Industrial Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADS8517IDWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

200 kHz

1

16

0.0046 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

2.5 µs

R-PDSO-G28

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

AD9261BCPZRL7-10

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

48

HVQCCN

Square

1

Yes

2 V

160 MHz

1

CMOS

16

0.0022 %

1.8 V

Offset Binary, 2's Complement Binary, Gray Code

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Quad

33 ns

S-XQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS5553IPFPR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

80

HTFQFP

Square

Plastic/Epoxy

2

Yes

2.3 V

65 MHz

1

CMOS

14

0.0244 %

3.3 V

2's Complement Binary

3.3 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP80,.55SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQFP-G80

3

0.047 in (1.2 mm)

0.472 in (12 mm)

No

e4

30 s

260 °C (500 °F)

0.472 in (12 mm)

ADS5553IPFP

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

80

HTFQFP

Square

Plastic/Epoxy

2

Yes

2.3 V

65 MHz

1

CMOS

14

288 mA

0.0244 %

3.3 V

2's Complement Binary

3.3 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP80,.55SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.3 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQFP-G80

3

0.047 in (1.2 mm)

0.472 in (12 mm)

No

Peak-to-peak input voltage range: 2.3 V

e4

30 s

260 °C (500 °F)

0.472 in (12 mm)

ADS5423IPJYR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

52

HLQFP

Square

Plastic/Epoxy

1

Yes

2.2 V

80 MHz

1

Bipolar

14

5 V

2's Complement Binary

3.3,5 V

Flatpack, Heat Sink/Slug, Low Profile

HQFP52,.47SQ

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Tin

Track

Quad

S-PQFP-G52

3

0.063 in (1.6 mm)

0.394 in (10 mm)

No

e3

0.394 in (10 mm)

PCM1803DBR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

2

Yes

3 V

96 kHz

1

CMOS

24

10 mA

5 V

2's Complement Binary

3.3,5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

PCM1803DB

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

2

Yes

3 V

96 kHz

1

CMOS

24

10 mA

5 V

2's Complement Binary

3.3,5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

TLV5535IPWRQ1

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.5 V

35 MHz

1

CMOS

AEC-Q100

8

0.9375 %

3.3 V

Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

800 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Sample

Dual

28.5 ns

R-PDSO-G28

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.382 in (9.7 mm)

AD7792BRU

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

5 V

1

16

0.0015 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

30 s

240 °C (464 °F)

0.197 in (5 mm)

AD7793BRU

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

5 V

1

24

0.0015 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

30 s

240 °C (464 °F)

0.197 in (5 mm)

AD7794BRU-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

6

Yes

1

CMOS

24

0.0015 %

3 V

Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.307 in (7.8 mm)

AD7794BRU

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

6

Yes

1

CMOS

24

0.0015 %

3 V

Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.307 in (7.8 mm)

AD7799BRU-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

5 V

1

CMOS

24

0.0015 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.197 in (5 mm)

AD7799BRU

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

5 V

1

CMOS

24

0.0015 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.197 in (5 mm)

ADS801UG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

3.25 V

25 MHz

1

CMOS

12

0.0415 %

5 V

Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

1.25 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

100 µs

R-PDSO-G28

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

AD7466BRTZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

100 kHz

1

CMOS

12

0.0366 %

1.8 V

Binary

1.8/3.3 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

4.7 µs

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

AD7468BRTZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

100 kHz

1

CMOS

8

0.07813 %

1.8 V

Binary

1.8/3.3 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

4.7 µs

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

AD7478ARTZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

3 V

1 MHz

1

CMOS

8

0.1953 %

3 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

800 ns

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

AD7653ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

2.5 V

1 MHz

1

CMOS

16

0.0092 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7653ASTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

2.5 V

1 MHz

1

CMOS

16

0.0092 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

260 °C (500 °F)

0.276 in (7 mm)

AD7661ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

2.5 V

100 kHz

1

CMOS

16

0.0038 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7661ASTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

2.5 V

100 kHz

1

CMOS

16

0.0038 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7663ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

4

Yes

10 V

250 kHz

1

CMOS

16

0.0046 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7675ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

3.4 V

100 kHz

1

CMOS

16

0.0023 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.3 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7675ASTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

3.4 V

100 kHz

1

CMOS

16

0.0023 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.3 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7676ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

3.4 V

500 kHz

1

CMOS

16

0.0015 %

5 V

Binary, 2's Complement Binary

5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.3 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7676ASTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

3.4 V

500 kHz

1

CMOS

16

0.0015 %

5 V

Binary, 2's Complement Binary

5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.3 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

260 °C (500 °F)

0.276 in (7 mm)

AD7685BRMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

250 kHz

1

CMOS

16

0.0046 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

2.2 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

AD7705BRZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

19.2 kHz

1

CMOS

16

0.003 %

3 V

Binary, Offset Binary

3/5 V

Small Outline

SOP16,.4

Other Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

AD7708BRUZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

10

Yes

2.56 V

1

CMOS

16

0.0015 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.56 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

AD7716BSZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

44

QFP

Square

Plastic/Epoxy

4

Yes

2.5 V

1

CMOS

22

7.5 mA

0.006 %

5 V

2's Complement Binary

5 V

-5 V

Flatpack

QFP44,.5SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQFP-G44

3

0.096 in (2.45 mm)

0.394 in (10 mm)

No

e3

30 s

260 °C (500 °F)

0.394 in (10 mm)

AD7730BNZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Through-Hole

24

DIP

Rectangular

Plastic/Epoxy

2

No

800 mV

1

CMOS

19

0.0018 %

5 V

Binary

3/5,5 V

In-Line

DIP24,.3

Other Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-800 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T24

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

1.199 in (30.45 mm)

AD7730BRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

80 mV

1

Bipolar

6

0.0018 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7730BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

80 mV

1

Bipolar

6

0.0018 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7734BRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

15.4 kHz

1

24

0.0045 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

105 °C (221 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G28

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

260 °C (500 °F)

0.382 in (9.7 mm)

AD7777ARZ

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

4

Yes

3 V

1

CMOS

10

0.0977 %

5 V

2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

1 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

260 °C (500 °F)

0.705 in (17.9 mm)

AD7811YRUZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

3 V

350 kHz

1

10

0.0977 %

3 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

2.3 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

260 °C (500 °F)

0.197 in (5 mm)

AD7811YRUZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

3 V

350 kHz

1

10

0.0977 %

3 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

2.3 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7825BRUZ

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

2 MHz

1

CMOS

8

0.293 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Track

Dual

420 ns

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

260 °C (500 °F)

0.307 in (7.8 mm)

AD7825BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

2 MHz

1

CMOS

8

0.293 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Track

Dual

420 ns

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7859LASZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

44

QFP

Square

Plastic/Epoxy

8

Yes

1.25 V

100 kHz

1

CMOS

12

0.0244 %

3.6 V

Binary, 2's Complement Binary

Flatpack

0.031 in (0.8 mm)

85 °C (185 °F)

-1.25 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

10 µs

S-PQFP-G44

3

0.096 in (2.45 mm)

0.394 in (10 mm)

No

e3

260 °C (500 °F)

0.394 in (10 mm)

AD7859LASZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

44

QFP

Square

Plastic/Epoxy

8

Yes

1.25 V

200 kHz

1

CMOS

12

0.0244 %

3.6 V

Binary, 2's Complement Binary

Flatpack

0.031 in (0.8 mm)

85 °C (185 °F)

-1.25 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

10 µs

S-PQFP-G44

3

0.096 in (2.45 mm)

0.394 in (10 mm)

No

e3

260 °C (500 °F)

0.394 in (10 mm)

AD7862ARSZ-10

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

250 kHz

1

CMOS

12

0.0244 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

3.6 µs

R-PDSO-G28

3

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.402 in (10.2 mm)

AD7862ARSZ-10REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

250 kHz

1

CMOS

12

0.0244 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

3.6 µs

R-PDSO-G28

3

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.402 in (10.2 mm)

AD7862ARSZ-3

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

250 kHz

1

CMOS

12

0.0244 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.5 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

3.6 µs

R-PDSO-G28

3

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.402 in (10.2 mm)

AD7862ARSZ-3REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

250 kHz

1

CMOS

12

0.0244 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.5 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

3.6 µs

R-PDSO-G28

3

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.402 in (10.2 mm)

AD7863ARSZ-10

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

175 kHz

1

CMOS

14

0.0153 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

5.2 µs

R-PDSO-G28

3

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

40 s

260 °C (500 °F)

0.402 in (10.2 mm)

AD7863ARSZ-10REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

175 kHz

1

CMOS

14

0.0153 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

5.2 µs

R-PDSO-G28

3

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.402 in (10.2 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.