National Semiconductor Line Drivers & Receivers 3

Reset All
Part RoHS Manufacturer Interface IC Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Display Mode Data Input Mode Surface Mount Maximum Supply Voltage No. of Functions No. of Channels Technology Screening Level No. of Bits Maximum Transmit Delay Interface Standard Maximum Supply Current Input Characteristics Nominal Supply Voltage Maximum Supply Voltage-1 Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code No. of Segments Minimum Supply Voltage-1 Sub-Category Maximum High Level Input Current Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Nominal Supply Voltage-1 Output Characteristics Minimum Operating Temperature Driver No. of Bits Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Nominal Output Peak Current Limit Width Qualification Maximum Output Low Current Output Polarity Receiver No. of Bits Additional Features Differential Output JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Multiplexed Display Capability Minimum Out Swing Maximum Receive Delay

DS92LV1212TMSAX

National Semiconductor

LINE RECEIVER

INDUSTRIAL

GULL WING

28

SSOP

RECTANGULAR

PLASTIC/EPOXY

YES

3.6 V

1

CMOS

GENERAL PURPOSE

60 mA

STANDARD

3.3 V

3.3

SMALL OUTLINE, SHRINK PITCH

SSOP28,.3

Line Driver or Receivers

3 V

.65 mm

85 Cel

-40 Cel

TIN LEAD

DUAL

R-PDSO-G28

1

2 mm

5.29 mm

Not Qualified

1

YES

e0

30

235

10.2 mm

0 ns

DS34C86TN/NOPB

National Semiconductor

LINE RECEIVER

INDUSTRIAL

THROUGH-HOLE

16

DIP

RECTANGULAR

PLASTIC/EPOXY

NO

4

CMOS

EIA-422; EIA-423; FED STD 1020; FED STD 1030

DIFFERENTIAL SCHMITT TRIGGER

5 V

5

IN-LINE

DIP16,.3

Line Driver or Receivers

2.54 mm

85 Cel

3-STATE

-40 Cel

MATTE TIN

DUAL

R-PDIP-T16

1

5.08 mm

7.62 mm

Not Qualified

6 Amp

INVERTED

4

e3

19.305 mm

30 ns

DS90LT012ATMFX/NOPB

National Semiconductor

LINE RECEIVER

INDUSTRIAL

GULL WING

5

LSSOP

RECTANGULAR

PLASTIC/EPOXY

YES

3.6 V

1

CMOS

EIA-644-A; TIA-644-A

9 mA

DIFFERENTIAL

3.3 V

3.3

SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

TSOP5/6,.11,37

Line Driver or Receivers

2.7 V

.95 mm

85 Cel

-40 Cel

Matte Tin (Sn)

DUAL

R-PDSO-G5

1

1.22 mm

1.6 mm

Not Qualified

2 Amp

1

e3

40

260

2.92 mm

3.5 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.