Industrial Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

AD9652BBCZ-310

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Ball

144

LFBGA

Square

Plastic/Epoxy

2

Yes

2.5 V

310 MHz

1

16

3.3 V

Offset Binary, 2's Complement Binary, Gray Code

Grid Array, Low Profile, Fine Pitch

0.031 in (0.8 mm)

85 °C (185 °F)

-2.5 V

Serial, Parallel, Word

-40 °C (-40 °F)

Tin Silver Copper

Sample

Bottom

12.5 ns

S-PBGA-B144

3

0.055 in (1.4 mm)

0.394 in (10 mm)

e1

260 °C (500 °F)

0.394 in (10 mm)

AD9652BBCZRL7-310

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Ball

144

LFBGA

Square

Plastic/Epoxy

2

Yes

2.5 V

310 MHz

1

16

3.3 V

Offset Binary, 2's Complement Binary, Gray Code

Grid Array, Low Profile, Fine Pitch

0.031 in (0.8 mm)

85 °C (185 °F)

-2.5 V

Serial, Parallel, Word

-40 °C (-40 °F)

Tin Silver Copper

Sample

Bottom

12.5 ns

S-PBGA-B144

3

0.055 in (1.4 mm)

0.394 in (10 mm)

e1

260 °C (500 °F)

0.394 in (10 mm)

ADC16DX370RME25

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

56

HVQCCN

Square

2

Yes

1.7 V

370 MHz

1

16

1.2 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-1.7 V

Serial

-40 °C (-40 °F)

Matte Tin

Quad

2.7 ns

S-XQCC-N56

3

0.031 in (0.8 mm)

0.315 in (8 mm)

e3

30 s

260 °C (500 °F)

0.315 in (8 mm)

AD10200BZ

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

68

QFP

Square

Ceramic, Metal-Sealed Cofired

1

Yes

2.048 V

105 MHz

2

12

0.0732 %

5 V

2's Complement Binary

3.3,5 V

Flatpack

QFP68,1.2SQ,50

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.048 V

Parallel, Word

-40 °C (-40 °F)

Track

Quad

10 ns

S-CQFP-G68

0.29 in (7.37 mm)

0.95 in (24.13 mm)

No

0.95 in (24.13 mm)

AD10465BZ

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

68

QFP

Square

Ceramic, Metal-Sealed Cofired

3

Yes

2 V

65 MHz

2

Bipolar

14

5 V

2's Complement Binary

3.3,5 V

-5 V

Flatpack

LDCC68,1.0SQ

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Track

Quad

S-CQFP-G68

0.175 in (4.45 mm)

0.95 in (24.13 mm)

No

0.95 in (24.13 mm)

AD7475BR

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

1 MHz

1

CMOS

12

0.0244 %

3 V

Binary

3/5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

800 ns

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD7495BR

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

1 MHz

1

12

0.0244 %

3 V

Binary

3/5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

800 ns

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

240 °C (464 °F)

0.193 in (4.9 mm)

AD7492AR

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

1 MHz

1

CMOS

12

0.0366 %

3 V

Binary

3/5 V

Small Outline

SOP24,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

880 ns

R-PDSO-G24

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

240 °C (464 °F)

0.606 in (15.4 mm)

AD7899AR-1

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

400 kHz

1

CMOS

14

0.0122 %

5 V

2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

2.2 µs

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

240 °C (464 °F)

0.705 in (17.9 mm)

AD7899AR-3

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

400 kHz

1

CMOS

14

0.0122 %

5 V

2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

2.2 µs

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

240 °C (464 °F)

0.705 in (17.9 mm)

AD7899ARS-1

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

400 kHz

1

CMOS

14

0.0122 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

2.2 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

240 °C (464 °F)

0.402 in (10.2 mm)

AD7899ARS-2

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

2

Yes

5 V

400 kHz

1

CMOS

14

0.0122 %

5 V

Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

2.2 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

240 °C (464 °F)

0.402 in (10.2 mm)

AD7899BR-1

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

400 kHz

1

14

0.0092 %

5 V

2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

2.2 µs

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

240 °C (464 °F)

0.705 in (17.9 mm)

AD9214BRS-105

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

105 MHz

1

CMOS

10

0.2441 %

3 V

Offset Binary, 2's Complement Binary

3 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

240 °C (464 °F)

0.402 in (10.2 mm)

AD9214BRS-65

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

65 MHz

1

CMOS

10

0.1855 %

3 V

Offset Binary, 2's Complement Binary

3 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

240 °C (464 °F)

0.402 in (10.2 mm)

AD9214BRS-80

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

80 MHz

1

CMOS

10

0.1758 %

3 V

Offset Binary, 2's Complement Binary

3 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

240 °C (464 °F)

0.402 in (10.2 mm)

AD9226ARS

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

65 MHz

1

CMOS

12

0.0391 %

5 V

Binary, 2's Complement Binary

3,5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Sample

Dual

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

240 °C (464 °F)

0.402 in (10.2 mm)

MAX1091AEEI

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

250 kHz

1

10

0.0488 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP28,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Dual

4.1 µs

R-PDSO-G28

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.389 in (9.89 mm)

MAX1091BEEI

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

250 kHz

1

10

0.0977 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP28,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Dual

4.1 µs

R-PDSO-G28

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.389 in (9.89 mm)

MAX1093AEEG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

4

Yes

1.25 V

250 kHz

1

10

0.0488 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Dual

4.1 µs

R-PDSO-G24

1

0.068 in (1.73 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.341 in (8.65 mm)

MAX1093BEEG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

4

Yes

1.25 V

250 kHz

1

10

0.0977 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Dual

4.1 µs

R-PDSO-G24

1

0.068 in (1.73 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.341 in (8.65 mm)

TLV2542IDR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2

Yes

5.5 V

200 kHz

1

CMOS

12

1.5 mA

0.0244 %

3.3 V

Binary

3/5 V

Small Outline

SOP8,.25

Analog to Digital Converters

2.7 V

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

3.5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

TLV2545IDGK

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

200 kHz

1

CMOS

12

1.5 mA

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP8,.19

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Sample

Dual

3.5 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

MAX1090AEEI

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

400 MHz

1

10

0.0488 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Dual

4 µs

R-PDSO-G28

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.389 in (9.89 mm)

MAX1090BEEI

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

400 MHz

1

10

0.0977 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Dual

4 µs

R-PDSO-G28

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.389 in (9.89 mm)

MAX1084AESA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

400 kHz

1

BICMOS

10

0.0488 %

5 V

Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.193 in (4.9 mm)

MAX1085AESA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

300 kHz

1

BICMOS

10

0.0488 %

3 V

Binary

3/3.3 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.193 in (4.9 mm)

MAX1085BESA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

300 kHz

1

BICMOS

10

0.0977 %

3 V

Binary

3/3.3 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.193 in (4.9 mm)

MAX1280BEUP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

2.52 V

400 kHz

1

BICMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.256 in (6.5 mm)

MAX1281BEUP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

2.52 V

300 kHz

1

BICMOS

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.256 in (6.5 mm)

AD7495BRM

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

1 MHz

1

CMOS

12

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

800 ns

R-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

240 °C (464 °F)

0.118 in (3 mm)

THS1206IDAR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

32

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

4 V

6 MHz

1

CMOS

12

40 mA

0.0366 %

3.3 V

Binary, 2's Complement Binary

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP32,.3

Analog to Digital Converters

3 V

0.026 in (0.65 mm)

85 °C (185 °F)

1.4 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

175 ns

R-PDSO-G32

2

0.047 in (1.2 mm)

0.24 in (6.1 mm)

No

e4

30 s

260 °C (500 °F)

0.433 in (11 mm)

TLV1508IPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

200 kHz

1

CMOS

10

1.6 mA

0.0488 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.86 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

TLV1508IPW

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

200 kHz

1

CMOS

10

1.6 mA

0.0488 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.86 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

TLV1543IDBR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

38 kHz

1

CMOS

10

2.5 mA

0.0977 %

3.3 V

Binary

3.3 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

3 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

TLV1544IPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

87 kHz

1

CMOS

10

1.5 mA

0.0977 %

2.7 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

25 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TLV1548IDBR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

87 kHz

1

CMOS

10

1.5 mA

0.0977 %

2.7 V

Binary

3/5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

25 µs

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.283 in (7.2 mm)

TLV2544IPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

200 kHz

1

CMOS

12

2.1 mA

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.86 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

TLV2548IPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

200 kHz

1

CMOS

12

1.6 mA

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.86 µs

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

MAX1080AEUP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

2.5 V

400 kHz

1

BICMOS

10

0.0488 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

245 °C (473 °F)

0.256 in (6.5 mm)

MAX1081AEUP

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

2.5 V

300 kHz

1

BICMOS

10

0.0488 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.256 in (6.5 mm)

MAX1284BESA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

400 kHz

1

BICMOS

12

0.0244 %

5 V

Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

MAX1285BESA

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

400 kHz

1

BICMOS

12

0.0244 %

5 V

Binary

3/3.3 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

AD7893AR-10REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

1

BICMOS

12

0.0244 %

5 V

2's Complement Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

6 µs

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

AD9235BRU-20

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

20 MHz

1

CMOS

12

0.0195 %

3 V

Offset Binary, 2's Complement Binary

2.5,3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

500 mV

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Sample

Dual

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.382 in (9.7 mm)

AD9235BRU-40

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

40 MHz

1

CMOS

12

0.022 %

3 V

Offset Binary, 2's Complement Binary

2.5,3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

500 mV

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Sample

Dual

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.382 in (9.7 mm)

AD9235BRU-65

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

65 MHz

1

CMOS

12

0.0317 %

3 V

Offset Binary, 2's Complement Binary

2.5,3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

500 mV

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Sample

Dual

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.382 in (9.7 mm)

AD7710AR-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

1

CMOS

24

0.003 %

5 V

Binary, Offset Binary

±5/10 V

-5 V

Small Outline

SOP24,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Tin Lead

Sample

Dual

R-PDSO-G24

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

240 °C (464 °F)

0.606 in (15.4 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.