TDK General Purpose Electronic Filters 8
| Part | RoHS | Manufacturer | Filter Type | Maximum Frequency | Minimum No. of Sections | Power Supply (V) | Maximum No. of Sections | Output Impedance (ohm) | Average Input Power | Packing Method | Connector (Input) | Mounting Type | No. of Terminals | I/O Impedance | Sub-Category | Dimensions | Maximum Operating Temperature | Attenuation At Maximum Frequency | Minimum Attenuation Frequency | Package Material | Minimum Operating Temperature | Attenuation At Minimum Frequency | Terminal Finish | Maximum Attenuation Frequency | Manufacturer Series | Height | Width (mm) | Diameter (mm) | Maximum Insertion Loss | Connector (Output) | Additional Features | Center/Cutoff Frequency (fo/fc) | JESD-609 Code | Minimum Frequency | Voltage Standing Wave Ratio | Impedance (Input) | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TDK |
BAND PASS FILTER |
50 OHM |
TR, 7 INCH |
SURFACE MOUNT |
4 |
L2.0XB1.25XH0.8 (mm)/L0.079XB0.049XH0.031 (inch) |
85 Cel |
-40 Cel |
.8 mm |
1.25 |
1.35 dB |
2448 MHz |
50 OHM |
2 mm |
||||||||||||||||||||||
|
|
TDK |
LOW PASS FILTER |
SURFACE MOUNT |
6 |
L2.0XB1.25XH0.6 (mm)/L0.079XB0.049XH0.024 (inch) |
85 Cel |
25 dB |
-40 Cel |
880 MHz |
.6 mm |
1.25 |
1 dB |
2 mm |
||||||||||||||||||||||||
|
|
TDK |
BAND PASS FILTER |
50 OHM |
SURFACE MOUNT |
4 |
L2.5XB2.0XH1.0 (mm)/L0.098XB0.079XH0.039 (inch) |
85 Cel |
-40 Cel |
Tin (Sn) |
1 mm |
2.0 |
1.5 dB |
5375 MHz |
e3 |
2 |
50 OHM |
2.5 mm |
||||||||||||||||||||
|
|
TDK |
LOW PASS FILTER |
SURFACE MOUNT |
4 |
L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch) |
85 Cel |
-40 Cel |
.8 mm |
0.8 |
.7 dB |
1.6 mm |
||||||||||||||||||||||||||
|
|
TDK |
LOW PASS FILTER |
SURFACE MOUNT |
4 |
L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch) |
85 Cel |
-40 Cel |
.8 mm |
0.8 |
.7 dB |
5850 MHz |
1.6 mm |
|||||||||||||||||||||||||
|
|
TDK |
BAND PASS FILTER |
50 OHM |
SURFACE MOUNT |
4 |
L2.5XB2.0XH1.0 (mm)/L0.098XB0.079XH0.039 (inch) |
85 Cel |
30 dB |
-40 Cel |
4800 MHz |
1 mm |
2.0 |
1.2 dB |
2450 MHz |
50 OHM |
2.5 mm |
|||||||||||||||||||||
|
|
TDK |
BAND PASS FILTER |
50 OHM |
SURFACE MOUNT |
4 |
L2.5XB2.0XH1.0 (mm)/L0.098XB0.079XH0.039 (inch) |
85 Cel |
23 dB |
2100 MHz |
-40 Cel |
20 dB |
Tin (Sn) |
5000 MHz |
1 mm |
2.0 |
1.5 dB |
2450 MHz |
e3 |
50 OHM |
2.5 mm |
|||||||||||||||||
|
|
TDK |
LOW PASS FILTER |
SURFACE MOUNT |
6 |
L1.6XB0.8XH0.6 (mm)/L0.063XB0.031XH0.024 (inch) |
85 Cel |
-40 Cel |
.6 mm |
0.8 |
.42 dB |
2400 MHz |
1.6 mm |
General-purpose electronic filters are electronic circuits that are used to selectively filter out unwanted frequencies from an input signal. They are designed to provide a high level of selectivity and precision in filtering, making them ideal for use in a wide range of applications.
General-purpose electronic filters can be designed with a variety of filter responses, including low-pass, high-pass, band-pass, and band-stop. They can also be designed with different cutoff frequencies and Q values, depending on the application.
General-purpose electronic filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out unwanted frequencies from an input signal. They can be designed for a wide range of input signals and frequencies, from audio signals to RF and microwave signals.
General-purpose electronic filters are commonly used in a variety of electronic systems, including audio processing, signal conditioning, and control systems. They are also used in scientific research applications, such as particle accelerators and radio telescopes.