COMMERCIAL Receiver ICs 8

Reset All

Part	Manufacturer	General IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Harmonic Distortion	Nominal Output Voltage (FM)	Package Style (Meter)	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Nominal Signal to Noise Ratio (FM)	Qualification	Minimum Supply Voltage (Vsup)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Nominal Output Voltage (AM)	Demodulation Type
TDA8295HN/C1,518	NXP Semiconductors	AUDIO/VIDEO DEMODULATOR	COMMERCIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		.1 %		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	.5 mm	70 Cel	0 Cel		QUAD	S-PQCC-N40		1.32 V	1 mm	6 mm		Not Qualified	1.08 V	IT CAN ALSO REQUIRES 2.97V TO 3.63V SUPPLY				6 mm		AM/FM
TEA5757H/V1,518	NXP Semiconductors	AUDIO SINGLE CHIP RECEIVER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1			1.5 %	48 mV	FLATPACK	.8 mm	60 Cel	-15 Cel	MATTE TIN	QUAD	S-PQFP-G44		12 V	2.1 mm	10 mm	62 dB	Not Qualified	2.5 V		e3			10 mm	45 mV	AM/FM
TDA9801/V1,112	NXP Semiconductors	AUDIO/VIDEO DEMODULATOR	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		70 mA		500 mV	IN-LINE	2.54 mm	70 Cel	-20 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T20		9.9 V	4.2 mm	7.62 mm	55 dB	Not Qualified	4.5 V		e4			26.73 mm	1414 mV	FM
TDA9801T/V1,118	NXP Semiconductors	AUDIO/VIDEO DEMODULATOR	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		70 mA		500 mV	SMALL OUTLINE	1.27 mm	70 Cel	-20 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	9.9 V	2.65 mm	7.5 mm	55 dB	Not Qualified	4.5 V		e4			12.8 mm	1414 mV	FM
TDA9830/V1,112	NXP Semiconductors	AUDIO DEMODULATOR	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		36 mA	.8 %		IN-LINE	2.54 mm	70 Cel	0 Cel	TIN	DUAL	R-PDIP-T16		8.8 V	4.7 mm	7.62 mm		Not Qualified	4.5 V	ALSO OPERATES AT 10.8V TO 13.2V	e3			21.6 mm	500 mV	AM
TDA9830T/V1,118	NXP Semiconductors	AUDIO DEMODULATOR	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		36 mA	.8 %		SMALL OUTLINE	1.27 mm	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	8.8 V	1.75 mm	3.9 mm		Not Qualified	4.5 V		e4			9.9 mm	500 mV	AM
TDA9874AH/V2,557	NXP Semiconductors	AUDIO DEMODULATOR	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1		10 mA	.3 %	500 mV	FLATPACK	1 mm	70 Cel	-20 Cel		QUAD	S-PQFP-G44		5.5 V	2.6 mm	14 mm	70 dB	Not Qualified	4.5 V			40	250	14 mm	500 mV	AM/FM
TEA5757H/V1,557	NXP Semiconductors	AUDIO SINGLE CHIP RECEIVER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1		19 mA	1.5 %	48 mV	FLATPACK	.8 mm	60 Cel	-15 Cel		QUAD	S-PQFP-G44		12 V	2.1 mm	10 mm	62 dB	Not Qualified	2.5 V			40	260	10 mm	45 mV	AM/FM

Receiver ICs

Receiver ICs, also known as radio receiver ICs or RF receiver ICs, are electronic components that receive and demodulate radio frequency (RF) signals. These ICs are used in a variety of applications, including wireless communication systems, radio receivers, and remote control systems.

Receiver ICs can be classified into several types based on the specific frequency range they operate in and the modulation scheme they support. Some of the most common types of receiver ICs include:

1. AM/FM receiver ICs - These ICs are designed to receive and demodulate analog AM and FM radio signals. They are used in radio receivers, car audio systems, and other audio applications.

2. Bluetooth receiver ICs - These ICs are designed to receive and demodulate Bluetooth signals, allowing wireless communication between devices such as smartphones, speakers, and headphones.

3. Wi-Fi receiver ICs - These ICs are designed to receive and demodulate Wi-Fi signals, allowing wireless communication between devices such as smartphones, computers, and routers.

4. GPS receiver ICs - These ICs are designed to receive and demodulate GPS signals, allowing precise location tracking and navigation.

Receiver ICs can be integrated into a variety of devices, from small portable devices to large communication systems. They can also be used in combination with other components, such as amplifiers, filters, and oscillators, to provide a complete RF system.