Onsemi Operational Amplifiers (Op Amps) 201

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Low-Bias Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Architecture Programmable Power Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Maximum Input Offset Current (IIO) Minimum Slew Rate Sub-Category Nominal Slow Rate Maximum Non Linearity Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Frequency Compensation Minimum Voltage Gain Minimum Operating Temperature Terminal Finish Nominal Voltage Gain Terminal Position Low-Offset JESD-30 Code Maximum Voltage Gain Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Minimum Output Current Nominal Bandwidth (3dB) Micropower JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Wideband Power

NCS2551SNT1G

Onsemi

Operational Amplifier

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

BIPOLAR

Small Outline, Thin Profile, Shrink Pitch

Operational Amplifiers

0.037 in (0.95 mm)

Tin

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

NCS2552SNT1G

Onsemi

Operational Amplifier

Industrial

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

BIPOLAR

Small Outline, Thin Profile, Shrink Pitch

Operational Amplifiers

0.037 in (0.95 mm)

Tin

Dual

R-PDSO-G6

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

LMV824DTBR2G

Onsemi

Operational Amplifier

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

5.6 MHz

4000 uV

380 nA

Yes

4

90 dB

0 V

5 V

Small Outline

Operational Amplifiers

2 V/us

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

NCS2510SNT1G

Onsemi

Operational Amplifier

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

BIPOLAR

Small Outline, Thin Profile, Shrink Pitch

Operational Amplifiers

0.037 in (0.95 mm)

Tin

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.059 in (1.5 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

NCS2530DTBG

Onsemi

Operational Amplifier

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

Yes

3

BIPOLAR

Small Outline, Thin Profile, Shrink Pitch

Operational Amplifiers

0.026 in (0.65 mm)

Nickel Palladium Gold

Dual

R-PDSO-G16

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

NCS2540DTBR2G

Onsemi

Operational Amplifier

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

Yes

3

BIPOLAR

Small Outline, Thin Profile, Shrink Pitch

Operational Amplifiers

0.026 in (0.65 mm)

Nickel Palladium Gold

Dual

R-PDSO-G16

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LM324SNG

Onsemi

Operational Amplifier

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

9000 uV

500 nA

No

4

BIPOLAR

70 dB

5 V

In Line

Operational Amplifiers

32 V

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Tin

Dual

R-PDIP-T14

0.21 in (5.33 mm)

0.3 in (7.62 mm)

e3

0.755 in (19.18 mm)

NCV5652MUTWG

Onsemi

Operational Amplifier

Automotive

No Lead

12

HVSON

Square

Plastic/Epoxy

350 kHz

15000 uV

1 uA

Yes

2

AEC-Q100

100 dB

5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

Operational Amplifiers

1.5 V/us

16 V

0.02 in (0.5 mm)

125 °C (257 °F)

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N12

1

0.022 in (0.55 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

NCS21911SN2T1G

Onsemi

Operational Amplifier

Automotive

Gull Wing

5

TSOP

Rectangular

Plastic/Epoxy

2 MHz

Yes

25 uV

3.5 nA

Yes

1

110 dB

BIPOLAR

130 dB

570 μA

Voltage Feedback

No

Tape And Reel

4 V

Small Outline, Thin Profile

TSOP5/6,.11,37

3.5 nA

Operational Amplifiers

1.6 V/us

40 V

0.037 in (0.95 mm)

125 °C (257 °F)

500 pA

Yes

1778279

-40 °C (-40 °F)

Matte Tin

Dual

Yes

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

Yes

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

No

No

Operational Amplifiers (Op Amps)

Operational amplifiers, or op-amps for short, are electronic circuits that provide a high gain amplification of an input voltage signal. They are widely used in electronic circuits for various signal processing tasks due to their versatile nature and high gain characteristics.

An op-amp typically has two input terminals (inverting and non-inverting), an output terminal, and a power supply. The output voltage of the op-amp is proportional to the difference between the voltages at the two input terminals, with the exact gain being determined by the circuit design.

Op-amps can be used in a variety of electronic circuits such as filters, amplifiers, oscillators, and voltage regulators. They can also be used as comparators, with the output switching to one of two voltage levels depending on the relationship between the two input voltages.

One of the main advantages of op-amps is that they can provide a very high gain, making them useful in amplifying small signals or reducing noise. They also have a wide range of input and output impedance, making them compatible with a wide range of electronic circuits. Additionally, op-amps can be designed to have very high input impedance, which means they can detect and amplify signals with minimal loading effects on the circuit they are connected to.