80 Line Drivers & Receivers 25

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SP505	Sipex			GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS				5 V		5	FLATPACK	QFP80,.7SQ		Line Driver or Receivers			.635 mm					7	TIN LEAD	QUAD	S-PQFP-G80	3			Not Qualified	3.2 Amp				YES	e0		225			500 ns
ADS58C48IPFPR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1.9 V	4		GENERAL PURPOSE	330 mA	DIFFERENTIAL	1.8 V	1.9 V		FLATPACK		1.7 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	R-PQFP-G80	3	1.2 mm	12 mm	Not Qualified			4		YES	e4	30	260	12 mm		7.5 ns
TSB41AB3PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS	IEEE 1394	1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	30	260	12 mm	.172 V	0 ns
SN65LVDS305ZQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1	CMOS	GENERAL PURPOSE	18.8 mA	STANDARD	1.8 V		1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B80		1 mm	5 mm	Not Qualified					YES	e1			5 mm		0 ns
SN65LVDS301ZQER	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1	CMOS	GENERAL PURPOSE	36.8 mA	DIFFERENTIAL	1.8 V	1.95 V	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm	5 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	5 mm		0 ns
SN65LVDS301ZQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1	CMOS	GENERAL PURPOSE	36.8 mA	DIFFERENTIAL	1.8 V	1.95 V	1.8	GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm	5 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	5 mm		0 ns
TUSB6020PFCR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		GENERAL PURPOSE		STANDARD	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	4	1.2 mm	12 mm	Not Qualified			1	IT ALSO NEED 1.5V DIGITAL CORE SUPPLY VOLTAGE	NO	e4	30	260	12 mm		0 ns
TUSB6020PFC	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		GENERAL PURPOSE		STANDARD	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	4	1.2 mm	12 mm	Not Qualified			1	IT ALSO NEED 1.5V DIGITAL CORE SUPPLY VOLTAGE	NO	e4	30	260	12 mm		0 ns
TUSB6020ZQER	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		GENERAL PURPOSE		STANDARD	3.3 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm	5 mm	Not Qualified			1	IT ALSO NEED 1.5V DIGITAL CORE SUPPLY VOLTAGE	NO	e1	30	260	5 mm		0 ns
TSB41AB3MPFPEP	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		3 V	.5 mm	125 Cel	3.3 V	DIFFERENTIAL	-55 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
TSB41BA3APFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		6	CMOS	IEEE 1394		DIFFERENTIAL	3.3 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
TSB81BA3DPFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS	IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3EIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		3	CMOS		150 mA			3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3EPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		3	CMOS		150 mA			3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
TSB41AB3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS	IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4			12 mm	.172 V	0 ns
TSB81BA3PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS	IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
TSB41BA3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6		IEEE 1394		DIFFERENTIAL	3.3 V		1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
TSB81BA3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS	IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	85 Cel	3.3 V		-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
TSB41BA3DIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	80	HQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2		IEEE 1394B	150 mA	DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3	CHIP CARRIER, HEAT SINK/SLUG	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.75 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	2		YES	e4	30	260	12 mm	.172 V	0 ns
TSB41BA3DPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	80	HQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2		IEEE 1394B	150 mA	DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3	CHIP CARRIER, HEAT SINK/SLUG	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.7 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	2		YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3IPFPEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS	IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	85 Cel	3.3 V		-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	30	260	12 mm	.172 V	0 ns
TSB41BA3ATPFPEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2 V	6		IEEE 1394		DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.75 V	.5 mm	110 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3PFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS	IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
TSB41AB3PFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS	IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
SN65LVDS302ZXH	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		GENERAL PURPOSE	68 mA	DIFFERENTIAL	1.8 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20			.00002 Amp	1.65 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm	5 mm		2 Amp	TRUE	3		NO	e1	30	260	5 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.