15 A Data Line Filters 5

Reset All
Part RoHS Manufacturer Filter Type Construction Maximum DC Resistance Maximum Frequency Material Rated Current Minimum Insulation Resistance Approvals (V) Power Supply (V) No. of Functions Technology Screening Level Output Impedance (ohm) High Pot Packing Method Mounting Type Rated Voltage No. of Terminals Sub-Category Dimensions Case Code Maximum Operating Temperature Attenuation At Maximum Frequency Minimum Attenuation Frequency Package Material Minimum Operating Temperature Attenuation At Minimum Frequency Terminal Finish Inductance Maximum Attenuation Frequency Manufacturer Series Height Width (mm) Diameter (mm) Maximum Insertion Loss Additional Features JESD-609 Code Minimum Frequency Operating Frequency (Hz) Series Length Capacitance

BNX025H01B

Murata Manufacturing

DATA LINE FILTER

15 A

50 Mohm

1

AEC-Q200

50 OHM

BULK

SURFACE MOUNT

25 V

L12.1XB9.1XH3.5 (mm)/L0.476XB0.358XH0.138 (inch)

125 Cel

-55 Cel

TIN SILVER

3.5 mm

9.1

e2

12.1 mm

BNX005-01

Murata Manufacturing

DATA LINE FILTER

100 ohm

15 A

100 Mohm

3

50 OHM

BOX

THROUGH HOLE MOUNT

50 V

L12.0XB11.0XH13.5 (mm)/L0.472XB0.433XH0.531 (inch)

85 Cel

-30 Cel

Tin/Silver/Copper (Sn/Ag/Cu)

13.5 mm

11.0

40 dB

e1

12 mm

BNX024H01B

Murata Manufacturing

DATA LINE FILTER

15 A

100 Mohm

1

AEC-Q200

50 OHM

BULK

SURFACE MOUNT

50 V

L12.1XB9.1XH3.5 (mm)/L0.476XB0.358XH0.138 (inch)

125 Cel

-55 Cel

TIN SILVER

3.5 mm

9.1

e2

12.1 mm

SFJNL5000334MX1

Knowles Precision Devices

DATA LINE FILTER

15 A

10000 Mohm

1

PANEL MOUNT

500 V

D9.8XH9.4 (mm)/D0.386XH0.37 (inch)

125 Cel

-55 Cel

SILVER

.5 uH

9.4 mm

9.8

70 dB

L-C TYPE CIRCUIT

e4

330000 uF

SC-15-E350H

KEMET Corporation

MAINS FILTER

.02 ohm

15 A

2

BOX; TRAY

THROUGH HOLE MOUNT

250 V

4

120 Cel

-25 Cel

3500 uH

28 mm

50

COMMON MODE CHOKE

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.