LINE RECEIVER Line Drivers & Receivers 433

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75LVDT390PWG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp		4		NO	e4	NOT SPECIFIED	260	5 mm		4 ns
SN65LV1224ADBRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	10.2 mm		0 ns
SN65LV1224BDBG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		TRUE	1		NO	e4	30	260	10.2 mm	2 V	0 ns
SN65LBC175ADG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		16 ns
MC100E416FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5		ECL			GENERAL PURPOSE	186 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	11.505 mm		.5 ns
SN75175DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp		4		NO	e4	NOT SPECIFIED	260	9.9 mm		35 ns
SN65LVDS94DGGG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	84 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY	4		NO	e4	30	260	14 mm		0 ns
AM26LV32CDE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS			EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp		4		NO	e4	30	260	9.9 mm		20 ns
MC3486NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	85 mA	DIFFERENTIAL	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel	5 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	8 Amp		4		NO	e4			19.305 mm		35 ns
AM26C32IPWRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	5 mm		27 ns
SN65LVDS3486DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		3 ns
SN75LVDS9637DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2					EIA-644; TIA-644	10 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified	8 Amp		2		NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		6 ns
SN65LVDS3486DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		3 ns
SN65LVDT33PWG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	5 mm		6 ns
SN65LVDT34DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS			EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	4.4 mm	Not Qualified	4 Amp	TRUE	2		NO	e4	30	260	4.9 mm		6 ns
SN75LVDS388ADBTRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G38		1.2 mm	4.4 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	9.7 mm		4 ns
THS6062IDRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	2					GENERAL PURPOSE		DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE					2.5 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
SN65LVDS048ADG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		4		NO	e4	30	260	9.9 mm		3.7 ns
SN65LVDS048APWG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp		4		NO	e4	30	260	5 mm		3.7 ns
SN65MLVD3DRBR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm	3 mm	Not Qualified	8 Amp	TRUE	1		NO	e4	30	260	3 mm	.48 V	6 ns
SN65MLVD3DRBT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm	3 mm	Not Qualified	8 Amp	TRUE	1		NO	e4	30	260	3 mm	.48 V	6 ns
DS90UB936TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N48	3	1 mm	7 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155	NO	e4	30	260	7 mm
DS90UB962WRTDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm				4	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155V	NO	e4	30	260	9 mm
DS90UH940NTNKDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2		NO	e3	30	260	9 mm
INA1651IPW	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1	1				GENERAL PURPOSE		DIFFERENTIAL		18 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.25 V			4.5 V	.65 mm	125 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm	4.4 mm				1		NO	e4	30	260	5 mm
DS90UB940NTNKDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	1.26 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.2 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.14 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 3 TO 3.6 V	NO	e3	30	260	9 mm
TDA8579T/N1SJ	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2					GENERAL PURPOSE		DIFFERENTIAL	8.5 V				SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm				1			e4	30	260	4.9 mm
TDA8579T/N1SU	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2					GENERAL PURPOSE		DIFFERENTIAL	8.5 V				SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm				1			e4	30	260	4.9 mm
DS90UH948TNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2	ALSO HAS SUPPLY VOLTAGE FROM 1.14 TO 1.26 V	NO	e3	30	260	9 mm
DS90UH948TNKDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2	ALSO HAS SUPPLY VOLTAGE FROM 1.14 TO 1.26 V	NO	e3	30	260	9 mm
DS90UB924TRHSRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm
DS90UB934TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm				2		NO	e4	30	260	7 mm
SN65LBC175AMDREP	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	32 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm				4		NO	e4	30	260	9.9 mm		18 ns
INA1650IPW	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	2	2				GENERAL PURPOSE		DIFFERENTIAL		18 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.25 V			4.5 V	.65 mm	125 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm	4.4 mm				2		NO	e4	30	260	5 mm
SN65LVDT2YDBVR	Texas Instruments	LINE RECEIVER																																	NICKEL PALLADIUM GOLD			1									e4	30	260
TB3R1LDR	Texas Instruments	LINE RECEIVER																																	NICKEL PALLADIUM GOLD			2									e4	30	250
DS90UB960WRTDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.1 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.045 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm				4	IT ALSO OPERATES WITH SUPPLY VOLTAGE=1.8 V		e4	30	260	9 mm
V62/17603-01XE	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	32 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm				4		NO	e4	30	260	9.9 mm		18 ns
PI90LV032ALEX	Diodes Incorporated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.2 mm	4.4 mm				4				30	260	5 mm		4.7 ns
DS90UH940NTNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2		NO	e3	30	260	9 mm
DS90UB940NTNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	1.26 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.2 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.14 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 3 TO 3.6 V	NO	e3	30	260	9 mm
SN65LVDS302ZXH	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1					GENERAL PURPOSE	68 mA	DIFFERENTIAL	1.8 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20			.00002 Amp	1.65 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm	5 mm		2 Amp	TRUE	3		NO	e1	30	260	5 mm
TDES954RGZR	Texas Instruments	LINE RECEIVER	OTHER	NO LEAD	48	HQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1						279 mA	DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20			.00019 Amp	1.71 V	.5 mm	85 Cel		OPEN-DRAIN	-20 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm		.035 Amp	INVERTED	1		YES	e4	30	260	7 mm
DS560MB410ZASR	Texas Instruments	LINE RECEIVER		BALL	101	TFBGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4						DIFFERENTIAL	2.5 V				GRID ARRAY, THIN PROFILE, FINE PITCH	BGA101,11X11,20				2.375 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B101	3	1.2 mm	6 mm				4		NO	e1		260	6 mm
DS560MB410ZAST	Texas Instruments	LINE RECEIVER		BALL	101	TFBGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4						DIFFERENTIAL	2.5 V				GRID ARRAY, THIN PROFILE, FINE PITCH	BGA101,11X11,20				2.375 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B101	3	1.2 mm	6 mm				4		NO	e1		260	6 mm
D9LVRA2IDEMT	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260			7.7 ns
D9LVRA2DEMT	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260			7.7 ns
DS90UB638TRGZTQ1	Texas Instruments	LINE RECEIVER		NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	1			AEC-Q100		GENERAL PURPOSE	205 mA	DIFFERENTIAL	1.1 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20			.00019 Amp	1.045 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm		2 Amp		1		NO	e4		260	7 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.