24 Line Drivers & Receivers 180

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
AD8141ACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3		CMOS		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
AD8141ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3		CMOS		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
AD8141ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3		CMOS		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	1	.8 mm	4 mm	Not Qualified					YES	e3			4 mm		0 ns
AD8142ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3		CMOS		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
AD8142ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3		CMOS		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
DS100BR210SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		2	2				63 mA			2.625 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	2.5 V		-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
DS64BR111SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES			2				63 mA			2.625 V	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY				e3	30	260	4 mm		0 ns
DS64BR111SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES			2				63 mA			2.625 V	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY				e3	30	260	4 mm		0 ns
ADM207AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS	5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0		240	15.4 mm	10 V	5000 ns
ADM209AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS		EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP24,.4	9 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			15.4 mm	10 V	5000 ns
MAX212CAG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	2000 ns	EIA-232-E; V.24; V.28; EIA-562	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			8.2 mm	10 V	700 ns
MAX212CWG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	2000 ns	EIA-232-E; V.24; V.28; EIA-562	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			15.4 mm	10 V	700 ns
MAX212EAG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	2000 ns	EIA-232-E; V.24; V.28; EIA-562	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel		3-STATE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			8.2 mm	10 V	700 ns
SN75186DW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR	5000 ns	EIA-232-E; TIA-232-E; V.28	.1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	SMALL OUTLINE	SOP24,.4	10.8 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	4 Amp	INVERTED	4	LOOP BACK	NO	e4	30	260	15.4 mm	14 V	6000 ns
ADM237LJN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	3		CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e0			29.59 mm	10 V	0 ns
ADM237LJR-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e0		240	15.4 mm	10 V	0 ns
ADM237LAR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e0		240	15.4 mm	10 V	0 ns
AD7306AN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BICMOS	100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e0			30.485 mm	10 V	200 ns
AD7306AR-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS	100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e0		240	15.4 mm	10 V	200 ns
AD7306AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS	100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e0		240	15.4 mm	10 V	200 ns
MAX207ECNG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	3		CMOS		EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0		245	30.545 mm	10 V	10000 ns
MAX207EENG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	3		CMOS		EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDIP-T24	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0		245	30.545 mm	10 V	10000 ns
MAX207ECWG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS		EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0			15.4 mm	10 V	10000 ns
MAX207EEWG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS		EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0		245	15.4 mm	10 V	10000 ns
MAX207ECAG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS		EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.75 V	.65 mm	70 Cel			0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0		245	8.2 mm	10 V	10000 ns
MAX207EEAG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS		EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.75 V	.65 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0		245	8.2 mm	10 V	10000 ns
MAX208ECWG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e0		245	15.4 mm	10 V	10000 ns
MAX208ECAG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e0		245	8.2 mm	10 V	10000 ns
MAX208EEAG-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e0		245	8.2 mm	10 V	10000 ns
AD239JN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS		EIA-232-C; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		IN-LINE	DIP24,.3	10.8 V	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel	12 V		0 Cel	3	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0			30.45 mm	10 V	0 ns
AD236JN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0			30.45 mm	10 V	0 ns
AD236AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0			15.4 mm	10 V	0 ns
SN75162BDW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	20 ns	IEEE-488	110 mA	SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V		.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	.048 Amp	TRUE	8		NO	e4	30	260	15.4 mm		22 ns
MAX236CWG-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			15.4 mm	10 V	10000 ns
MAX236EWG-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			15.4 mm	10 V	10000 ns
MAX238EWG-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e0			15.4 mm	10 V	10000 ns
MAX1490ACPG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS	275 ns	EIA-422; EIA-485	150 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	31.75 mm	1.5 V	225 ns
MAX1490AEPG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS	275 ns	EIA-422; EIA-485	150 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0	20	245	31.75 mm	1.5 V	225 ns
MAX1490BCPG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS	3000 ns	EIA-422; EIA-485	150 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	31.75 mm	1.5 V	3000 ns
MAX1490BEPG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS	3000 ns	EIA-422; EIA-485	150 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	31.75 mm	1.5 V	3000 ns
MAX235CPG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	5			10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS	NO	e0			31.75 mm	10 V	10000 ns
MAX235EPG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	5			10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	5	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS	NO	e0			31.75 mm	10 V	10000 ns
MAX237MRG	Maxim Integrated	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	3		CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel	5	TIN LEAD	DUAL	R-GDIP-T24	1	5.08 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0				10 V	10000 ns
MAX237CNG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3		CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0			30.545 mm	10 V	10000 ns
MAX239CNG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3		CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5,12		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	3	TIN LEAD	DUAL	R-PDIP-T24	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			30.545 mm	10 V	10000 ns
MAX239ENG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3		CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24		SCHMITT TRIGGER	5 V		5,12		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDIP-T24	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			30.545 mm	10 V	10000 ns
MAX236EWG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			15.4 mm	10 V	10000 ns
MAX237CWG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS	10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0			15.4 mm	10 V	10000 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.