J BEND Line Drivers & Receivers 19

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX249CQH-D	Maxim Integrated		COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		0 Cel	6	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
ADM5170AP	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel	3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
MAX244CQH	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	8	CMOS	3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp	INVERTED	10	EXTERNAL CHARGE PUMP	NO	e0	20	240	16.585 mm	10 V	1500 ns
UC5181CQTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm		120 ns
ADM5170AP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel	3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
ADM5170JP-REEL	Analog Devices	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	70 Cel	3-STATE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
MC10E116FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V	-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC10E116FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V	-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC10H116FNG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		3	ECL		GENERAL PURPOSE	23 mA	DIFFERENTIAL		-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ	Line Driver or Receivers			1.27 mm	75 Cel		0 Cel		MATTE TIN	QUAD	S-PQCC-J20	3	4.57 mm	8.965 mm	Not Qualified			3		YES	e3	30	260	8.965 mm		1.3 ns
MC10H116FNR2G	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		3	ECL		GENERAL PURPOSE	23 mA	DIFFERENTIAL		-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ	Line Driver or Receivers			1.27 mm	75 Cel		0 Cel		MATTE TIN	QUAD	S-PQCC-J20	3	4.57 mm	8.965 mm	Not Qualified			3		YES	e3	30	260	8.965 mm		1.3 ns
ADM5170APZ	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel	3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
ADM5170APZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel	3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
MC100E116FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	40 mA	DIFFERENTIAL	5 V	-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC100E416FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	186 mA	DIFFERENTIAL	5 V	-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	11.505 mm		.5 ns
MC10E416FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	162 mA	DIFFERENTIAL	5 V	-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.5 ns
MC100E416FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	186 mA	DIFFERENTIAL	5 V	-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	11.505 mm		.5 ns
MAX244CQH-D	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		0 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	3			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX248CQH-D	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		0 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX248EQH-D	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	85 Cel		-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.