28 Line Drivers & Receivers 393

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC10E116FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC10E116FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
ADM211EARUZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	9.7 mm	10 V	2000 ns
MAX3535ECWI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1560 ns	EIA-422; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3,5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0			17.9 mm	1.5 V	855 ns
MAX3535EEWI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1560 ns	EIA-422; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3,5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0	20	240	17.9 mm	1.5 V	855 ns
MXL1535ECWI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1560 ns	EIA-422; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0			17.9 mm	1.5 V	855 ns
MXL1535EEWI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1560 ns	EIA-422; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0			17.9 mm	1.5 V	855 ns
ICL3237IAZ-T	Intersil	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3.15 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.3 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	10.2 mm	10 V	0 ns
MAX3238IDBRQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	BIPOLAR	AEC-Q100		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	5		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		3	ALSO OPERATES AT 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	10 V	0 ns
MAX3238IPWRQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	BIPOLAR	AEC-Q100		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	5		DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified	1.6 Amp		3	ALSO OPERATES AT 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	9.7 mm	10 V	0 ns
SN65LV1224BDB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		TRUE	1		NO	e4	30	260	10.2 mm	2 V	0 ns
AD8322ARUZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e3		260	9.7 mm
ADM211ARSZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	10.2 mm	10 V	5000 ns
ADM211EARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
ADM213ARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	10.2 mm	10 V	5000 ns
ADM213EARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	17.9 mm	10 V	2000 ns
ADM213EARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
ADM241LJRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	17.9 mm	10 V	0 ns
ADM241LJRZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	40	260	17.9 mm	10 V	0 ns
ADM3311EARUZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		2.7 V	.65 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	1000 ns
ADM3311EARUZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		2.7 V	.65 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	1000 ns
ADM560JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	17.9 mm	10 V	2000 ns
MAX3238IPWG4Q1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		AEC-Q100		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	.001 Amp	TRUE	3	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	9.7 mm	10 V	0 ns
MAX3238IPWRG4Q1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		AEC-Q100		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	.001 Amp	TRUE	3	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	9.7 mm	10 V	0 ns
MAX3162ECAI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		800 ns	EIA-232; EIA-422; EIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	2.5 Amp		2		YES	e0			10.2 mm	10 V	150 ns
MAX3162EEAI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		800 ns	EIA-232; EIA-422; EIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	2.5 Amp		2		YES	e0	20	240	10.2 mm	10 V	150 ns
MXL1543BCAI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	BICMOS		3000 ns	EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-449; EIA-530; EIA-530-A	170 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		4.75 V	.65 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	4 Amp		3		YES	e0		245	10.2 mm	10 V	250 ns
MAX3243EIDW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		SMALL OUTLINE	SOP28,.4	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel	5 V		-40 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	17.9 mm	5 V	150 ns
SN75LV4737ADBRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		850 ns	EIA-232-F; TIA-232-F; V.11	20.7 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SOP28,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	2 Amp	COMPLEMENTARY	5	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	10.2 mm	10.5 V	200 ns
ADM213EARUZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3		260	9.7 mm	10 V	2000 ns
ADM241LARSZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	10.2 mm	10 V	0 ns
ADM241LARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	10.2 mm	10 V	0 ns
ADM241LARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	17.9 mm	10 V	0 ns
ADM241LJRSZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel		3-STATE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	10.2 mm	10 V	0 ns
ADM5170APZ	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
ADM561JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
AD8326AREZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	1.05 mm	4.4 mm	Not Qualified					YES	e3			9.7 mm		0 ns
ADM213ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	10 V	5000 ns
ADM560JRZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	17.9 mm	10 V	2000 ns
ADM561JRZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
ADM211ARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	10 V	5000 ns
ADM3307EARUZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-232	4.5 mA	SCHMITT TRIGGER	3.3 V		3/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		2.7 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	9.7 mm	10 V	1000 ns
ADM3307EARUZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-232	4.5 mA	SCHMITT TRIGGER	3.3 V		3/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		2.7 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	9.7 mm	10 V	1000 ns
ADM5170APZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
ADM5170JNZ	Analog Devices	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	11 V	1	CMOS		15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.000001 Amp	9 V	2.54 mm	70 Cel		3-STATE	0 Cel	8	MATTE TIN	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3			37.4 mm	9 V	0 ns
MAX3238IDBQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	BIPOLAR	AEC-Q100		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	5		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		3	ALSO OPERATES AT 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	10 V	0 ns
MAX3238IPWQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	BIPOLAR	AEC-Q100		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	.001 Amp	TRUE	3	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	9.7 mm	10 V	0 ns
MC100E116FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	40 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.