KEMET Corporation Data Line Filters 16

Reset All

Part	Manufacturer	Filter Type	Construction	Maximum DC Resistance	Maximum Frequency	Material	Rated Current	Approvals (V)	No. of Functions	Output Impedance (ohm)	Packing Method	Mounting Type	Rated Voltage	No. of Terminals	Sub-Category	Dimensions	Case Code	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Inductance	Height	Width (mm)	Diameter (mm)	Additional Features	JESD-609 Code	Minimum Frequency	Length
Z0603C391APMST	KEMET Corporation	FERRITE CHIP	Chip Bead	.14 ohm	100 MHz	Ferrite	1 A		1	390 OHM	TR	SURFACE MOUNT		2	Other Filters	L1.6XB.8XH.8 (mm)/L.063XB.0315XH.0315 (inch)	0603	85 Cel	-55 Cel	Matte Tin (Sn)		.8 mm	.8			e3	100 MHz	1.6 mm
Z0805C420APWST	KEMET Corporation	FERRITE CHIP	Chip Bead	.008 ohm	100 MHz	Ferrite	4 A		1	42 OHM	TR	SURFACE MOUNT		2	Other Filters	L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch)	0805	125 Cel	-40 Cel	Matte Tin (Sn)		.85 mm	1.25			e3	100 MHz	2 mm
Z0402C102BSMST	KEMET Corporation	FERRITE CHIP	Chip Bead	.8 ohm	100 MHz	Ferrite	.15 A		1	1000 OHM	TAPE AND REEL	SURFACE MOUNT		2	Other Filters	L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch)	0402	125 Cel	-55 Cel	Matte Tin (Sn)		.5 mm	0.5			e3	100 MHz	1 mm
Z0402C121APMST	KEMET Corporation	FERRITE CHIP	Chip Bead	.14 ohm	100 MHz	Ferrite	1 A		1	120 OHM	TR	SURFACE MOUNT		2	Other Filters	L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch)	0402	85 Cel	-55 Cel	Matte Tin (Sn)		.5 mm	0.5			e3	100 MHz	1 mm
Z0402C241ASMST	KEMET Corporation	FERRITE CHIP	Chip Bead	.33 ohm	100 MHz	Ferrite	.4 A		1	240 OHM	TAPE AND REEL	SURFACE MOUNT		2	Other Filters	L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch)	0402	125 Cel	-55 Cel	Matte Tin (Sn)		.5 mm	0.5			e3	100 MHz	1 mm
Z0402C601ESMST	KEMET Corporation	FERRITE CHIP	Chip Bead	.6 ohm	100 MHz	Ferrite	.3 A		1	600 OHM	TAPE AND REEL	SURFACE MOUNT		2	Other Filters	L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch)	0402	125 Cel	-55 Cel	Matte Tin (Sn)		.5 mm	0.5			e3	100 MHz	1 mm
Z0805C252DSMST	KEMET Corporation	FERRITE CHIP	Chip Bead	.75 ohm	100 MHz	Ferrite	.2 A		1	2500 OHM	TAPE AND REEL	SURFACE MOUNT		2	Other Filters	L2.0XB1.25XH1.25 (mm)/L0.079XB0.049XH0.049 (inch)	0805	125 Cel	-55 Cel	Matte Tin (Sn)		1.25 mm	1.25			e3	100 MHz	2 mm
FLLE2250APXI1	KEMET Corporation	DATA LINE FILTER					250 A	UL; IEC; EN	1			CHASSIS MOUNT	1200 V			L300.0XB130.0XH100.0 (mm)/L11.811XB5.118XH3.937 (inch)		100 Cel	-40 Cel			100 mm	130.0					300 mm
SC-05-103	KEMET Corporation	MAINS FILTER		.05 ohm			5 A		2		BOX; TRAY	THROUGH HOLE MOUNT	250 V	4				120 Cel	-25 Cel		1000 uH	18.5 mm		25	COMMON MODE CHOKE
SC-05-E06H	KEMET Corporation	MAINS FILTER		.0175 ohm			5 A		2		BOX; TRAY	THROUGH HOLE MOUNT	250 V	4				120 Cel	-25 Cel		600 uH	13 mm		25	COMMON MODE CHOKE
SC-09-1400	KEMET Corporation	MAINS FILTER		.053 ohm			9 A		2		BOX; TRAY	THROUGH HOLE MOUNT	250 V	4				120 Cel	-25 Cel		14000 uH	40 mm		49	COMMON MODE CHOKE
SC-10-E200H	KEMET Corporation	MAINS FILTER		.02 ohm			10 A		2		BOX; TRAY	THROUGH HOLE MOUNT	250 V	4				120 Cel	-25 Cel		2000 uH	24 mm		34	COMMON MODE CHOKE
SC-15-E350H	KEMET Corporation	MAINS FILTER		.02 ohm			15 A		2		BOX; TRAY	THROUGH HOLE MOUNT	250 V	4				120 Cel	-25 Cel		3500 uH	28 mm		50	COMMON MODE CHOKE
SC-18-100	KEMET Corporation	MAINS FILTER		.02 ohm			18 A		2		BOX; TRAY	THROUGH HOLE MOUNT	250 V	4				120 Cel	-25 Cel		700 uH	23 mm		34	COMMON MODE CHOKE
Z0603C102FSMST	KEMET Corporation	FERRITE CHIP	Chip Bead	.35 ohm	100 MHz	Ferrite	.3 A				TR	SURFACE MOUNT		2	Other Filters	L1.6XB.8XH.8 (mm)/L.063XB.0315XH.0315 (inch)	0603	125 Cel	-55 Cel	Matte Tin (Sn)		.8 mm	.8			e3	100 MHz	1.6 mm
Z0805C330ASMST	KEMET Corporation	FERRITE CHIP	Chip Bead	.05 ohm	100 MHz	Ferrite	1.2 A				TR				Other Filters	L2XB1.25XH.85 (mm)/L.0787XB.0492XH.0335 (inch)	0805	125 Cel	-55 Cel	Matte Tin (Sn)		.85 mm	1.25			e3	100 MHz	2 mm

Data Line Filters

Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.

Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.

Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.