56 Line Drivers & Receivers 36

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65HVD09IDGGREP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				13.5 ns	EIA-422; EIA-485	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.5 mm	85 Cel	5 V	3-STATE	-40 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm		8 Amp	TRUE	9		YES	e4	30	260	14 mm	4 V	14.5 ns
DS90CR286AQMT/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			AEC-Q100		EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4			e3	30	260	14 mm		0 ns
DS90CR286AQMTX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			AEC-Q100		EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4			e3	30	260	14 mm		0 ns
DS90CF384AQMT/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4			AEC-Q100			105 mA		3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		NO	e3	30	260	14 mm		0 ns
DS90CF384AQMTX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS	AEC-Q100			105 mA		3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		NO	e3	30	260	14 mm		0 ns
SN75976A1DGG	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		BICMOS		13.5 ns	X3.129; X3.131; X3.277; EIA-485; SCSI-2; ISO 8482; IPI	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.5 mm	70 Cel	5 V	3-STATE	0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified	8 Amp	COMPLEMENTARY	9	COMMON I/O; ADDITIONAL COMMON ENABLE INPUT	YES	e4	30	260	14 mm	1 V	16.5 ns
SN75976A2DL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		BICMOS		11.5 ns	X3.129; X3.131; X3.277; EIA-485; SCSI-2; ISO 8482; IPI	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE, SHRINK PITCH	SSOP56,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.635 mm	70 Cel	5 V	3-STATE	0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	2.79 mm	7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	9	COMMON I/O; ADDITIONAL COMMON ENABLE INPUT	YES	e4	30	260	18.415 mm	1 V	14.5 ns
SN75LBC968DL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		BICMOS		45 ns	X3.131; SCSI-2; SCSI-3	45 mA	SCHMITT TRIGGER	5 V	5.25 V		SMALL OUTLINE, SHRINK PITCH		4.75 V		.0001 Amp	4.75 V	.635 mm	70 Cel	5 V		0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	2.79 mm	7.5 mm	Not Qualified	48 Amp	INVERTED	9		NO	e4	30	260	18.415 mm		25 ns
SN75LBC970ADL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		CMOS		26.6 ns	EIA-485; SCSI-2	94 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP56,.4		Line Driver or Receivers	.0001 Amp	4.75 V	.635 mm	70 Cel			0 Cel	9		DUAL	R-PDSO-G56		2.79 mm	7.5 mm	Not Qualified	60 Amp	COMPLEMENTARY	9		YES		NOT SPECIFIED	NOT SPECIFIED	18.415 mm	2 V	36.2 ns
SN75LBC971ADL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		CMOS		25.3 ns	EIA-485; SCSI-2	33 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP56,.4		Line Driver or Receivers	.0001 Amp	4.75 V	.635 mm	70 Cel			0 Cel	9		DUAL	R-PDSO-G56		2.79 mm	7.5 mm	Not Qualified	60 Amp	COMPLEMENTARY	9		YES		NOT SPECIFIED	NOT SPECIFIED	18.415 mm	2 V	36.2 ns
SN75LBC978DLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		BICMOS		26.4 ns	X3.131; EIA-485; SCSI-2; SCSI-3; ISO 8482	45 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP56,.4		Line Driver or Receivers	.0001 Amp	4.75 V	.635 mm	70 Cel		3-STATE	0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	2.79 mm	7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	9	COMMON I/O; ADDITIONAL COMMON ENABLE INPUT	YES	e4	30	260	18.415 mm	1 V	30.7 ns
SN65LVDS93DGG	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		13.38 ns	EIA-644; TIA-644	120 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
SN75LVDM976DGGR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		CMOS		8.8 ns	X3.277; SCSI-2; SCSI-3	26 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers	.00005 Amp	4.75 V	.5 mm	70 Cel			0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified	2 Amp		9	SUPPORTS SINGLE-ENDED AND LOW-VOLTAGE DIFFERENTIAL SCSI	YES	e4	30	260	14 mm	.9 V	10 ns
SN75970B1DGG	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9				17.7 ns	X3.131; X3.277; EIA-485; SCSI-2; SCSI-3; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.5 mm	70 Cel			0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified			9		YES	e4			14 mm		18 ns
SN75970B2DGG	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9				15.7 ns	X3.131; X3.277; EIA-485; SCSI-2; SCSI-3; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.5 mm	70 Cel			0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified			9		YES	e4	30	260	14 mm		14.6 ns
SN75971B1DGG	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9				12.9 ns	X3.131; X3.277; EIA-485; SCSI-2; SCSI-3; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.5 mm	70 Cel			0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified			9		YES	e4			14 mm		16.1 ns
SN75971B2DLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9				12 ns	X3.131; X3.277; EIA-485; SCSI-2; SCSI-3; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					4.75 V	.635 mm	70 Cel			0 Cel	9		DUAL	R-PDSO-G56		2.79 mm	7.5 mm	Not Qualified			9		YES		NOT SPECIFIED	NOT SPECIFIED	18.415 mm		15 ns
SN55976A1WD	Texas Instruments	LINE TRANSCEIVER	MILITARY	FLAT	56	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	9		BICMOS	MIL-PRF-38535	15 ns	X3.129; X3.131; X3.277; EIA-485; SCSI-2; ISO 8482; IPI	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	FLATPACK	FL56,.4,25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.635 mm	125 Cel	5 V		-55 Cel	9	TIN LEAD	DUAL	R-GDFP-F56		3.05 mm	9.652 mm	Not Qualified	8 Amp		9	COMMON I/O; ADDITIONAL COMMON ENABLE INPUT	YES	e0			18.415 mm	.7 V	19 ns
CY7C68000A-56LFXC	Cypress Semiconductor	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	56	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		STANDARD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	70 Cel			0 Cel	1	Matte Tin (Sn)	QUAD	S-XQCC-N56	3	1 mm	8 mm	Not Qualified			1			e3	20	260	8 mm		0 ns
SN75DP128ARTQT	Texas Instruments	LINE TRANSCEIVER	OTHER	NO LEAD	56	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	2			.28 ns		65 mA	DIFFERENTIAL	5 V	5.25 V	5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.31SQ,20	4.5 V	Other Interface ICs	.00001 Amp	4.5 V	.5 mm	85 Cel	5 V	DIFFERENTIAL	0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N56	3	1 mm	8 mm	Not Qualified		COMPLEMENTARY	4		YES	e4	30	260	8 mm		.28 ns
STLVDS385BTR	STMicroelectronics	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					EIA-644; TIA-644		STANDARD	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Other Interface ICs		3 V	.5 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G56	3	1.2 mm	6.1 mm	Not Qualified					YES	e3	30	260	14 mm		0 ns
SN75976A2DGGG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		BICMOS		11.5 ns	X3.129; X3.131; X3.277; EIA-485; SCSI-2; ISO 8482; IPI	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.5 mm	70 Cel	5 V	3-STATE	0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified	.1 Amp	COMPLEMENTARY	9	COMMON I/O; ADDITIONAL COMMON ENABLE INPUT	YES	e4	30	260	14 mm	1 V	14.5 ns
SN75LVDM977DGGG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		CMOS		8.8 ns	X3.277; SCSI-2; SCSI-3	26 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers	.00005 Amp	4.75 V	.5 mm	70 Cel			0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified	2 Amp		9	SUPPORTS SINGLE-ENDED AND LOW-VOLTAGE DIFFERENTIAL SCSI	YES	e4	30	260	14 mm	.9 V	10 ns
SN65LVDS93DGGRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		13.38 ns	EIA-644; TIA-644	120 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified	.02 Amp	COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
SN65LVDS94DGGRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	84 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY	4		NO	e4	30	260	14 mm		0 ns
SN75LVDS82DGGG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	7		NO	e4	30	260	14 mm		0 ns
SN75LVDS82DGGRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	107 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE	7		NO	e4	30	260	14 mm		0 ns
SN75LVDS83DGGG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE			YES	e4	30	260	14 mm		0 ns
SN75LVDS83DGGRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		TRUE			YES	e4	30	260	14 mm		0 ns
SN65HVD09DGG	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				13.5 ns	RS-485; RS-422	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.5 mm	85 Cel	5 V	3-STATE	-40 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified	8 Amp	TRUE	9		YES	e4	30	260	14 mm	1 V	14.5 ns
SN75976A1DLG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		BICMOS		13.5 ns	X3.129; X3.131; X3.277; EIA-485; SCSI-2; ISO 8482; IPI	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE, SHRINK PITCH	SSOP56,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.635 mm	70 Cel	5 V	3-STATE	0 Cel	9	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G56	2	2.79 mm	7.5 mm	Not Qualified	.1 Amp	COMPLEMENTARY	9	COMMON I/O; ADDITIONAL COMMON ENABLE INPUT	YES	e4	NOT SPECIFIED	260	18.415 mm	1 V	16.5 ns
SN65LVDS94DGGG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	84 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY	4		NO	e4	30	260	14 mm		0 ns
SN65LVDS93DGGG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		13.38 ns	EIA-644; TIA-644	120 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified	.02 Amp	COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
SN65LVDS93BDGGR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					GENERAL PURPOSE		STANDARD	3.3 V	3.6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm						YES	e4	30	260	14 mm
SN65LVDS93BDGG	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					GENERAL PURPOSE		STANDARD	3.3 V	3.6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm						YES	e4	30	260	14 mm
SN65LVDS93BIDGGRQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			AEC-Q100		GENERAL PURPOSE		STANDARD	3.3 V	3.6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm						YES	e4	30	260	14 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.