Analog Devices Line Drivers & Receivers 405

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM232LJNZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		4.57 mm	7.62 mm	Not Qualified		INVERTED	2	INTERNAL CHARGE PUMP	NO	e3			19.43 mm	10 V	0 ns
ADM237LJRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	0 ns
ADM241LJRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	17.9 mm	10 V	0 ns
ADM241LJRZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	40	260	17.9 mm	10 V	0 ns
ADM242ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS	3500 ns	EIA-232-E; V.28		SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP18,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G18	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	11.55 mm	10 V	500 ns
ADM3202ARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	7.4 V	1000 ns
ADM3202ARWZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	12 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	10 V	1000 ns
ADM3222ARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	12 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e3		260	7.2 mm	10 V	1000 ns
ADM3311EACPZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e3	40	260	5 mm	10 V	1000 ns
ADM3311EACPZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	5 mm	10 V	1000 ns
ADM3311EARUZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		2.7 V	.65 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	1000 ns
ADM3311EARUZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		2.7 V	.65 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	1000 ns
ADM3485EARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	35 ns	EIA-422; EIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e3		260	4.9 mm	1.5 V	90 ns
ADM485ARMZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	4 Amp		1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e3	30	260	3 mm	1.5 V	30 ns
ADM489ARUZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	2000 ns	EIA-422; EIA-485	.074 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp		1		YES	e3	30	260	5 mm	1.5 V	2000 ns
ADM560JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	17.9 mm	10 V	2000 ns
ADM3075EWYRZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1		800 ns	EIA-422; EIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1	DATA RATES UPTO 500 KBPS	YES	e3	40	260	4.9 mm	1.5 V	200 ns
AD8138ARMZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					1.4 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADM1181AARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1500 ns	EIA-232-E; V.28	18 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e3	30	260	10.3 mm	10 V	1000 ns
ADM1385ARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	12 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e3		260	7.2 mm	10 V	1000 ns
ADM222ANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BICMOS	3500 ns	EIA-232-E; V.28		SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	2	MATTE TIN	DUAL	R-PDIP-T18		5.33 mm	7.62 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3			22.48 mm		500 ns
ADM2483BRWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		620 ns	EIA-485-A; TIA-485-A; ISO 8482E		DIFFERENTIAL SCHMITT TRIGGER	3 V	5.25 V	3/5,5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers	.00001 Amp	2.7 V	1.27 mm	85 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e3	30	260	10.3 mm	1.5 V	1050 ns
ADM3307EACPZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	4.5 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		3		NO	e3			5 mm	10 V	1000 ns
ADM3307EACPZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	4.5 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		3		NO	e3			5 mm	10 V	1000 ns
ADM3310EACPZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	5 mm	10 V	1000 ns
ADM3310EACPZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	5 mm	10 V	1000 ns
ADM3312EACPZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	5 mm	10 V	1000 ns
ADM3312EACPZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	5 mm	10 V	1000 ns
ADM3315EACPZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	5 mm	10 V	1000 ns
ADM3315EACPZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	5 mm	10 V	1000 ns
ADM3315EACPZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	5 mm	10 V	1000 ns
ADM485ANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS	15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.000001 Amp	4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8		4.57 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e3			9.27 mm	1.5 V	40 ns
ADM2483BRW-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		620 ns	EIA-485-A; TIA-485-A; ISO 8482E		DIFFERENTIAL SCHMITT TRIGGER	3 V	5.25 V	3/5,5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers	.00001 Amp	2.7 V	1.27 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1		YES	e0		240	10.3 mm	1.5 V	1050 ns
ADM4855AR-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	600 ns	EIA-422; EIA-485	.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e0		240	4.9 mm	1.5 V	1000 ns
ADM4856AR-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	180 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e0	30	240	4.9 mm	1.5 V	190 ns
ADM489ARUZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	2000 ns	EIA-422; EIA-485	.074 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp		1		YES	e3	40	260	5 mm	1.5 V	2000 ns
ADM202JNZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BICMOS	5000 ns	EIA-232-E; V.28	4 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		5.33 mm	7.62 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3			20.13 mm		5000 ns
ADM238LJNZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	CMOS		EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified			4	INTERNAL CHARGE PUMP	NO	e3			29.59 mm	10 V	0 ns
ADM207EARSZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; TIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24		2 mm	5.3 mm	Not Qualified	1.6 Amp		3		NO	e3			8.2 mm	10 V	2000 ns
ADM207EARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; TIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		3		NO	e3	30	260	8.2 mm	10 V	2000 ns
ADM213EARUZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3		260	9.7 mm	10 V	2000 ns
AD8324ACPZ	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1			GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
AD8321ARZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			GENERAL PURPOSE		DIFFERENTIAL	9 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					NO	e3		260	12.8 mm		0 ns
AD815ARBZ-24	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	24	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1	BIPOLAR		GENERAL PURPOSE	55 mA	DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, HEAT SINK/SLUG					5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G24	5	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e3		260	15.4 mm
ADM207ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	5000 ns
ADM232LANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.000025 Amp	4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		4.57 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2	INTERNAL CHARGE PUMP	NO	e3			19.43 mm	10 V	0 ns
ADM237LARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	0 ns
ADM237LARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.