INDUSTRIAL Line Drivers & Receivers 1,832

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM2567EBRNZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				25 ns	EIA-485; TIA-485; TIA-422; EIA-422	51 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH	SSOP28,.4				3 V	.65 mm	105 Cel		3-STATE	-40 Cel	1		DUAL	R-PDSO-G28		2.65 mm		7.5 mm			COMPLEMENTARY	1	LOGIC VIO SUPPLY OF 1.7 V TO 5.5 V	YES		NOT SPECIFIED	NOT SPECIFIED	10.3 mm		50 ns
ADM2567EBRNZ-RL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				25 ns	EIA-485; TIA-485; TIA-422; EIA-422	51 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH	SSOP28,.4				3 V	.65 mm	105 Cel		3-STATE	-40 Cel	1		DUAL	R-PDSO-G28		2.65 mm		7.5 mm			COMPLEMENTARY	1	LOGIC VIO SUPPLY OF 1.7 V TO 5.5 V	YES		NOT SPECIFIED	NOT SPECIFIED	10.3 mm		50 ns
ADM2861EBRNZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				400 ns	RS-485; RS-422	53 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH	SSOP28,.4				3 V	.65 mm	105 Cel			-40 Cel	1		DUAL	R-PDSO-G28		2.65 mm		7.5 mm		2 Amp	COMPLEMENTARY	1		YES		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	1.5 V	200 ns
ADM2863EBRNZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				400 ns	RS-485; RS-422	53 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH	SSOP28,.4				3 V	.65 mm	105 Cel			-40 Cel	1		DUAL	R-PDSO-G28		2.65 mm		7.5 mm		2 Amp	COMPLEMENTARY	1		YES		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	1.5 V	200 ns
ADM2865EBRNZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				25 ns	RS-485; RS-422	53 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH	SSOP28,.4				3 V	.65 mm	105 Cel			-40 Cel	1		DUAL	R-PDSO-G28		2.65 mm		7.5 mm		2 Amp	COMPLEMENTARY	1		YES		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	1.5 V	50 ns
MAX248EQH-D	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES				CMOS				30 mA		5 V		5		CHIP CARRIER	LDCC44,.7SQ		Line Driver or Receivers	.00005 Amp		1.27 mm	85 Cel			-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	1				Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
PTN36221AHXHP	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	PLASTIC/EPOXY	YES		1												CHIP CARRIER, VERY THIN PROFILE						.4 mm							QUAD	S-PQCC-N12	1	.4 mm		1.6 mm									260	1.6 mm
PTN36221AHXZ	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1				.5 ns	GENERAL PURPOSE		DIFFERENTIAL	1.8 V				CHIP CARRIER, VERY THIN PROFILE	LCC12,.06SQ,16			.000045 Amp	1.71 V	.4 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		QUAD	S-PQCC-N12	1	.4 mm		1.6 mm			COMPLEMENTARY	1		YES			260	1.6 mm	.8 V	.5 ns
XR32220EUER-L/TR	Exar	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	2					EIA-232-F; TIA-232-F; V.24; V.28; EIA-562; TIA-562		SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	S-XQCC-N24		1 mm		4 mm				2		NO		NOT SPECIFIED	NOT SPECIFIED	4 mm
P82B96TD/S410,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE	4 mA	STANDARD	5 V		2/15		SMALL OUTLINE	SOP8,.25		Other Interface ICs		2 V	1.27 mm	85 Cel			-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified			2		NO	e4			4.9 mm
TDA8579T/N1SJ	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2					GENERAL PURPOSE		DIFFERENTIAL	8.5 V				SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm				1			e4	30	260	4.9 mm
TDA8579T/N1SU	NXP Semiconductors	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	2					GENERAL PURPOSE		DIFFERENTIAL	8.5 V				SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm				1			e4	30	260	4.9 mm
DS90UH940TNKDRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			3 V	.5 mm	105 Cel	1.8 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
DS90UH940TNKDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			3 V	.5 mm	105 Cel	1.8 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
DS80PCI810NJYT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	3.6 V	1	8						DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			3 V	.5 mm	85 Cel	2.5 V		-40 Cel	1	MATTE TIN	QUAD	R-XQCC-N54	2	.8 mm		5.5 mm				1		YES	e3	30	260	10 mm
DS90UB929TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers	.00001 Amp		.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	9 mm	1.22 V
DS90UB949TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS90UH929TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS90UH929TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS90UH947TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		2			AEC-Q100			469 mA			1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers			.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm
DS90UH947TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		2			AEC-Q100			469 mA			1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers			.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm
DS90UH948TNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2	ALSO HAS SUPPLY VOLTAGE FROM 1.14 TO 1.26 V	NO	e3	30	260	9 mm
DS90UH948TNKDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2	ALSO HAS SUPPLY VOLTAGE FROM 1.14 TO 1.26 V	NO	e3	30	260	9 mm
DS90UH949TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2			AEC-Q100		I2C	330 mA	DIFFERENTIAL	1.1 V	1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers		1.045 V	.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY		ALSO REQ 1.71 TO 1.89V AND 3.135 TO 3.465V	YES	e4	30	260	9 mm
DS90UH949TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2			AEC-Q100		I2C	330 mA	DIFFERENTIAL	1.1 V	1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers		1.045 V	.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY		ALSO REQ 1.71 TO 1.89V AND 3.135 TO 3.465V	YES	e4	30	260	9 mm
SN65HVD63RGTR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				5000 ns	EIA-485		STANDARD		5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.6 V	.5 mm	105 Cel			-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm		3 mm				1		NO	e4	NOT SPECIFIED	NOT SPECIFIED	3 mm		11000 ns
SN65HVD63RGTT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				5000 ns	EIA-485		STANDARD		5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.6 V	.5 mm	105 Cel			-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm		3 mm				1		NO	e4	NOT SPECIFIED	NOT SPECIFIED	3 mm		11000 ns
DS280BR810ZBFR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	135	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	2.625 V	1	8				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			GRID ARRAY, LOW PROFILE, FINE PITCH		2.375 V			2.375 V	.8 mm	85 Cel	2.5 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	R-PBGA-B135	3	1.35 mm		8 mm				1		YES	e1	30	260	13 mm
DS280BR810ZBFT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	135	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	2.625 V	1	8				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			GRID ARRAY, LOW PROFILE, FINE PITCH		2.375 V			2.375 V	.8 mm	85 Cel	2.5 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	R-PBGA-B135	3	1.35 mm		8 mm				1		YES	e1	30	260	13 mm
DS90UB924TRHSRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm				1		NO	e3	30	260	7 mm
TUSB1002IRGER	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2							DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	1	1 mm		4 mm				2		YES	e4	30	260	4 mm
TUSB1002IRGET	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2							DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	1	1 mm		4 mm				2		YES	e4	30	260	4 mm
THS6212IRHFT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	14 V	2	1				GENERAL PURPOSE		DIFFERENTIAL	6 V	14 V		-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		5 V			5 V	.5 mm	85 Cel	6 V		-40 Cel	2	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	QUAD	R-PQCC-N24	2	1 mm	.665 A	4 mm						NO	e4	NOT SPECIFIED	260	5 mm
DS280DF810ABVT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	135	FBGA	RECTANGULAR	PLASTIC/EPOXY	YES		8	8				GENERAL PURPOSE		DIFFERENTIAL					GRID ARRAY, FINE PITCH						.8 mm	85 Cel			-40 Cel	8	TIN SILVER COPPER	BOTTOM	R-PBGA-B135	3	2.51 mm		8.05 mm				8		YES	e1	30	260	13.05 mm
DIX4192IPFBRQ1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.95 V			FLATPACK, THIN PROFILE, FINE PITCH		1.65 V			3 V	.5 mm	85 Cel	1.8 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	2	1.2 mm		7 mm				1		YES	e4	30	260	7 mm
NB7VPQ701MMUTBG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1							DIFFERENTIAL	1.8 V				CHIP CARRIER, VERY THIN PROFILE					1.71 V	.4 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N12	1	.55 mm		1.6 mm				1		YES				1.6 mm
DS90UB934TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm		7 mm				2		NO	e4	30	260	7 mm
PAM8100RRR	Diodes Incorporated	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2							DIFFERENTIAL	3.3 V	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.5 V				.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G14		1.2 mm		4.4 mm						NO	e3		260	5 mm
SN65MLVD204BD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE	SOP8,.25	3 V		.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.895 mm			COMPLEMENTARY	1		YES	e4	30	260	4.905 mm		10 ns
DS280MB810ZBLR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	135	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	2.625 V	1	8				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			GRID ARRAY, LOW PROFILE, FINE PITCH		2.375 V			2.375 V	.8 mm	85 Cel	2.5 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	R-PBGA-B135	3	1.43 mm		8 mm				1		YES	e1	30	260	13 mm
DS280MB810ZBLT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	135	LFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	2.625 V	1	8				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			GRID ARRAY, LOW PROFILE, FINE PITCH		2.375 V			2.375 V	.8 mm	85 Cel	2.5 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	R-PBGA-B135	3	1.43 mm		8 mm				1		YES	e1	30	260	13 mm
ADM3066EARMZ-R7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				15 ns	EIA-485; TIA-485	7.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP10,.20,20				3 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm		3 mm			COMPLEMENTARY	1		YES	e3	30	260	3 mm		35 ns
ADM3066EARMZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				15 ns	EIA-485; TIA-485	7.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP10,.20,20				3 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm		3 mm			COMPLEMENTARY	1		YES	e3	30	260	3 mm		35 ns
ADM3095EARZ-RL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				500 ns	EIA-485; TIA-485		DIFFERENTIAL SCHMITT TRIGGER	3 V				SMALL OUTLINE					1.62 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm				1		YES	e3	30	260	9.9 mm		220 ns
ADM3095EARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				500 ns	EIA-485; TIA-485		DIFFERENTIAL SCHMITT TRIGGER	3 V				SMALL OUTLINE					1.62 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm				1		YES	e3	30	260	9.9 mm		220 ns
TUSB544IRNQR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.4 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	1	.8 mm		4 mm				4		YES	e4	30	260	6 mm
TUSB544IRNQT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.4 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	1	.8 mm		4 mm				4		YES	e4	30	260	6 mm
TUSB544RNQR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.4 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	1	.8 mm		4 mm				4		YES	e4	30	260	6 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.