16 Line Drivers & Receivers 938

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
TB5R1DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	250	9.9 mm		5 ns
TB5R1DWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm		5 ns
TB5R2DWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	250	10.3 mm		5 ns
STUSB06EHTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			300 ns			DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	1.8,3.3		CHIP CARRIER	LCC16,.12SQ,30/20	1.6 V	Line Driver or Receivers	.000005 Amp	3 V	.5 mm	85 Cel	1.8 V		-40 Cel	1		QUAD	S-XQCC-N16		.8 mm	3 mm	Not Qualified	.02 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED	3 mm		300 ns
ADM2486BRW	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			55 ns	EIA-485-A; TIA-485-A; ISO 8482E		DIFFERENTIAL SCHMITT TRIGGER	3 V	5.25 V	3/5,5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers	.00001 Amp	2.7 V	1.27 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0		240	10.3 mm	2.1 V	55 ns
ADM232LJRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			2	INTERNAL CHARGE PUMP	NO	e3	30	260	10.3 mm	10 V	0 ns
TB5D1MLD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			3.5 ns	GENERAL PURPOSE		STANDARD	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	30	250	9.9 mm	.5 V	0 ns
TB5D2HLD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			3.5 ns	GENERAL PURPOSE		STANDARD	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	30	250	9.9 mm	.5 V	0 ns
ADM2483BRW	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			620 ns	EIA-485-A; TIA-485-A; ISO 8482E		DIFFERENTIAL SCHMITT TRIGGER	3 V	5.25 V	3/5,5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers	.00001 Amp	2.7 V	1.27 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0		240	10.3 mm	1.5 V	1050 ns
MAX201EWE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	13.2 V	5,9/13.2		SMALL OUTLINE	SOP16,.4	9 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0			10.3 mm	10 V	10000 ns
MAX3031ECUE-T	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		70 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm
MAX3032EESE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		16 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			9.9 mm
MAX3033ECUE-T	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		70 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm
MAX3041EUE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.75 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm	1.5 V	0 ns
MAX3043CSE-T	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			9.9 mm	1.5 V	0 ns
MAX3045BEUE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.75 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0	20	240	5 mm	1.5 V	0 ns
MAX3094EEUE-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-422; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	2.5 Amp		4			e0	20	240	5 mm		111 ns
MAX3098EACEE-T	Maxim Integrated	LINE RECEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	70 Cel			0 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified			3			e0			4.89 mm		85 ns
MAX3098EBESE-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			3			e0			9.9 mm		85 ns
MAX3221EAE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	1		NO	e0	20	240	6.2 mm	5 V	0 ns
MAX3227CAE-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		1		NO	e0			6.2 mm	10 V	0 ns
MAX3232CWE-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; EIA-562	1 mA	SCHMITT TRIGGER	5 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0			10.3 mm	10 V	0 ns
MAX3232ESE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; EIA-562	1 mA	SCHMITT TRIGGER	5 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0			9.9 mm	10 V	0 ns
MAX3319ECAE-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2				EIA-232		SCHMITT TRIGGER	2.5 V				SMALL OUTLINE, SHRINK PITCH					2.25 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified			2		NO	e0			6.2 mm
MAX3319EEAE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2				EIA-232		SCHMITT TRIGGER	2.5 V				SMALL OUTLINE, SHRINK PITCH					2.25 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified			2		NO	e0			6.2 mm
MAX3453EETE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	BICMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.5 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm	3 mm	Not Qualified	2 Amp		1		YES	e0		245	3 mm		22 ns
MAX4448ESE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				GENERAL PURPOSE		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			9.9 mm	10.4 V	0 ns
MAX9122EUE-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	4 Amp		4			e0	20	245	5 mm		2.7 ns
MAX9129EUE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		3 ns	GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm
ADM202JRWZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		5000 ns	EIA-232-E; V.28	4 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.000025 Amp	4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.72 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	10.3 mm	10 V	5000 ns
NBSG16VSMNG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1			.18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16	1	1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES		30	260	3 mm		.18 ns
ADN4665ARUZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	TSSOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified					YES	e3	30	260	5 mm	.25 V	0 ns
ADN4665ARUZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	TSSOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified					YES	e3	30	260	5 mm	.25 V	0 ns
ADN4665ARZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
ADN4665ARZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
SN65LBC180RGVT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	VQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers	.0001 Amp	4.75 V	.65 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16	2	1 mm	4 mm	Not Qualified	8 Amp		1		YES		30	260	4 mm	1.1 V	33 ns
ADM202EANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	CMOS		1500 ns	EIA-232-E; V.28	18 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		4.57 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e3			19.43 mm	10 V	1000 ns
ADM202EARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		1500 ns	EIA-232-E; V.28	18 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e3	30	260	10.3 mm	10 V	1000 ns
ADM232LJNZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		4.57 mm	7.62 mm	Not Qualified		INVERTED	2	INTERNAL CHARGE PUMP	NO	e3			19.43 mm	10 V	0 ns
ADM3202ARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	7.4 V	1000 ns
ADM3202ARWZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	12 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	10 V	1000 ns
ADM489ARUZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		2000 ns	EIA-422; EIA-485	.074 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp		1		YES	e3	30	260	5 mm	1.5 V	2000 ns
IL3285E	Nve	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			65 ns	EIA-485	7 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.0008 Amp	3 V	1.25 mm	85 Cel	5 V		-40 Cel	1		DUAL	R-PDSO-G16		2.34 mm	7.455 mm	Not Qualified	4 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	1.5 V	150 ns
DS34C86TN/NOPB	National Semiconductor	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		4	CMOS			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	85 Cel		3-STATE	-40 Cel		MATTE TIN	DUAL	R-PDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	6 Amp	INVERTED	4			e3			19.305 mm		30 ns
SN65LVDS051DRQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR	AEC-Q100	2.7 ns	EIA-644; TIA-644	20 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	8 Amp		2		YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	.247 V	4.5 ns
SN65LVDS104PWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		4.2 ns	EIA-644; TIA-644	35 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	5 mm	2 V	4.2 ns
SN65LVDS105PWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		3.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	5 mm	2 V	3.5 ns
ADM1181AARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		1500 ns	EIA-232-E; V.28	18 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e3	30	260	10.3 mm	10 V	1000 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.