RECTANGULAR Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX3033EEUE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		70 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm		4.4 mm	Not Qualified					YES	e0			5 mm	2 V	0 ns
MAX3070EAPD	Maxim Integrated	LINE TRANSCEIVER	AUTOMOTIVE	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.63 V	1		BICMOS		1500 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		IN-LINE	DIP14,.3		Line Driver or Receivers		2.97 V	2.54 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T14	1	4.572 mm		7.62 mm	Not Qualified	1 Amp		1		YES	e0			19.05 mm	1.5 V	200 ns
MAX3070EEPD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.63 V	1		BICMOS		1500 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		IN-LINE	DIP14,.3		Line Driver or Receivers		2.97 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T14	1	4.572 mm		7.62 mm	Not Qualified	1 Amp		1		YES	e0			19.05 mm	1.5 V	200 ns
MAX3071EASA	Maxim Integrated	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1		BICMOS		1500 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified	1 Amp		1		YES	e0			4.9 mm	1.5 V	200 ns
MAX3072EASA	Maxim Integrated	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1		BICMOS		1500 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified	1 Amp		1		YES	e0			4.9 mm	1.5 V	200 ns
MAX3074EASA	Maxim Integrated	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1		BICMOS		800 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified	1 Amp		1		YES	e0			4.9 mm	1.5 V	200 ns
MAX3074EESA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1		BICMOS		800 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	1 Amp		1		YES	e0	20	240	4.9 mm	1.5 V	200 ns
MAX3078EESA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1		BICMOS		50 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	1 Amp		1		YES	e0	20	240	4.9 mm	1.5 V	75 ns
MAX3079EEPD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.63 V	1		BICMOS		800 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		IN-LINE	DIP14,.3		Line Driver or Receivers		2.97 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T14	1	4.572 mm		7.62 mm	Not Qualified	1 Amp		1		YES	e0			19.05 mm	1.5 V	200 ns
SN65HVD08D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	70 ns
SN65HVD08P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		IN-LINE	DIP8,.3	3 V	Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
SN75HVD08P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		IN-LINE	DIP8,.3	3 V	Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	70 Cel		3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
MAX3441EAPA	Maxim Integrated	LINE TRANSCEIVER	AUTOMOTIVE	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BICMOS		2000 ns	EIA-422; EIA-485	10 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T8		4.572 mm		7.62 mm	Not Qualified	1 Amp		1		YES	e0		245	9.375 mm	1.5 V	2000 ns
MAX3441EEPA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BICMOS		2000 ns	EIA-422; EIA-485	10 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T8		4.572 mm		7.62 mm	Not Qualified	1 Amp		1		YES	e0		245	9.375 mm	1.5 V	2000 ns
MAX3444EESA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		2000 ns	EIA-422; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	1 Amp		1		YES	e0		245	4.9 mm	1.5 V	2000 ns
SN65HVD20P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS		20 ns	EIA-485-A; TIA-485-A	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.4	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.8 V	35 ns
SN65HVD22P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS		500 ns	EIA-485-A; TIA-485-A	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.4	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.8 V	50 ns
NB100LVEP17MN	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	VQCCN	RECTANGULAR	UNSPECIFIED	YES	5.5 V	4		ECL		.325 ns	GENERAL PURPOSE	55 mA	DIFFERENTIAL	2.5 V		-4.5	-4.5 V	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	R-XQCC-N24		1 mm		4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -2.375V TO -5.5V IN NECL MODE	YES	e0		235	4 mm		.325 ns
ST3241EBDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3					EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm		7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	10 V	0 ns
ST3241EBTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3					EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		1.2 mm		4.4 mm	Not Qualified	1.6 Amp		5		NO	e4		260	9.7 mm	10 V	0 ns
ST3241ECDR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3					EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm		7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	10 V	0 ns
SN65LBC176AQDREP	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		12 ns	EIA-485-A; TIA-485-A; ISO 8482	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	30	260	4.9 mm	.9 V	30 ns
THS6182DR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES WITH 24V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		0 ns
THS6182DWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G20		2.65 mm		7.5 mm	Not Qualified				ALSO OPERATES WITH 24V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	12.8 mm		0 ns
THS6182PWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		STANDARD	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		5 V	.65 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G20		1.2 mm		4.4 mm	Not Qualified				CAN ALSO OPERATE WITH SINGLE SUPPLY OF 10V TO 30V	NO				6.5 mm		0 ns
THS6182RHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	5 V	Line Driver or Receivers		5 V	.5 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N24	2	1 mm	.6 A	4 mm	Not Qualified		TRUE		ALSO OPERATES WITH 24V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
ST485ABN	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				30 ns	EIA-422; EIA-485	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8		4.8 mm		7.62 mm	Not Qualified	4 Amp		1		YES	e3				1.5 V	30 ns
MAX9163ESA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		5 ns	GENERAL PURPOSE	20 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	2 Amp		1		YES	e0			4.9 mm	.18 V	12 ns
ADM1486AR-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		17 ns	EIA-422; EIA-485	2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	4 Amp		1		YES	e0		240	4.9 mm	2.1 V	20 ns
ADM202EARN-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		1500 ns	EIA-232-E; V.28	18 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e0		240	9.9 mm	10 V	1000 ns
ADM202EARU-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		1500 ns	EIA-232-E; V.28	18 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e0		240	5 mm	10 V	1000 ns
ADM3202ARU-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	1.6 Amp		2		NO	e0		240	5 mm	5 V	1000 ns
ADM3222ARS-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2 mm		5.3 mm	Not Qualified	1.6 Amp		2		NO	e0		240	7.2 mm	5 V	1000 ns
ADM3222ARU-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.2 mm		4.4 mm	Not Qualified	1.6 Amp		2		NO	e0		240	6.5 mm	5 V	1000 ns
ADM3222ARW-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP18,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G18	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp		2		NO	e0		240	11.55 mm	5 V	1000 ns
ADM1486AR-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		17 ns	EIA-422; EIA-485	2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	4 Amp		1		YES	e0		240	4.9 mm	2.1 V	20 ns
ADM208EARU-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24		1.2 mm		4.4 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e0			7.8 mm	10 V	2000 ns
MAX3238EEAI-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3					EIA-232; TIA-232; V.24; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm		5.29 mm	Not Qualified	1 Amp		3		NO	e0			10.2 mm	10 V	0 ns
MAX3241EEWI-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp		5		NO	e0			17.9 mm	10 V	0 ns
ST3384EBDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP18,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G18		2.65 mm		7.5 mm	Not Qualified	2 Amp		2		NO	e4			11.55 mm	5 V	0 ns
ST485ERBN	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1				60 ns	EIA-422; EIA-485	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8	1	4.8 mm		7.62 mm	Not Qualified	4 Amp		1		YES	e3	30	260		1.5 V	210 ns
ST490ABN	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				16 ns	EIA-422; EIA-485	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8		4.8 mm		7.62 mm	Not Qualified	8 Amp		1		YES	e3				1.5 V	30 ns
ST490ACN	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				16 ns	EIA-422; EIA-485	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDIP-T8		4.8 mm		7.62 mm	Not Qualified	8 Amp		1		YES	e3				1.5 V	30 ns
ST491ACDR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				16 ns	EIA-422; EIA-485	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified	8 Amp		1		YES	e4			8.65 mm	1.5 V	30 ns
ST491ACN	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				16 ns	EIA-422; EIA-485	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDIP-T14		5.1 mm		7.62 mm	Not Qualified	8 Amp		1		YES	e3				1.5 V	30 ns
FIN1027AM	Fairchild Semiconductor	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e3			4.9 mm	.25 V	0 ns
SN65C3223PW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BIPOLAR			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	1.2 mm		4.4 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	6.5 mm	10 V	0 ns
SN65LVDM051QDQ1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100	3 ns	EIA-644; TIA-644	27 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		2		YES	e4	30	260	9.9 mm	.247 V	4.5 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.