Onsemi Line Drivers & Receivers 134

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC10EP16TDTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.3 ns	GENERAL PURPOSE	31 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	1	TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.3 ns
MC10EP16VADG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel		-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.34 ns
MC10EP16VADR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel		-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.34 ns
MC10EP16VADTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel		-40 Cel	1	TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.34 ns
MC10EP16VADTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel		-40 Cel	1	TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.34 ns
MC10EP17DWG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL		.3 ns	GENERAL PURPOSE	68 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel	4	TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	12.8 mm		.3 ns
MC10EP89DG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		0 ns
MC10EP89DR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel		-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm	1.4 V	0 ns
MC10H115MELG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers			1.27 mm	75 Cel		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified			4		NO	e4		260	10.2 mm		1.3 ns
MC10H116MG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3				GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.23		Line Driver or Receivers	.000095 Amp		1.27 mm	75 Cel		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified		COMPLEMENTARY	3		YES	e4		260	10.2 mm		1.45 ns
MC10SX1189DG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	9.9 mm		.5 ns
MC10SX1189DR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel		-40 Cel	1	TIN	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			1		YES	e3		260	9.9 mm		.5 ns
MC1489APG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR			EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	75 Cel		0 Cel		Tin (Sn)	DUAL	R-PDIP-T14		4.69 mm	7.62 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e3	NOT SPECIFIED	260	18.86 mm		85 ns
MC1489DG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel		0 Cel		Tin (Sn)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e3	40	260	8.65 mm		85 ns
MC1489DR2G	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel		0 Cel		Tin (Sn)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e3	40	260	8.65 mm		85 ns
MC1489MG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	3	2.05 mm	5.275 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e4	40	260	10.2 mm		85 ns
MC3488ADG	Onsemi	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2	BIPOLAR		140000 ns	EIA-232-D; X.26; X.28; EIA-423; FED STD 1030		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel		0 Cel	2	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e3	30	260	4.9 mm	8 V	0 ns
MC3488ADR2G	Onsemi	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2	BIPOLAR		140000 ns	EIA-232-D; X.26; X.28; EIA-423; FED STD 1030		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	DIP8,.3		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel		0 Cel	2	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e3	30	260	4.9 mm	8 V	0 ns
MC75174BDWG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel	3-STATE	-40 Cel	4	Tin (Sn)	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified					YES	e3	40	260	12.8 mm	1.5 V	0 ns
MC75174BDWR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel	3-STATE	-40 Cel	4	Tin (Sn)	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified					YES	e3	40	260	12.8 mm	1.5 V	0 ns
MC75174BPG	Onsemi	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	85 Cel	3-STATE	-40 Cel	4	Tin (Sn)	DUAL	R-PDIP-T16		4.44 mm	7.62 mm	Not Qualified					YES	e3	40	260	19.175 mm	1.5 V	0 ns
NB100LVEP17MNG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	VQCCN	RECTANGULAR	UNSPECIFIED	YES	5.5 V	4	ECL		.325 ns	GENERAL PURPOSE	55 mA	DIFFERENTIAL	2.5 V		-4.5	-4.5 V	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel		-40 Cel	4	MATTE TIN	QUAD	R-XQCC-N24	1	1 mm	4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -2.375V TO -5.5V IN NECL MODE	YES	e3	30	260	4 mm		.325 ns
NBSG16VSMNR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1			.18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel		-40 Cel	1	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16	1	1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES		30	260	3 mm		.18 ns
NCV7361ADG	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1			4000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	12 V				SMALL OUTLINE					5.25 V	1.27 mm	125 Cel		-40 Cel	1	Tin (Sn)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		NO	e3	40	260	4.9 mm		6000 ns
MC100EP16VCMNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.4 ns	GENERAL PURPOSE	52 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel		-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	S-PDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES		30	260	2 mm		.4 ns
MC100EP16TMNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.3 ns	GENERAL PURPOSE	39 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel		-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	R-PDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES		30	260	2 mm		.3 ns
MC100LVEL16DTG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1	ECL			GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V		+-3.3	-3.3 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel		MATTE TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.375 ns
MC100EP17DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL		.32 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4	30	260	6.5 mm		.32 ns
MC10EP17DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL		.3 ns	GENERAL PURPOSE	62 mA	DIFFERENTIAL	3.3 V		-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4	30	260	6.5 mm		.3 ns
MC10EP17DTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL		.3 ns	GENERAL PURPOSE	62 mA	DIFFERENTIAL	3.3 V		-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4	30	260	6.5 mm		.3 ns
MC100E416FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	186 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	11.505 mm		.5 ns
MC10SX1190DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			1		YES	e4	30	260	6.5 mm		.38 ns
NCN2500MNR2	Onsemi	LINE TRANSCEIVER	OTHER	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			15 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.25 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	4 V	Line Driver or Receivers		1.5 V	.5 mm	85 Cel		-25 Cel	1	TIN LEAD	QUAD	S-XQCC-N16		1 mm	3 mm	Not Qualified			1		YES	e0		235	3 mm		15 ns
MC100EP116MNG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	21	VQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	6	ECL		.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	6	TIN	QUAD	S-XQCC-N21	1	1 mm	5 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	5 mm		.34 ns
NBA3N201SDG	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100	2.4 ns		24 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP8,.25			.00001 Amp	3 V	1.27 mm	125 Cel	DIFFERENTIAL	-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm		8 Amp	COMPLEMENTARY			YES	e3	30	260	4.9 mm	2 V	6 ns
NBA3N200SDG	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				AEC-Q100			22 mA		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	125 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1			Not Qualified	8 Amp				YES	e3	30	260			6 ns
NB7VPQ701MMUTBG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1						DIFFERENTIAL	1.8 V				CHIP CARRIER, VERY THIN PROFILE					1.71 V	.4 mm	85 Cel		-40 Cel	1		QUAD	S-XQCC-N12	1	.55 mm	1.6 mm				1		YES				1.6 mm
NB7NPQ1104MMTTWG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	42	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					334 mA	DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20			.00005 Amp	3 V	.5 mm	85 Cel		-40 Cel		MATTE TIN	QUAD	R-PQCC-N42	1	.8 mm	3.5 mm			COMPLEMENTARY			YES	e3	30	260	9 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.