LINE TRANSCEIVER Line Drivers & Receivers 2,396

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65HVD77DGK	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				16 ns	EIA-485	1.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.65 mm	125 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm				1		YES	e4	NOT SPECIFIED	260	3 mm		40 ns
SN65HVD1780DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				2000 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		SMALL OUTLINE	SOP8,.25	3.15 V	Line Driver or Receivers		3.15 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.8 V	200 ns
SN65HVD1780DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				2000 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		SMALL OUTLINE	SOP8,.25	3.15 V	Line Driver or Receivers		3.15 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.8 V	200 ns
SN65HVD1782DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				50 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		SMALL OUTLINE	SOP8,.25	3.15 V	Line Driver or Receivers		3.15 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.8 V	80 ns
SN65HVD21ADR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				60 ns	EIA-485-A; TIA-485-A	12 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	30	260	4.9 mm	1.8 V	50 ns
TLK6002ZEU	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	324	BGA	SQUARE	PLASTIC/EPOXY	YES	1.05 V	2		CMOS			GENERAL PURPOSE		STANDARD	1 V	1.05 V			GRID ARRAY		.95 V			.95 V	1 mm	85 Cel	1 V		-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B324	4	2.42 mm	19 mm	Not Qualified		TRUE	2		YES	e1	30	260	19 mm		0 ns
ADM487EWARZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	AEC-Q100	60 ns	EIA-422; EIA-485	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	200 ns
ADM487EWARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	AEC-Q100	60 ns	EIA-422; EIA-485	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	200 ns
SN65LBC176QDRG4Q1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS	AEC-Q100	31 ns	EIA-485; ISO 8482	1.75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	TRUE	1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	4.9 mm	1.1 V	37 ns
74LVC1284D,118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			4		NO	e4			12.8 mm		9 ns
74LVC1284PW,118	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				20 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			4		NO	e4			6.5 mm		9 ns
MC145406D,512	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	4 Amp	INVERTED	3		NO	e4			10.3 mm	7.5 V	425 ns
MC145406D,518	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS		500 ns	EIA-232-D; V.28		SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	4 Amp	INVERTED	3		NO	e4			10.3 mm	7.5 V	425 ns
MC145406N,602	NXP Semiconductors	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3		CMOS		500 ns	EIA-232-D; V.28	.6 mA	SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		4.2 mm	7.62 mm	Not Qualified	4 Amp	INVERTED	3		NO	e4			19.025 mm		425 ns
P82B96PN,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	2		BIPOLAR			GENERAL PURPOSE	2.5 mA	STANDARD	5 V		2/15		IN-LINE	DIP8,.3		Other Interface ICs		2 V	2.54 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		4.2 mm	7.62 mm	Not Qualified			2		NO	e4			9.5 mm		0 ns
PCA9515AD,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.7 V	2		CMOS		130 ns	GENERAL PURPOSE		STANDARD	2.5 V		2.5/3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.3 V	1.27 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e4	30	260	4.9 mm		130 ns
PCA9515D,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS		170 ns				3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified						e4	30	260	4.9 mm		170 ns
PCA9516APW,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.7 V	10		CMOS		150 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.3 V	.65 mm	85 Cel			-40 Cel	10	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified			10	SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE	NO	e4	30	260	5 mm		150 ns
PCA9518D,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		389 ns	I2C			3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e4	30	260	12.8 mm		389 ns
PCA9542AD,112	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				.3 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE					2.3 V	1.27 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			2		NO	e4	30	260	8.65 mm		.3 ns
TLE7259GNT	Infineon Technologies	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1		BCDMOS		4000 ns	GENERAL PURPOSE		SCHMITT TRIGGER					SMALL OUTLINE					7 V	1.27 mm	125 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	4 mm	Not Qualified			1		NO				5 mm		6000 ns
DS125BR111RTWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	2						DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			3 V	.5 mm	85 Cel	2.5 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm				1		YES	e3	30	260	4 mm
DS125BR111RTWT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	2						DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			3 V	.5 mm	85 Cel	2.5 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm				1		YES	e3	30	260	4 mm
DS110DF1610FB/NOPB	Texas Instruments	LINE TRANSCEIVER	OTHER	BALL	196	BGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	16				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			GRID ARRAY		2.375 V			2.375 V	1 mm	85 Cel	2.5 V		-10 Cel	4	TIN SILVER COPPER	BOTTOM	S-PBGA-B196	4	2.94 mm	15.05 mm				4		YES	e1	30	245	15.05 mm
DS110DF1610FBE/NOPB	Texas Instruments	LINE TRANSCEIVER	OTHER	BALL	196	BGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	16				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			GRID ARRAY		2.375 V			2.375 V	1 mm	85 Cel	2.5 V		-10 Cel	4	TIN SILVER COPPER	BOTTOM	S-PBGA-B196	4	2.94 mm	15.05 mm				4		YES	e1	30	245	15.05 mm
DS125DF111SQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2				GENERAL PURPOSE	333 mA	DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V			3 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm		3 Amp	COMPLEMENTARY	2	ALSO OPERATE 3.3 VOLT SUPPLY	YES	e3	30	260	4 mm
NBSG16VSBAHTBG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1				.145 ns	GENERAL PURPOSE	34 mA	DIFFERENTIAL	2.5 V		+-2.5/+-3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40		Line Driver or Receivers	.0001 Amp	2.375 V	1 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B16		1.4 mm	4 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES				4 mm		.145 ns
TSB41AB3MPFPEP	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6					IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		3 V	.5 mm	125 Cel	3.3 V	DIFFERENTIAL	-55 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
SN65HVD1781DG4	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				200 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		SMALL OUTLINE	SOP8,.25	3.15 V	Line Driver or Receivers		3.15 V	1.27 mm	125 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e4	NOT SPECIFIED	260	4.9 mm	.8 V	200 ns
SN65HVD1781P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				200 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		IN-LINE	DIP8,.3	3.15 V	Line Driver or Receivers		3.15 V	2.54 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp		1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	.8 V	200 ns
SN65HVD1782P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				50 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		IN-LINE	DIP8,.3	3.15 V	Line Driver or Receivers		3.15 V	2.54 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	.8 V	80 ns
ISO15DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
ISO3080DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				1.3 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO3082DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				1.3 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO3082DWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				1.3 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO3086DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				45 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO3086DW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				45 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO3088DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				45 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO3088DWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				45 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO3088DW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				45 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO35DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
ISO35DW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
TSB41BA3APFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		6		CMOS			IEEE 1394		DIFFERENTIAL	3.3 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
TSB81BA3DPFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6		CMOS			IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
DS275SN	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			EIA-232-E		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		NO				4.9 mm		0 ns
ADM3232EARWZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	10 V	1000 ns
ADM3232EARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	10 V	1000 ns
SN65LVDS051PWRG4Q1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BIPOLAR	AEC-Q100	2.7 ns	EIA-644; TIA-644	20 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	2		YES	e4	30	260	5 mm	.247 V	4.5 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.