LSSOP Operational Amplifiers (Op Amps) 409

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Low-Bias Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Minimum Output Current Nominal Bandwidth (3dB) Micropower JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Wideband Power

PLPV811DBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

8 kHz

370 uV

Yes

1

CMOS

95 dB

1.8 V

Small Outline, Low Profile, Shrink Pitch

Operational Amplifiers

2000 V/us

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

OPA170AQDBVRQ1

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1.2 MHz

-20 V

2000 uV

3.5 nA

Yes

1

AEC-Q100

120 dB

-2 V

2 V

Small Outline, Low Profile, Shrink Pitch

Operational Amplifiers

0.4 V/us

20 V

0.037 in (0.95 mm)

125 °C (257 °F)

15 pA

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

3

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

0.114 in (2.9 mm)

TLV316QDBVTQ1

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

10 MHz

4500 uV

Yes

1

72 dB

CMOS

AEC-Q100

75 dB

575 mA

5 V

Small Outline, Low Profile, Shrink Pitch

Operational Amplifiers

6 V/us

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADA4622-1ARJZ-RL

Analog Devices

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 MHz

-18 V

2000 uV

1.5 nA

Yes

1

100 dB

-15 V

Tape And Reel

15 V

Small Outline, Low Profile, Shrink Pitch

Operational Amplifiers

23 V/us

18 V

0.037 in (0.95 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

HPA00215EA/3K

Texas Instruments

Operational Amplifier

Military

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

70 kHz

13000 uV

10 pA

Yes

2

48 dB

CMOS

60 dB

4 μA

5 V

Small Outline, Low Profile, Shrink Pitch

Operational Amplifiers

0.02 V/us

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

10 pA

-55 °C (-67 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

HPA00779NA/3K

Texas Instruments

Operational Amplifier

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

100 kHz

500 uV

10 pA

Yes

1

80 dB

CMOS

86 dB

32 μA

5 V

Small Outline, Low Profile, Shrink Pitch

Operational Amplifiers

0.03 V/us

7.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

10 pA

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

HPA02230AIDBVR

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

2000 uV

16 uA

Yes

1

100 dB

94 dB

12 V

Small Outline, Low Profile, Shrink Pitch

Operational Amplifiers

1 V/us

18 V

0.037 in (0.95 mm)

125 °C (257 °F)

80 V

-40 °C (-40 °F)

Nickel/Palladium/Gold

50

Dual

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MCP601T-E/OTVAO

Microchip Technology

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

2.8 MHz

Yes

4500 uV

5 nA

Yes

1

75 dB

CMOS

AEC-Q100; TS 16949

90 dB

325 μA

Voltage Feedback

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Operational Amplifiers

2.3 V/us

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

Yes

56200

-40 °C (-40 °F)

Matte Tin - annealed

Dual

No

R-PDSO-G5

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

Yes

e3

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

MCP6021T-E/OTVAO

Microchip Technology

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

10 MHz

Yes

2500 uV

5 nA

Yes

1

74 dB

CMOS

AEC-Q100; TS 16949

90 dB

1.35 mA

Voltage Feedback

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Operational Amplifiers

7 V/us

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

Yes

31620

-40 °C (-40 °F)

Matte Tin - annealed

Dual

No

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.63 mm)

No

e3

260 °C (500 °F)

0.116 in (2.95 mm)

No

No

INA281A5IDBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1.269 MHz

No

150 uV

30 uA

Yes

1

120 dB

140 dB

2.25 mA

Current Feedback

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Operational Amplifiers

2.5 V/us

22 V

0.037 in (0.95 mm)

125 °C (257 °F)

30 uA

110 V

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

No

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

INA281A3IDBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1.41 MHz

No

150 uV

30 uA

Yes

1

120 dB

140 dB

2.25 mA

Current Feedback

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Operational Amplifiers

2.5 V/us

22 V

0.037 in (0.95 mm)

125 °C (257 °F)

30 uA

110 V

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

No

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

INA281B4IDBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1.269 MHz

No

150 uV

30 uA

Yes

1

120 dB

140 dB

2.25 mA

Transconductance

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Operational Amplifiers

2.5 V/us

22 V

0.037 in (0.95 mm)

125 °C (257 °F)

30 uA

110 V

No

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

No

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

INA281B3IDBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1.41 MHz

No

150 uV

30 uA

Yes

1

120 dB

140 dB

2.25 mA

Transconductance

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Operational Amplifiers

2.5 V/us

22 V

0.037 in (0.95 mm)

125 °C (257 °F)

30 uA

110 V

No

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

No

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

INA281B2IDBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1.833 MHz

No

150 uV

30 uA

Yes

1

120 dB

140 dB

2.25 mA

Transconductance

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Operational Amplifiers

2.5 V/us

22 V

0.037 in (0.95 mm)

125 °C (257 °F)

30 uA

110 V

No

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

No

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

INA281B5IDBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1.269 MHz

No

150 uV

30 uA

Yes

1

120 dB

140 dB

2.25 mA

Transconductance

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Operational Amplifiers

2.5 V/us

22 V

0.037 in (0.95 mm)

125 °C (257 °F)

30 uA

110 V

No

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

No

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

INA183A3IDBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

19.74 kHz

No

170 uV

40 uA

Yes

1

100 dB

120 dB

140 μA

No

Tape And Reel, 7 Inch

12 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Operational Amplifiers

0.4 V/us

26 V

0.037 in (0.95 mm)

125 °C (257 °F)

40 uA

26 V

No

-40 °C (-40 °F)

Matte Tin

Dual

No

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

INA183A1IDBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

112.8 kHz

No

170 uV

40 uA

Yes

1

100 dB

120 dB

140 μA

No

Tape And Reel, 7 Inch

12 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Operational Amplifiers

0.4 V/us

26 V

0.037 in (0.95 mm)

125 °C (257 °F)

40 uA

26 V

No

-40 °C (-40 °F)

Matte Tin

Dual

No

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

INA183A2IDBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

42.3 kHz

No

170 uV

40 uA

Yes

1

100 dB

120 dB

140 μA

No

Tape And Reel, 7 Inch

12 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Operational Amplifiers

0.4 V/us

26 V

0.037 in (0.95 mm)

125 °C (257 °F)

40 uA

26 V

No

-40 °C (-40 °F)

Matte Tin

Dual

No

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

MCP6006T-E/OTVAO

Microchip Technology

Operational Amplifier

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1 MHz

Yes

1600 uV

Yes

1

50 dB

CMOS

AEC-Q100

76 dB

70 μA

Voltage Feedback

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

1.9 V/us

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

Yes

177827

-40 °C (-40 °F)

Dual

No

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

Yes

0.114 in (2.9 mm)

No

No

OPA397DBVT

Texas Instruments

Operational Amplifier

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

13 MHz

Yes

60 uV

50 pA

Yes

1

75 dB

CMOS

120 dB

1.5 mA

Voltage Feedback

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

0.8 pA

4.5 V/us

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

1 pA

Yes

199526

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

Yes

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

TSL6001ILT

STMicroelectronics

Operational Amplifier

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1 MHz

Yes

4500 uV

Yes

1

53 dB

74 dB

100 μA

Voltage Feedback

No

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

0.4 V/us

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

Yes

17782

-40 °C (-40 °F)

Dual

No

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

Yes

0.114 in (2.9 mm)

No

No

TLV387DBVT

Texas Instruments

Operational Amplifier

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5.7 MHz

Yes

10 uV

350 pA

Yes

1

130 dB

150 dB

675 μA

Voltage Feedback

No

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

2.8 V/us

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

300 pA

Yes

1000000

-40 °C (-40 °F)

Matte Tin

Dual

Yes

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

Yes

e3

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

OPA182IDBVT

Texas Instruments

Operational Amplifier

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

5 MHz

-20 V

Yes

4 uV

7 nA

Yes

1

141 dB

168 dB

1 mA

Voltage Feedback

No

Tape And Reel, 7 Inch

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

10 V/us

20 V

0.037 in (0.95 mm)

125 °C (257 °F)

350 pA

Yes

31622776

-40 °C (-40 °F)

Tin

Dual

Yes

R-PDSO-G5

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

No

No

OPA1655DBVT

Texas Instruments

Operational Amplifier

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

53 MHz

-20 V

Yes

1000 uV

Yes

1

106 dB

120 dB

4.6 mA

Voltage Feedback

No

Tape And Reel

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

24 V/us

20 V

0.037 in (0.95 mm)

125 °C (257 °F)

Yes

5011872.336

-40 °C (-40 °F)

Tin

Dual

No

R-PDSO-G5

2

0.043 in (1.1 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

No

Yes

MCP6486T-E/OTVAO

Microchip Technology

Operational Amplifier

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

10 MHz

No

1600 uV

Yes

1

66 dB

CMOS

AEC-Q100

110 dB

720 μA

Voltage Feedback

No

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

SOP5,.11,37

20 V/us

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

Yes

177827.941

-40 °C (-40 °F)

Dual

No

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

Yes

0.114 in (2.9 mm)

No

No

Operational Amplifiers (Op Amps)

Operational amplifiers, or op-amps for short, are electronic circuits that provide a high gain amplification of an input voltage signal. They are widely used in electronic circuits for various signal processing tasks due to their versatile nature and high gain characteristics.

An op-amp typically has two input terminals (inverting and non-inverting), an output terminal, and a power supply. The output voltage of the op-amp is proportional to the difference between the voltages at the two input terminals, with the exact gain being determined by the circuit design.

Op-amps can be used in a variety of electronic circuits such as filters, amplifiers, oscillators, and voltage regulators. They can also be used as comparators, with the output switching to one of two voltage levels depending on the relationship between the two input voltages.

One of the main advantages of op-amps is that they can provide a very high gain, making them useful in amplifying small signals or reducing noise. They also have a wide range of input and output impedance, making them compatible with a wide range of electronic circuits. Additionally, op-amps can be designed to have very high input impedance, which means they can detect and amplify signals with minimal loading effects on the circuit they are connected to.