6 A EMI Mains Filters 17

Reset All

Part	Manufacturer	Filter Type	Rated Current	Minimum Insulation Resistance	Approvals (V)	High Pot	Maximum Leakage Current	Packing Method	Mounting Type	Rated Voltage	Dimensions	Maximum Operating Temperature	Minimum Operating Temperature	Height	Width (mm)	Additional Features	Operating Frequency (Hz)	Length
NAC-06-472-D	Cosel	SINGLE PHASE EMI FILTER	6 A		UL; CSA; VDE; ENEC-10	2500 V	1 mA		DIN RAIL MOUNT	250 V	L92.0XB53.0XH41.0 (mm)/L3.622XB2.087XH1.614 (inch)	85 Cel	-40 Cel	41 mm	53.0		60Hz	92 mm
FMW-65-0002	Schurter Ag	THREE PHASE EMI FILTER	6 A		UL; IEC; VDE; ENEC-10	3000 V	.5 mA		PANEL MOUNT	440 V	L66.0XB51.0XH43.0 (mm)/L2.598XB2.008XH1.693 (inch)	100 Cel	-25 Cel	43 mm	51.0	INDUCTANCE 0.5 MILLIHENRY	50/60Hz	66 mm
FN2020-6-06	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	6 A		UL; CSA; ENEC	2000 V	.66 mA		SURFACE MOUNT	250 V	L43.5XB35.0XH29.3 (mm)/L1.713XB1.378XH1.154 (inch)	100 Cel	-25 Cel	29.3 mm	35.0	INDUCTANCE 1 MILLIHENRY	400Hz	43.5 mm
FN406B-6-02	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	6 A		UL; CSA; ENEC-14	2500 V	.002 mA		THROUGH HOLE MOUNT	250 V	L45.0XB15.0XH28.0 (mm)/L1.772XB0.591XH1.102 (inch)	100 Cel	-25 Cel	28 mm	15.0	MEDICAL VERSION; INDUCTANCE 0.78 MILLIHENRY	50/60Hz	45 mm
FMW-95-0001	Schurter Ag	THREE PHASE EMI FILTER	6 A		UL; IEC; VDE; ENEC-10	3000 V	.5 mA		PANEL MOUNT	440 V	L97.0XB52.0XH52.0 (mm)/L3.819XB2.047XH2.047 (inch)	100 Cel	-25 Cel	52 mm	52.0		50/60Hz	97 mm
1-1609034-2	TE Connectivity	SINGLE PHASE EMI FILTER	6 A				.75 mA		PANEL MOUNT	250 V		40 Cel	-10 Cel				50Hz
B84112B0000B060	TDK	SINGLE PHASE EMI FILTER	6 A		UL; CSA; ENEC-10	2700 V	.5 mA		PANEL MOUNT	250 V	L63.5XB50.8XH28.6 (mm)			28.6 mm	50.8	TAB CONNECTORS ON FACE ENDS, MOUNTING TABS ON FACE ENDS	50/60Hz	63.5 mm
FN2415-6-29	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	6 A		UL; CSA; ENEC-14	1100 V	9.4 mA		PANEL MOUNT	250 V	L94.0XB56.0XH45.4 (mm)/L3.701XB2.205XH1.787 (inch)	100 Cel	-25 Cel	45.4 mm	56.0	TERMINAL BLOCK CONNECTIONS	60Hz	94 mm
SC22-06-60J	KEMET Corporation	SINGLE PHASE EMI FILTER	6 A	100 Mohm	UL	500 V		TRAY	THROUGH HOLE MOUNT	250 V		120 Cel	-25 Cel	29.5 mm	20.5			29.5 mm
SCR22-060-1R0A075JH	KEMET Corporation	SINGLE PHASE EMI FILTER	6 A	100 Mohm	UL			TRAY	THROUGH HOLE MOUNT	250 V		120 Cel	-25 Cel	24 mm	30			32 mm
2-1609037-9	TE Connectivity	SINGLE PHASE EMI FILTER	6 A				.002 mA		PANEL MOUNT	250 V		40 Cel	-10 Cel				50Hz
6609053-5	TE Connectivity	SINGLE PHASE EMI FILTER	6 A				.002 mA		PANEL MOUNT	250 V		40 Cel	-10 Cel				50Hz
7448026002	Wurth Elektronik	SINGLE PHASE EMI FILTER	6 A					TRAY	THROUGH HOLE MOUNT	250 V	L18.0XB14.0XH22.0 (mm)/L0.709XB0.551XH0.866 (inch)	125 Cel	-40 Cel	22 mm	14.0		50Hz	18 mm
FN2415L-6-29	Schaffner Holding Ag	SINGLE PHASE EMI FILTER	6 A		IEC;EN;UL;CSA	1100 V	2.59 mA		PANEL MOUNT	250 V		100 Cel	-25 Cel	45.4 mm	56		400	94 mm
GTX-2060-YXX	KEMET Corporation	SINGLE PHASE EMI FILTER	6 A	300 Mohm	TUV;UL	500 V	4.6 mA	BOX	PANEL MOUNT	250 V		55 Cel	-25 Cel	25 mm	44			75 mm
S8V-NFS206	Omron	SINGLE PHASE EMI FILTER	6 A	100 Mohm	EN; CSA; IEC; UL		1 mA		PANEL MOUNT	250 V		85 Cel	-40 Cel	90 mm	32		50/60Hz	90 mm
810913006112	Wurth Elektronik	SINGLE PHASE EMI FILTER	6 A		CSA; ENEC-10; IEC; UL; VDE	1075 V	0 mA	TRAY	PANEL MOUNT	250 V		100 Cel	-25 Cel	45 mm	58.5		50-60	114.9 mm

EMI Mains Filters

EMI mains filters are electronic filters that are used to suppress electromagnetic interference (EMI) from mains power lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired power signal to pass through with minimal distortion.

EMI mains filters use a combination of passive and active components, including capacitors, inductors, resistors, and diodes, to filter out noise and interference from power lines. They can be designed for a wide range of power ratings and frequencies, depending on the application.

EMI mains filters can be designed as low-pass filters, which allow low-frequency power signals to pass through while attenuating high-frequency EMI signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.

EMI mains filters are commonly used in a variety of electronic systems, including power supplies, motor drives, medical equipment, and industrial control systems. They are also used in residential and commercial buildings to suppress EMI noise from power lines and prevent interference with other electronic devices.