RECEIVER Fiber Optics - Receivers 57

Reset All

Part	Manufacturer	Fiber Optic Type	Mounting Feature	Maximum Supply Voltage	Terminal Finish	Maximum Operating Temperature	Minimum Operating Temperature	Emitter or Detector Type	Fiber Type	Connection Type	Nominal Supply Voltage	Packing Method	Body Length/Diameter	Body Width	Reception Type	Sub-Category	Body Height	Nominal Operating Wavelength	Minimum Supply Voltage	Minimum Operating Wavelength	Communication Standard	Maximum Operating Wavelength	Data Rate	Minimum Return Loss	Additional Features	JESD-609 Code	Built-in Features	Sensitivity Level
HFBR-2116TZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	5.5 V	Matte Tin (Sn)	70 Cel	0 Cel	PIN PHOTODIODE	62.5/125, MMF		5 V		41 mm	12.19 inch	DIGITAL	Fiber Optic Receivers	9.8 mm	1310 nm	4.5 V	1260 nm	OC-3, SONET	1360 nm	155 Mbps	12 dB		e3	AMPLIFIER
ADN3010-11-50A-WP	Analog Devices	RECEIVER	SURFACE MOUNT	3.6 V		85 Cel	-40 Cel		SMF		3.3 V	TR	.835 mm	.675 inch			.245 mm	1310 nm	3 V	850 nm	SONET	1565 nm	1412.5 Mbps				AMPLIFIER, PIN PHOTODIODE	-16.5 dBm
TORX1353(F)	Toshiba	RECEIVER	THROUGH HOLE MOUNT	5.25 V		85 Cel	-40 Cel		980/1000, POF		5 V				DIGITAL		8.5 mm		4.75 V				.5 Mbps
TORX1353(V,F)	Toshiba	RECEIVER	THROUGH HOLE MOUNT	5.25 V		85 Cel	-40 Cel		980/1000, POF		5 V		15.4 mm	10.5 inch	DIGITAL		8.9 mm		4.75 V				.5 Mbps
ADN3010-11-50A-DF	Analog Devices	RECEIVER	SURFACE MOUNT	3.6 V		85 Cel	-40 Cel		SMF		3.3 V	TR	.835 mm	.675 inch			.245 mm	1310 nm	3 V	850 nm	SONET	1565 nm	1412.5 Mbps				AMPLIFIER, PIN PHOTODIODE	-16.5 dBm
ADN3010-11-50A-RL7	Analog Devices	RECEIVER	SURFACE MOUNT	3.6 V		85 Cel	-40 Cel		SMF		3.3 V	TR	.835 mm	.675 inch			.245 mm	1310 nm	3 V	850 nm	SONET	1565 nm	1412.5 Mbps				AMPLIFIER, PIN PHOTODIODE	-16.5 dBm
HFD3020-500-BBA	Honeywell	RECEIVER	PANEL MOUNT	5.25 V		85 Cel	-25 Cel		980/1000, 200/230, POF, HCS	ST CONNECTOR	5 V				DIGITAL			850 nm	4.75 V				16 Mbps		IT ALSO HAVE FIBER TYPE 50/125, 62.5/125		AMPLIFIER	-30 dBm
AFBR-2521CZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	3.465 V	Tin (Sn)	95 Cel	-40 Cel		POF		3.3 V				DIGITAL	Fiber Optic Receivers		650 nm	3.135 V						IT ALSO OPERATES AT 5V NOMINAL SUPPLY VOLTAGE	e3	PHOTODIODE
AFBR-2541CZ	Broadcom	RECEIVER	THROUGH HOLE MOUNT	3.465 V	Tin (Sn)	95 Cel	-40 Cel		POF		3.3 V				DIGITAL	Fiber Optic Receivers		650 nm	3.135 V						IT ALSO OPERATES AT 5V NOMINAL SUPPLY VOLTAGE	e3	PHOTODIODE

Fiber Optics - Receivers

Fiber optic receivers are electronic devices that are used in fiber optic communication systems to detect and convert optical signals into electrical signals. They are a critical component of fiber optic networks, enabling high-speed data transmission and processing over long distances.

Fiber optic receivers typically consist of a photodetector, an amplifier, and a demodulator. The photodetector detects the optical signal and converts it into an electrical signal. The amplifier amplifies the electrical signal, making it strong enough for further processing. The demodulator extracts the data from the electrical signal, enabling it to be decoded and processed by the receiving device.

There are different types of photodetectors used in fiber optic receivers, including PIN photodiodes, avalanche photodiodes, and photomultiplier tubes. These photodetectors convert the incoming optical signal into an electrical current, which is then amplified and demodulated.

Fiber optic receivers come in different configurations and designs, depending on the application and the required performance. They can be integrated into a fiber optic network or mounted in a separate enclosure, depending on the application and the space available.