SQUARE Line Drivers & Receivers 498

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC100EL16DTR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL		GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC100EL16DT	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL		GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC100EP16VCDTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.4 ns
MC100EP16VCDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0	30	235	3 mm		.4 ns
MC10EL16DTR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL		GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC10EL16DT	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL		GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC10EP16TDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		ECL	.3 ns	GENERAL PURPOSE	31 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.3 ns
SN65LVDS9638DGK	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	3 mm	.247 V	0 ns
SN65LVDS9637DGK	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	3 mm		3 ns
MAX9129EGE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	NO LEAD	16	VQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS	3 ns	GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, VERY THIN PROFILE					3 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQCC-N16	1	1 mm	4 mm	Not Qualified					YES	e0			4 mm		0 ns
TSB41AB3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6		CMOS		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4			12 mm	.172 V	0 ns
MAX9400EHJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR	.437 ns	GENERAL PURPOSE	118 mA	DIFFERENTIAL	3.3 V		2.5/5		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP32,.28SQ		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			4		YES	e0			5 mm		.437 ns
MAX9404EHJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR		GENERAL PURPOSE	118 mA	DIFFERENTIAL	3.3 V		3.3/5		FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			4		YES	e0			5 mm		0 ns
ADM101EARM-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		EIA-232	1 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		Line Driver or Receivers		4.5 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified	1.6 Amp		1		NO	e0		240	3 mm	6.5 V	5000 ns
ADM5170AP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1		CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
ADM5170JP-REEL	Analog Devices	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1		CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
MAX4361EUA	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified					NO	e0			3 mm		0 ns
MAX4362EUB	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.5 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified					NO	e0			3 mm		0 ns
MAX9157EGJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4		CMOS	2.5 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-CQCC-N32	1	1 mm	5 mm	Not Qualified	4 Amp		4		YES	e0			5 mm	.25 V	4.1 ns
SN75LVDS9638DGKR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	2		DUAL	S-PDSO-G8		1.07 mm	3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	3 mm	.247 V	0 ns
MAX9158EGM	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	44	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4		CMOS	2.5 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER, VERY THIN PROFILE	LCC44,.28SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-CQCC-N44	1	.8 mm	7 mm	Not Qualified	4 Amp		4		YES	e0	20	240	7 mm	.25 V	3.5 ns
TLK3101IRCP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	HVFQFP	SQUARE	PLASTIC/EPOXY	YES	2.7 V	1				GENERAL PURPOSE		DIFFERENTIAL	2.5 V				FLATPACK, HEAT SINK/SLUG, VERY THIN PROFILE, FINE PITCH					2.3 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1 mm	10 mm	Not Qualified			1		YES	e4	30	260	10 mm		0 ns
SN65LVDT100DGK	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	.8 ns	EIA-644-A; TIA-644-A	30 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	3 mm		.8 ns
DS125DF1610FB/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	196	BGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	16			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			GRID ARRAY		2.375 V			2.375 V	1 mm	85 Cel	2.5 V		-40 Cel	4	TIN SILVER COPPER	BOTTOM	S-PBGA-B196	4	2.94 mm	15.05 mm				4		YES	e1	30	245	15.05 mm
DS125DF1610FBE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	196	BGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	16			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			GRID ARRAY		2.375 V			2.375 V	1 mm	85 Cel	2.5 V		-40 Cel	4	TIN SILVER COPPER	BOTTOM	S-PBGA-B196	4	2.94 mm	15.05 mm				4		YES	e1	30	245	15.05 mm
MAX3342EEBE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	VFBGA	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	35 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V		2/3.3,5		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA16,4X4,20		Other Interface ICs		4 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	BOTTOM	S-PBGA-B16	1	.67 mm	2.02 mm	Not Qualified			1		YES	e0			2.02 mm		30 ns
TSB81BA3PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6		CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
NBSG16MNR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1		ECL	.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	QUAD	S-XQCC-N16		1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e0	30	235	3 mm		.145 ns
NBSG16MN	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1		ECL	.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	QUAD	S-XQCC-N16		1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e0	30	235	3 mm		.145 ns
NBSG16VSMN	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1			.18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	QUAD	S-XQCC-N16		1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e0	30	235	3 mm		.18 ns
THS6132VFPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	2				GENERAL PURPOSE		STANDARD	5 V	16 V	+-5/+-15	-5 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP32,.35SQ,32	3.3 V	Line Driver or Receivers		3.3 V	.8 mm	85 Cel	15 V		-40 Cel	2		QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
ADM101EARM-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		EIA-232	1 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		Line Driver or Receivers		4.5 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified	1.6 Amp		1		NO	e0		240	3 mm	6.5 V	5000 ns
SN65LVDT101DGKR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	.9 ns	EIA-644-A; TIA-644-A	61 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1		YES	e4	30	260	3 mm		.9 ns
TSB41AB2PAPR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4				IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	9 Amp	COMPLEMENTARY	4		YES	e4	30	260	10 mm	.172 V	0 ns
TSB41BA3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6				IEEE 1394		DIFFERENTIAL	3.3 V		1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
MAX9395EHJ	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	.72 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			1		YES	e0			5 mm		.72 ns
TSB81BA3IPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6		CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	85 Cel	3.3 V		-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
SN75DP128ARTQT	Texas Instruments	LINE TRANSCEIVER	OTHER	NO LEAD	56	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	2		.28 ns		65 mA	DIFFERENTIAL	5 V	5.25 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.31SQ,20	4.5 V	Other Interface ICs	.00001 Amp	4.5 V	.5 mm	85 Cel	5 V	DIFFERENTIAL	0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N56	3	1 mm	8 mm	Not Qualified		COMPLEMENTARY	4		YES	e4	30	260	8 mm		.28 ns
NBSG16MMNR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1			.155 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQCC-N16		1 mm	3 mm	Not Qualified			1		YES	e0		235	3 mm		.155 ns
NBSG16MMN	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1			.155 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	QUAD	S-PQCC-N16		1 mm	3 mm	Not Qualified			1		YES	e0	30	235	3 mm		.155 ns
TSB41BA3DIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	80	HQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2				IEEE 1394B	150 mA	DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.75 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	2		YES	e4	30	260	12 mm	.172 V	0 ns
TSB41BA3DPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	80	HQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2				IEEE 1394B	150 mA	DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.7 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	2		YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3IPFPEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6		CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	85 Cel	3.3 V		-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	30	260	12 mm	.172 V	0 ns
SN75HVD3082EDGK	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	1300 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	.65 mm	70 Cel	5 V	DIFFERENTIAL	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	3 mm	1.5 V	200 ns
STUSB06EHTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			300 ns			DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	1.8,3.3		CHIP CARRIER	LCC16,.12SQ,30/20	1.6 V	Line Driver or Receivers	.000005 Amp	3 V	.5 mm	85 Cel	1.8 V		-40 Cel	1		QUAD	S-XQCC-N16		.8 mm	3 mm	Not Qualified	.02 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED	3 mm		300 ns
AD8328ACPZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
SN65HVD3085EDGK	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	500 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	.65 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	3 mm	1.5 V	200 ns
MAX3453EETE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		BICMOS	18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.5 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm	3 mm	Not Qualified	2 Amp		1		YES	e0		245	3 mm		22 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.