SOP Line Drivers & Receivers 1,345

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM561JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
ADM213ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS	5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	10 V	5000 ns
ADM489ARZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	2000 ns	EIA-422; EIA-485	.074 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	2000 ns
ADM560JRZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	17.9 mm	10 V	2000 ns
ADM561JRZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
ADM211ARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS	5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	10 V	5000 ns
MC100EP16FDG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.26 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.26 ns
MC100EP16VADG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.34 ns
MC100EP16VADR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.34 ns
MC100EP16VCDG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.4 ns
MC100EP16VSDG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.28 ns
MC100EP16VTDR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.35 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.35 ns
MC100EP17DWG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL	.32 ns	GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	4	TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	12.8 mm		.32 ns
MC100LVEL17DWG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	4	ECL		GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-3.3/-5,3.3/5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e3	30	260	12.8 mm		.55 ns
MC10EP16DG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.28 ns
MC10EP16VADG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.34 ns
MC10EP16VADR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.34 ns
MC10EP17DWG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL	.3 ns	GENERAL PURPOSE	68 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	4	TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	12.8 mm		.3 ns
MC10EP89DG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		0 ns
MC10EP89DR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm	1.4 V	0 ns
MC10H115MELG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	ECL		GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified			4		NO	e4		260	10.2 mm		1.3 ns
MC10H116MG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3			GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.23		Line Driver or Receivers	.000095 Amp		1.27 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified		COMPLEMENTARY	3		YES	e4		260	10.2 mm		1.45 ns
MC10SX1189DG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	9.9 mm		.5 ns
MC10SX1189DR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			1		YES	e3		260	9.9 mm		.5 ns
MC1489DG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel			0 Cel		Tin (Sn)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e3	40	260	8.65 mm		85 ns
MC1489DR2G	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel			0 Cel		Tin (Sn)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e3	40	260	8.65 mm		85 ns
MC1489MG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel			0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	3	2.05 mm	5.275 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e4	40	260	10.2 mm		85 ns
MC3488ADG	Onsemi	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2	BIPOLAR	140000 ns	EIA-232-D; X.26; X.28; EIA-423; FED STD 1030		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel			0 Cel	2	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e3	30	260	4.9 mm	8 V	0 ns
MC3488ADR2G	Onsemi	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2	BIPOLAR	140000 ns	EIA-232-D; X.26; X.28; EIA-423; FED STD 1030		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	DIP8,.3		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel			0 Cel	2	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e3	30	260	4.9 mm	8 V	0 ns
MC75174BDWG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin (Sn)	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified					YES	e3	40	260	12.8 mm	1.5 V	0 ns
MC75174BDWR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin (Sn)	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified					YES	e3	40	260	12.8 mm	1.5 V	0 ns
NCV7361ADG	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1		4000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	12 V				SMALL OUTLINE					5.25 V	1.27 mm	125 Cel			-40 Cel	1	Tin (Sn)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		NO	e3	40	260	4.9 mm		6000 ns
TB5R3LDW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e0	20	220	10.3 mm		3.5 ns
AM26LV32CDG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp		4		NO	e4	30	260	9.9 mm		20 ns
AM26LV32IDE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp	TRUE	4		NO	e4	30	260	9.9 mm		20 ns
AM26LV32INSR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.3	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	5 Amp	TRUE	4		NO	e4	30	260	10.2 mm		20 ns
AM26LV32INS	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.3	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	5 Amp	TRUE	4		NO	e4	30	260	10.2 mm		20 ns
SN65MLVD047DR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS	2.4 ns	EIA-899; TIA-899	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.48 V	0 ns
SN65MLVD202AD	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.899 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm	2 V	6 ns
SN65MLVD205ADG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.899 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm	2 V	6 ns
SN65MLVD205AD	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.899 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm	2 V	6 ns
SN65HVD33DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	18 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	60 Amp	COMPLEMENTARY	1	SIGNALING RATE 25MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	45 ns
SN65HVD33D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	18 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	60 Amp	COMPLEMENTARY	1	SIGNALING RATE 25MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	45 ns
SN65HVD34D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	65 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	6.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	60 Amp	TRUE	1	SIGNALING RATE 5MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	70 ns
SN65HVD35DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	305 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	6.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	60 Amp	TRUE	1	SIGNALING RATE 1MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	70 ns
SN65HVD35DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	305 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	6.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	60 Amp	TRUE	1	SIGNALING RATE 1MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	70 ns
SN65HVD35D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	305 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	6.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	60 Amp	TRUE	1	SIGNALING RATE 1MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	70 ns
SN65HVD53DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	12 ns	EIA-485-A; TIA-485-A	2.7 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 25 MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.7 V	40 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.