 mm)
    • 0.102 in (2.59 mm)
    • 0.103 in (2.62 mm)
    • 0.104 in (2.64 mm)
    • 0.104 in (2.642 mm)
    • 0.104 in (2.65 mm)
    • 0.11 in (2.8 mm)
    • 0.115 in (2.92 mm)
    • 0.133 in (3.38 mm)
    • 0.146 in (3.7 mm)
    • 0.15 in (3.809 mm)
    • 0.155 in (3.937 mm)
    • 0.16 in (4.06 mm)
    • 0.165 in (4.2 mm)
    • 0.167 in (4.25 mm)
    • 0.17 in (4.31 mm)
    • 0.173 in (4.39 mm)
    • 0.173 in (4.4 mm)
    • 0.175 in (4.44 mm)
    • 0.175 in (4.45 mm)
    • 0.177 in (4.5 mm)
    • 0.179 in (4.55 mm)
    • 0.18 in (4.57 mm)
    • 0.18 in (4.572 mm)
    • 0.185 in (4.69 mm)
    • 0.185 in (4.7 mm)
    • 0.189 in (4.8 mm)
    • 0.199 in (5.06 mm)
    • 0.2 in (5.08 mm)
    • 0.201 in (5.1 mm)
    • 0.21 in (5.33 mm)
    • 0.21 in (5.334 mm)
    • 0.225 in (5.72 mm)
    • 0.287 in (7.3 mm)
    • 0.311 in (7.9 mm)
    • 0.327 in (8.3 mm)
Width
    • 0.028 in (0.7 mm)
    • 0.029 in (0.727 mm)
    • 0.029 in (0.728 mm)
    • 0.029 in (0.73 mm)
    • 0.031 in (0.8 mm)
    • 0.032 in (0.818 mm)
    • 0.033 in (0.8382 mm)
    • 0.039 in (1 mm)
    • 0.04 in (1.009 mm)
    • 0.041 in (1.05 mm)
    • 0.046 in (1.16 mm)
    • 0.047 in (1.2 mm)
    • 0.049 in (1.25 mm)
    • 0.05 in (1.26 mm)
    • 0.051 in (1.3 mm)
    • 0.053 in (1.35 mm)
    • 0.058 in (1.47 mm)
    • 0.059 in (1.5 mm)
    • 0.06 in (1.514 mm)
    • 0.061 in (1.55 mm)
    • 0.063 in (1.6 mm)
    • 0.064 in (1.625 mm)
    • 0.065 in (1.65 mm)
    • 0.069 in (1.75 mm)
    • 0.079 in (2 mm)
    • 0.1 in (2.55 mm)
    • 0.11 in (2.8 mm)
    • 0.114 in (2.9 mm)
    • 0.118 in (3 mm)
    • 0.119 in (3.025 mm)
    • 0.126 in (3.2 mm)
    • 0.153 in (3.895 mm)
    • 0.154 in (3.899 mm)
    • 0.154 in (3.9 mm)
    • 0.154 in (3.91 mm)
    • 0.154 in (3.9116 mm)
    • 0.156 in (3.95 mm)
    • 0.156 in (3.975 mm)
    • 0.157 in (4 mm)
    • 0.173 in (4.4 mm)
    • 0.197 in (5 mm)
    • 0.209 in (5.3 mm)
    • 0.217 in (5.5 mm)
    • 0.23 in (5.85 mm)
    • 0.235 in (5.97 mm)
    • 0.236 in (6 mm)
    • 0.241 in (6.12 mm)
    • 0.241 in (6.1214 mm)
    • 0.245 in (6.225 mm)
    • 0.247 in (6.285 mm)
    • 0.248 in (6.2865 mm)
    • 0.248 in (6.29 mm)
    • 0.248 in (6.3 mm)
    • 0.25 in (6.35 mm)
    • 0.255 in (6.475 mm)
    • 0.255 in (6.48 mm)
    • 0.256 in (6.5 mm)
    • 0.263 in (6.67 mm)
    • 0.27 in (6.858 mm)
    • 0.272 in (6.92 mm)
    • 0.28 in (7.11 mm)
    • 0.295 in (7.493 mm)
    • 0.295 in (7.5 mm)
    • 0.3 in (7.62 mm)
    • 0.35 in (8.89 mm)
    • 0.352 in (8.93 mm)
    • 0.353 in (8.96 mm)
    • 0.353 in (8.965 mm)
    • 0.353 in (8.9662 mm)
    • 0.357 in (9.08 mm)
    • 0.394 in (10 mm)
    • 0.45 in (11.43 mm)
    • 0.453 in (11.505 mm)
    • 0.472 in (12 mm)
    • 0.551 in (14 mm)
Qualification
    • No
    • Yes
Nominal Bandwidth (3dB)
    • 1.25 MHz
    • 1.6 MHz
    • 4.4 MHz
JESD-609 Code
    • e0
    • e1
    • e2
    • e3
    • e3/e4
    • e4
    • e6
Maximum Time At Peak Reflow Temperature (s)
    • 10 s
    • 20 s
    • 30 s
    • 40
Peak Reflow Temperature (C)
    • 220 °C (428 °F)
    • 225 °C (437 °F)
    • 235 °C (455 °F)
    • 240 °C (464 °F)
    • 245 °C (473 °F)
    • 250 °C (482 °F)
    • 255 °C (491 °F)
    • 260 °C (500 °F)
Length
    • 0.024 in (0.6 mm)
    • 0.028 in (0.7 mm)
    • 0.029 in (0.728 mm)
    • 0.029 in (0.73 mm)
    • 0.031 in (0.8 mm)
    • 0.034 in (0.8636 mm)
    • 0.039 in (1 mm)
    • 0.04 in (1.009 mm)
    • 0.042 in (1.077 mm)
    • 0.047 in (1.2 mm)
    • 0.048 in (1.218 mm)
    • 0.05 in (1.26 mm)
    • 0.051 in (1.3 mm)
    • 0.053 in (1.35 mm)
    • 0.055 in (1.4 mm)
    • 0.057 in (1.45 mm)
    • 0.059 in (1.5 mm)
    • 0.06 in (1.514 mm)
    • 0.06 in (1.52 mm)
    • 0.061 in (1.55 mm)
    • 0.062 in (1.57 mm)
    • 0.063 in (1.6 mm)
    • 0.067 in (1.7 mm)
    • 0.071 in (1.8 mm)
    • 0.077 in (1.95 mm)
    • 0.078 in (1.98 mm)
    • 0.079 in (2 mm)
    • 0.08 in (2.02 mm)
    • 0.081 in (2.05 mm)
    • 0.083 in (2.1 mm)
    • 0.085 in (2.15 mm)
    • 0.087 in (2.2 mm)
    • 0.091 in (2.3 mm)
    • 0.114 in (2.9 mm)
    • 0.115 in (2.92 mm)
    • 0.116 in (2.95 mm)
    • 0.117 in (2.97 mm)
    • 0.118 in (3 mm)
    • 0.154 in (3.9 mm)
    • 0.157 in (4 mm)
    • 0.165 in (4.2 mm)
    • 0.173 in (4.4 mm)
    • 0.174 in (4.425 mm)
    • 0.191 in (4.85 mm)
    • 0.192 in (4.889 mm)
    • 0.193 in (4.8895 mm)
    • 0.193 in (4.89 mm)
    • 0.193 in (4.9 mm)
    • 0.193 in (4.902 mm)
    • 0.193 in (4.9022 mm)
    • 0.193 in (4.9025 mm)
    • 0.193 in (4.905 mm)
    • 0.194 in (4.92 mm)
    • 0.195 in (4.96 mm)
    • 0.197 in (5 mm)
    • 0.199 in (5.05 mm)
    • 0.205 in (5.2 mm)
    • 0.209 in (5.3 mm)
    • 0.236 in (6 mm)
    • 0.241 in (6.1214 mm)
    • 0.244 in (6.2 mm)
    • 0.245 in (6.225 mm)
    • 0.255 in (6.475 mm)
    • 0.255 in (6.48 mm)
    • 0.256 in (6.5 mm)
    • 0.27 in (6.85 mm)
    • 0.27 in (6.858 mm)
    • 0.27 in (6.86 mm)
    • 0.28 in (7.11 mm)
    • 0.29 in (7.37 mm)
    • 0.295 in (7.5 mm)
    • 0.3 in (7.62 mm)
    • 0.307 in (7.8 mm)
    • 0.337 in (8.56 mm)
    • 0.34 in (8.6235 mm)
    • 0.34 in (8.635 mm)
    • 0.34 in (8.64 mm)
    • 0.341 in (8.65 mm)
    • 0.341 in (8.66 mm)
    • 0.341 in (8.6614 mm)
    • 0.343 in (8.7 mm)
    • 0.344 in (8.725 mm)
    • 0.35 in (8.89 mm)
    • 0.35 in (8.9 mm)
    • 0.352 in (8.93 mm)
    • 0.353 in (8.96 mm)
    • 0.353 in (8.965 mm)
    • 0.353 in (8.9662 mm)
    • 0.357 in (9.08 mm)
    • 0.362 in (9.2 mm)
    • 0.363 in (9.21 mm)
    • 0.365 in (9.27 mm)
    • 0.365 in (9.271 mm)
    • 0.365 in (9.275 mm)
    • 0.366 in (9.3 mm)
    • 0.369 in (9.375 mm)
    • 0.371 in (9.425 mm)
    • 0.374 in (9.5 mm)
    • 0.377 in (9.58 mm)
    • 0.377 in (9.584 mm)
    • 0.378 in (9.59 mm)
    • 0.378 in (9.6 mm)
    • 0.38 in (9.652 mm)
    • 0.385 in (9.779 mm)
    • 0.385 in (9.78 mm)
    • 0.386 in (9.8 mm)
    • 0.386 in (9.805 mm)
    • 0.386 in (9.81 mm)
    • 0.386 in (9.817 mm)
    • 0.389 in (9.88 mm)
    • 0.39 in (9.9 mm)
    • 0.39 in (9.902 mm)
    • 0.39 in (9.906 mm)
    • 0.39 in (9.91 mm)
    • 0.392 in (9.955 mm)
    • 0.394 in (10 mm)
    • 0.396 in (10.06 mm)
    • 0.398 in (10.1 mm)
    • 0.398 in (10.11 mm)
    • 0.4 in (10.16 mm)
    • 0.402 in (10.2 mm)
    • 0.405 in (10.287 mm)
    • 0.406 in (10.3 mm)
    • 0.45 in (11.43 mm)
    • 0.453 in (11.505 mm)
    • 0.455 in (11.55 mm)
    • 0.472 in (12 mm)
    • 0.504 in (12.8 mm)
    • 0.54 in (13.72 mm)
    • 0.551 in (14 mm)
    • 0.677 in (17.2 mm)
    • 0.728 in (18.48 mm)
    • 0.743 in (18.86 mm)
    • 0.748 in (19 mm)
    • 0.749 in (19.025 mm)
    • 0.75 in (19.05 mm)
    • 0.755 in (19.17 mm)
    • 0.755 in (19.175 mm)
    • 0.755 in (19.177 mm)
    • 0.755 in (19.18 mm)
    • 0.756 in (19.2 mm)
    • 0.757 in (19.22 mm)
    • 0.758 in (19.25 mm)
    • 0.76 in (19.304 mm)
    • 0.76 in (19.305 mm)
    • 0.764 in (19.4 mm)
    • 0.765 in (19.43 mm)
    • 0.768 in (19.495 mm)
    • 0.769 in (19.535 mm)
    • 0.77 in (19.558 mm)
    • 0.77 in (19.56 mm)
    • 0.783 in (19.9 mm)
    • 0.785 in (19.939 mm)
    • 0.785 in (19.94 mm)
    • 0.787 in (20 mm)
    • 0.79 in (20.07 mm)
    • 0.793 in (20.13 mm)
    • 0.84 in (21.34 mm)
    • 0.856 in (21.755 mm)
    • 0.86 in (21.84 mm)
    • 0.877 in (22.28 mm)
    • 0.992 in (25.2 mm)
    • 1.03 in (26.16 mm)
    • 2.083 in (52.9 mm)
Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

MAX9119EXK

Maxim Integrated

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

10 mV

Yes

1

1.2 μA

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

0.025 in (0.635 mm)

85 °C (185 °F)

2 nA

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

No

e0

MAX9120EXK

Maxim Integrated

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

10 mV

Yes

1

1.2 μA

2/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

0.025 in (0.635 mm)

85 °C (185 °F)

2 nA

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

No

e0

MAX9120ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

1

1.2 μA

2/5 V

Small Outline

SOP8,.25

Comparators

0.05 in (1.27 mm)

85 °C (185 °F)

2 nA

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G8

No

e0

MAX9141EKA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

4.5 mV

Yes

1

BIPOLAR

320 μA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.1

Comparators

0.025 in (0.635 mm)

85 °C (185 °F)

320 nA

-40 °C (-40 °F)

Dual

R-PDSO-G8

No

MAX9032AKA

Maxim Integrated

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

5 mV

Yes

2

55 μA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.1

Comparators

0.025 in (0.635 mm)

125 °C (257 °F)

80 nA

20 ns

-40 °C (-40 °F)

Dual

R-PDSO-G8

No

MAX9051AEUT

Maxim Integrated

Comparator

Industrial

Gull Wing

6

TSOP

Rectangular

Plastic/Epoxy

7 mV

Yes

1

BIPOLAR

72 μA

3/5 V

Small Outline, Thin Profile

TSOP6,.11,37

Comparators

0.037 in (0.95 mm)

85 °C (185 °F)

10 nA

450 ns

-40 °C (-40 °F)

Dual

R-PDSO-G6

No

MAX9030AXT

Maxim Integrated

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

Yes

55 μA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

0.025 in (0.635 mm)

125 °C (257 °F)

80 nA

-40 °C (-40 °F)

Dual

R-PDSO-G6

1

No

MAX9120ESA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

2 nA

Yes

1

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

45 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e0

0.193 in (4.9 mm)

MAX921CSA-TG077

Maxim Integrated

Comparator

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

1

4 μA

3 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

14 µs

0 °C (32 °F)

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

MAX905CPD

Maxim Integrated

Comparator

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

-6 V

1.5 mV

10 uA

No

1

24 mA

-5 V

5 V

5/GND,-5/-5.2 V

In-Line

DIP14,.3

Comparators

6 V

0.1 in (2.54 mm)

70 °C (158 °F)

10 uA

2 ns

0 °C (32 °F)

Tin/Lead

Dual

R-PDIP-T14

0.225 in (5.72 mm)

0.3 in (7.62 mm)

No

e0

MAX906CPE

Maxim Integrated

Comparator

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

-6 V

2.5 mV

10 uA

No

1

48 mA

-5 V

5 V

5/GND,-5/-5.2 V

In-Line

DIP16,.3

Comparators

6 V

0.1 in (2.54 mm)

70 °C (158 °F)

10 uA

2 ns

0 °C (32 °F)

Tin/Lead

Dual

R-PDIP-T16

0.225 in (5.72 mm)

0.3 in (7.62 mm)

No

e0

MAX971CPA

Maxim Integrated

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

10 mV

No

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.18 in (4.572 mm)

No

e0

245 °C (473 °F)

0.369 in (9.375 mm)

MAX971EPA

Maxim Integrated

Comparator

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

10 mV

No

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.18 in (4.572 mm)

No

e0

245 °C (473 °F)

0.369 in (9.375 mm)

MAX971CSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX971ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX971CUA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Square

Plastic/Epoxy

0 V

10 mV

Yes

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

TSSOP8,.19

Comparators

12 V

0.025 in (0.635 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

No

e0

MAX972CPA

Maxim Integrated

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

10 mV

No

2

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.18 in (4.572 mm)

No

e0

0.369 in (9.375 mm)

MAX972EPA

Maxim Integrated

Comparator

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

10 mV

No

2

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

0.369 in (9.375 mm)

MAX972CSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

2

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX972ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

2

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX972CUA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Square

Plastic/Epoxy

0 V

10 mV

Yes

2

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

TSSOP8,.19

Comparators

12 V

0.025 in (0.635 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

No

e0

MAX973CSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

20 s

240 °C (464 °F)

MAX973ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX974EPE

Maxim Integrated

Comparator

Industrial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

0 V

10 mV

No

4

8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T16

1

0.225 in (5.72 mm)

0.3 in (7.62 mm)

No

e0

245 °C (473 °F)

MAX974ESE

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

4

8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

No

e0

20 s

240 °C (464 °F)

MAX981EPA

Maxim Integrated

Comparator

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

10 mV

No

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

0.369 in (9.375 mm)

MAX981ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX981CUA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Square

Plastic/Epoxy

0 V

10 mV

Yes

1

3.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

TSSOP8,.19

Comparators

12 V

0.025 in (0.635 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

No

e0

MAX982CPA

Maxim Integrated

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

10 mV

No

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.18 in (4.572 mm)

No

e0

245 °C (473 °F)

0.369 in (9.375 mm)

MAX982EPA

Maxim Integrated

Comparator

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

0 V

10 mV

No

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

245 °C (473 °F)

0.369 in (9.375 mm)

MAX982CSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX982ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

20 s

240 °C (464 °F)

MAX982CUA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Square

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

TSSOP8,.19

Comparators

12 V

0.025 in (0.635 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

No

e0

MAX983CSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX983ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

No

e0

MAX983CUA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Square

Plastic/Epoxy

0 V

10 mV

Yes

2

5.8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

TSSOP8,.19

Comparators

12 V

0.025 in (0.635 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

S-PDSO-G8

1

No

e0

MAX984EPE

Maxim Integrated

Comparator

Industrial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

0 V

10 mV

No

4

8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

In-Line

DIP8,.3

Comparators

12 V

0.1 in (2.54 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T16

1

0.225 in (5.72 mm)

0.3 in (7.62 mm)

No

e0

MAX984CSE

Maxim Integrated

Comparator

Commercial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

4

8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 µs

Open-Drain

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

1

No

e0

MAX984ESE

Maxim Integrated

Comparator

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

0 V

10 mV

Yes

4

8 μA

0 V

3 V

±1.25/±5.5/2.5/11 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

No

e0

MAX976ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3 mV

300 nA

Yes

2

CMOS

1.3 mA

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 nA

28 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

240 °C (464 °F)

0.193 in (4.9 mm)

MAX976EUA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

3 mV

300 nA

Yes

2

CMOS

1.3 mA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

300 nA

28 ns

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

20 s

240 °C (464 °F)

0.118 in (3 mm)

MAX998EUT-T

Maxim Integrated

Comparator

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

3 mV

300 nA

Yes

1

CMOS

650 μA

5 V

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

300 nA

28 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

20 s

240 °C (464 °F)

0.114 in (2.9 mm)

MAX998ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3 mV

300 nA

Yes

1

CMOS

650 μA

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 nA

28 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX907C/D

Maxim Integrated

Comparator

Commercial

No Lead

8

DIE

Rectangular

2 mV

300 nA

Yes

2

CMOS

2 mA

5 V

5 V

Uncased Chip

DIE OR CHIP

Comparators

14 V

70 °C (158 °F)

300 nA

30 ns

0 °C (32 °F)

Tin Lead

Upper

R-XUUC-N8

1

No

e0

MAX907CPA

Maxim Integrated

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

3.5 mV

500 nA

No

2

BIPOLAR

1.2 mA

5 V

5 V

In-Line

DIP8,.3

Comparators

6 V

0.1 in (2.54 mm)

70 °C (158 °F)

300 nA

45 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

0.369 in (9.375 mm)

MAX907CSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3.5 mV

500 nA

Yes

2

BIPOLAR

1.2 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 nA

45 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

240 °C (464 °F)

0.193 in (4.9 mm)

MAX907EPA

Maxim Integrated

Comparator

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

3.5 mV

500 nA

No

2

BIPOLAR

1.2 mA

5 V

5 V

In-Line

DIP8,.3

Comparators

6 V

0.1 in (2.54 mm)

85 °C (185 °F)

300 nA

45 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T8

1

0.18 in (4.572 mm)

0.3 in (7.62 mm)

No

e0

245 °C (473 °F)

0.369 in (9.375 mm)

MAX907ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3.5 mV

500 nA

Yes

2

BIPOLAR

1.2 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 nA

45 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.193 in (4.9 mm)
Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.