Tin (Sn) Fiber Optics - Receivers 4

Reset All
Part RoHS Manufacturer Fiber Optic Type Mounting Feature Maximum Supply Voltage Terminal Finish Maximum Operating Temperature Minimum Operating Temperature Emitter or Detector Type Responsivity Fiber Type Connection Type Nominal Supply Voltage Packing Method Body Length/Diameter Body Width Package Style (Meter) Reception Type Sub-Category Body Height Nominal Operating Wavelength Minimum Supply Voltage Minimum Operating Wavelength Communication Standard Maximum Operating Wavelength Data Rate Minimum Return Loss Additional Features JESD-609 Code Built-in Features Sensitivity Level

HFBR-2115TZ

Broadcom

RECEIVER

THROUGH HOLE MOUNT

5.5 V

Tin (Sn)

70 Cel

0 Cel

PIN PHOTODIODE

MMF

ST CONNECTOR

5 V

12.19 inch

DIP

DIGITAL

Fiber Optic Receivers

9.8 mm

1325 nm

4.5 V

1270 nm

ATM

1380 nm

100 Mbps

WB-MAX

e3

AMPLIFIER

HFBR-2119TZ

Broadcom

RECEIVER

THROUGH HOLE MOUNT

5.5 V

Tin (Sn)

70 Cel

0 Cel

PIN PHOTODIODE

MMF

ST CONNECTOR

5 V

12.19 inch

DIP

DIGITAL

Fiber Optic Receivers

9.8 mm

1325 nm

4.5 V

1270 nm

ATM

1380 nm

WB-MAX

e3

AMPLIFIER

AFBR-2521CZ

Broadcom

RECEIVER

THROUGH HOLE MOUNT

3.465 V

Tin (Sn)

95 Cel

-40 Cel

POF

3.3 V

DIGITAL

Fiber Optic Receivers

650 nm

3.135 V

IT ALSO OPERATES AT 5V NOMINAL SUPPLY VOLTAGE

e3

PHOTODIODE

AFBR-2541CZ

Broadcom

RECEIVER

THROUGH HOLE MOUNT

3.465 V

Tin (Sn)

95 Cel

-40 Cel

POF

3.3 V

DIGITAL

Fiber Optic Receivers

650 nm

3.135 V

IT ALSO OPERATES AT 5V NOMINAL SUPPLY VOLTAGE

e3

PHOTODIODE

Fiber Optics - Receivers

Fiber optic receivers are electronic devices that are used in fiber optic communication systems to detect and convert optical signals into electrical signals. They are a critical component of fiber optic networks, enabling high-speed data transmission and processing over long distances.

Fiber optic receivers typically consist of a photodetector, an amplifier, and a demodulator. The photodetector detects the optical signal and converts it into an electrical signal. The amplifier amplifies the electrical signal, making it strong enough for further processing. The demodulator extracts the data from the electrical signal, enabling it to be decoded and processed by the receiving device.

There are different types of photodetectors used in fiber optic receivers, including PIN photodiodes, avalanche photodiodes, and photomultiplier tubes. These photodetectors convert the incoming optical signal into an electrical current, which is then amplified and demodulated.

Fiber optic receivers come in different configurations and designs, depending on the application and the required performance. They can be integrated into a fiber optic network or mounted in a separate enclosure, depending on the application and the space available.