Murata Manufacturing Duplexers 2
| Part | RoHS | Manufacturer | Filter Type | No. of Functions | Packing Method | Connector (Input) | Mounting Type | Receive Center Frequency | No. of Terminals | Sub-Category | Dimensions | Maximum Operating Temperature | Rx Insertion Loss | Tx Insertion Loss | Package Material | Minimum Operating Temperature | Terminal Finish | Transmit Center Frequency | Manufacturer Series | Height | Width (mm) | Connector (Output) | Additional Features | JESD-609 Code | Voltage Standing Wave Ratio | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Murata Manufacturing |
DUPLEXER |
SURFACE MOUNT |
5375 MHz |
L2.0XB1.25XH0.9 (mm)/L0.079XB0.049XH0.035 (inch) |
.75 dB |
.5 dB |
Tin (Sn) |
2450 MHz |
.9 mm |
1.25 |
e3 |
2 mm |
|||||||||||||
|
|
Murata Manufacturing |
DUPLEXER |
SURFACE MOUNT |
2450 MHz |
L1.6XB0.8XH0.6 (mm)/L0.063XB0.031XH0.024 (inch) |
.4 dB |
.6 dB |
5375 MHz |
.6 mm |
0.8 |
1.6 mm |
Duplexers are electronic devices that are used in RF communication systems to allow the simultaneous transmission and reception of signals on a shared frequency band. They are commonly used in systems that require bidirectional communication, such as radios, cell phones, and other wireless communication devices.
Duplexers use a combination of passive and active components, including filters, circulators, and isolators, to separate the transmission and reception signals on a shared frequency band. They typically consist of two ports, one for transmission and one for reception, and a common port that connects to the antenna.
Duplexers can be designed for a wide range of frequencies and bandwidths, depending on the application. They can also be designed to operate in different environments, such as high-temperature or high-vibration environments.
Duplexers are critical components in many RF communication systems, providing a reliable and efficient way to allow simultaneous transmission and reception on a shared frequency band. Their efficiency and reliability make them ideal for applications that require bidirectional communication with minimal interference and signal loss.