20 Line Drivers & Receivers 452

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX3225EAAP	Maxim Integrated	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BICMOS		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	125 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm		5.29 mm	Not Qualified	1.6 Amp		2	NO	e0			7.2 mm	10 V	0 ns
SN65LBC171DWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		BICMOS	12 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482; X3.277	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	3	YES	e4	30	260	12.825 mm	1 V	16 ns
OPA521IRGWT	Texas Instruments	LINE DRIVER	AUTOMOTIVE	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	24 V	1	1			GENERAL PURPOSE		DIFFERENTIAL	15 V	24 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		7 V			7 V	.65 mm	125 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	1	1 mm	2.5 A	5 mm					NO	e4	30	260	5 mm
ADN4654BRWZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.08 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE	SOP20,.4			.000005 Amp	3 V	1.27 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm			COMPLEMENTARY	4	YES			260	12.8 mm		4.5 ns
ADN4655BRWZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE	SOP20,.4			.000005 Amp	3 V	1.27 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm			COMPLEMENTARY	4	YES			260	12.8 mm		4.5 ns
ADN4655BRWZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE	SOP20,.4			.000005 Amp	3 V	1.27 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm			COMPLEMENTARY	4	YES			260	12.8 mm		4.5 ns
ADN4654BRSZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.08 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3			.000005 Amp	3 V	.65 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2 mm		5.3 mm			COMPLEMENTARY	4	YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm		4.5 ns
ADN4654BRSZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.08 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3			.000005 Amp	3 V	.65 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2 mm		5.3 mm			COMPLEMENTARY	4	YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm		4.5 ns
ADN4656BRWZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE	SOP20,.4			.000005 Amp	3 V	1.27 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2.65 mm		7.5 mm			COMPLEMENTARY	4	YES		NOT SPECIFIED	NOT SPECIFIED	12.8 mm		4.5 ns
ADN4656BRWZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE	SOP20,.4			.000005 Amp	3 V	1.27 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2.65 mm		7.5 mm			COMPLEMENTARY	4	YES		NOT SPECIFIED	NOT SPECIFIED	12.8 mm		4.5 ns
ADN4655BRSZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3			.000005 Amp	3 V	.65 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2 mm		5.3 mm			COMPLEMENTARY	4	YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm		4.5 ns
ADN4655BRSZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3			.000005 Amp	3 V	.65 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2 mm		5.3 mm			COMPLEMENTARY	4	YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm		4.5 ns
ADN4656BRSZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3			.000005 Amp	3 V	.65 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2 mm		5.3 mm			COMPLEMENTARY	4	YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm		4.5 ns
ADN4656BRSZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3			.000005 Amp	3 V	.65 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2 mm		5.3 mm			COMPLEMENTARY	4	YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm		4.5 ns
ADN4651BRWZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644-A; TIA-644-A	80 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE	SOP20,.4				3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm				2	YES	e3	30	260	12.8 mm	.25 V	4.5 ns
ADN4652BRWZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644-A; TIA-644-A	80 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE	SOP20,.4				3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm				2	YES	e3	30	260	12.8 mm	.25 V	4.5 ns
ADN4652BRWZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644-A; TIA-644-A	80 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE	SOP20,.4				3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm				2	YES	e3	30	260	12.8 mm	.25 V	4.5 ns
ADN4650BRSZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644-A; TIA-644-A	72 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3				3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2 mm		5.3 mm				2	YES	e3	30	260	7.2 mm	.25 V	4.5 ns
ADN4651BRSZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644-A; TIA-644-A	80 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3				3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	2		DUAL	R-PDSO-G20		2 mm		5.3 mm				2	YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm	.25 V	4.5 ns
ADN4652BRSZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644-A; TIA-644-A	80 mA	DIFFERENTIAL	3.3 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3				3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	2		DUAL	R-PDSO-G20		2 mm		5.3 mm				2	YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm	.25 V	4.5 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.