48 Line Drivers & Receivers 85

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	No. of Bits	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75LVDS84DGGRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					EIA-644; TIA-644	100 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	12.5 mm		0 ns
MAX9250ECM	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS				GENERAL PURPOSE	89 mA	STANDARD	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	QUAD	S-XQFP-G48		1.6 mm	7 mm	Not Qualified			1		YES	e0		245	7 mm		0 ns
SN65MLVD048RGZT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			6 ns	EIA-899; TIA-899	94 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	7 mm		6 ns
DIX9211PT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	38 mA	SCHMITT TRIGGER	3.3 V	3.6 V		FLATPACK, LOW PROFILE, FINE PITCH		2.9 V			2.9 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1		NO	e4	30	260	7 mm		0 ns
SN75C23243DGGR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3					EIA-232-F; TIA-232-F	2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	1.6 Amp	TRUE	10	ALSO OPERATE WITH SUPPLY VOLTAGE OF 5V	YES	e4	NOT SPECIFIED	260	12.5 mm	10 V	0 ns
SN75C23243DL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	6					EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp	3 V	.635 mm	70 Cel			0 Cel	6	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	1.6 Amp		10	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	15.875 mm	10 V	0 ns
SN65LVDS86AQDGGR	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e4	30	260	12.5 mm		7 ns
74LVC161284TTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			9 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel			-40 Cel	8	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G48	3	1.2 mm	6.1 mm	Not Qualified			8		NO	e3	30	260	12.5 mm		9 ns
MAX9220EUM	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS				EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4		NO	e0			12.5 mm		0 ns
SN65MLVD128DGG	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			3 ns	EIA-899; TIA-899	140 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	12.5 mm		3 ns
MAX9213ETM-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS				EIA-644; TIA-644		STANDARD	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified					YES	e0			7 mm		0 ns
MAX9220EUM-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS				EIA-644; TIA-644		DIFFERENTIAL	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified			4		NO	e0	20	240	12.5 mm		0 ns
SN65LVDS86AQDGGRG4	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified	.025 Amp	TRUE	3		NO	e4	30	260	12.5 mm		7 ns
SN65LVDS95DGGRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100			EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
SN65LVDS95DGGRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
SN65LVDS96DGGRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS				EIA-644; TIA-644	82 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified	.02 Amp	TRUE	3		NO	e4	30	260	12.5 mm		0 ns
MAX9218ECM	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				GENERAL PURPOSE	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e0			7 mm		0 ns
MAX9218ETM	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS				GENERAL PURPOSE	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	CHIP CARRIER, VERY THIN PROFILE	LCC48,.24SQ,16		Line Driver or Receivers		3 V	.4 mm	85 Cel			-40 Cel		TIN LEAD	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1			e0			6 mm		0 ns
TSB41AB1PHPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS				IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			2		YES	e4	30	260	7 mm	.172 V	0 ns
74LVC161284DGGRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		19	40 ns	IEEE 1284	45 mA	SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V	3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	84 Amp	TRUE	8	CONTAINS 5 DRIVERS, 4 RECEIVERS AND EIGHT BI-DIRECTIONAL LINES	NO	e4	30	260	12.5 mm		40 ns
74LVC161284DLRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			40 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V		0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.5 mm	Not Qualified			8	CONTAINS 5 DRIVERS, 4 RECEIVERS AND EIGHT BI-DIRECTIONAL LINES	NO	e4	30	260	15.875 mm		40 ns
SN65MLVD128DGGR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			3 ns	EIA-899; TIA-899	140 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	12.5 mm		3 ns
SN65MLVD129DGGR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			3 ns	EIA-899; TIA-899	140 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY	2		YES	e4	30	260	12.5 mm		3 ns
SN75LVDS84ADGGRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS				EIA-644; TIA-644	39 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified					YES	e4	NOT SPECIFIED	260	12.5 mm		0 ns
SN75LVDS86ADGGG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		INVERTED	3		NO	e4	30	260	12.5 mm		7 ns
SN75LVDS86ADGGRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			3		NO	e4	NOT SPECIFIED	260	12.5 mm		7 ns
74LVCE161284DLRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13			19	30 ns	IEEE-1284	45 mA	STANDARD	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V	3-STATE	0 Cel	14	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	84 Amp	TRUE	13		NO	e4	NOT SPECIFIED	260	15.875 mm		18 ns
SN74LVC161284DLG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		19	40 ns	IEEE 1284	45 mA	SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V	3-STATE	0 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.79 mm	7.5 mm	Not Qualified	84 Amp		8	CONTAINS 5 DRIVERS, 4 RECEIVERS AND EIGHT BI-DIRECTIONAL LINES	NO	e4	NOT SPECIFIED	260	15.875 mm		40 ns
SN65LVDS95DGGG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
DS90UB936TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2		AEC-Q100			ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N48	3	1 mm	7 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155	NO	e4	30	260	7 mm
DS90UB924TRHSRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm
DIX4192IPFBRQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.95 V		FLATPACK, THIN PROFILE, FINE PITCH		1.65 V			3 V	.5 mm	85 Cel	1.8 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	2	1.2 mm	7 mm				1		YES	e4	30	260	7 mm
DS90UB934TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2		AEC-Q100			ISO 10605		DIFFERENTIAL	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm				2		NO	e4	30	260	7 mm
THCV234	Thine Electronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	5					GENERAL PURPOSE		DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.7 V	.5 mm	105 Cel			-40 Cel	5		QUAD	S-XQCC-N48		.85 mm	7 mm				5		YES				7 mm
TDES954RGZR	Texas Instruments	LINE RECEIVER	OTHER	NO LEAD	48	HQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1						279 mA	DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20			.00019 Amp	1.71 V	.5 mm	85 Cel		OPEN-DRAIN	-20 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm		.035 Amp	INVERTED	1		YES	e4	30	260	7 mm
DS90UB638TRGZTQ1	Texas Instruments	LINE RECEIVER		NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	1		AEC-Q100			GENERAL PURPOSE	205 mA	DIFFERENTIAL	1.1 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20			.00019 Amp	1.045 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm		2 Amp		1		NO	e4		260	7 mm
DS90UB638TRGZRQ1	Texas Instruments	LINE RECEIVER		NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	1		AEC-Q100			GENERAL PURPOSE	205 mA	DIFFERENTIAL	1.1 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20			.00019 Amp	1.045 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm		2 Amp		1		NO	e4		260	7 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.