Texas Instruments Line Drivers & Receivers 1,869

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Output Polarity	Receiver No. of Bits	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing
DS90UH927QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified			NO	e3	30	260	6 mm
DS90UH927QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified			NO	e3	30	260	6 mm
DS90UH927QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified			NO	e3	30	260	6 mm
LMH0002SQ/S250	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers		3.135 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	1	.8 mm	4 mm	Not Qualified			YES	e3	30	260	4 mm	.75 V
DS26LS31N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		15 ns	EIA-422; FED STD 1020		STANDARD	5 V		5	IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified			YES	e0			19.05 mm	2 V
DS90CR286AQMT/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			AEC-Q100		EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified	TRUE	4		e3	30	260	14 mm
DS90CR286AQMTX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			AEC-Q100		EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified	TRUE	4		e3	30	260	14 mm
DS99R103TSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			GENERAL PURPOSE	95 mA	STANDARD	3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	7 mm
DS99R104TSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			GENERAL PURPOSE	90 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified	TRUE	1	NO	e3	30	260	7 mm
DS90C365AMTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	60 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	12.5 mm
DS92LV1023EMQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE	90 mA	STANDARD	3.3 V		3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.3 mm	Not Qualified			YES	e3	30	260	10.2 mm
DS90CR483AVJD/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4				100 ns		210 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified	COMPLEMENTARY	8	YES	e4	30	260	14 mm	2.7 V
DS90CR483AVJDX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4				100 ns		210 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified	COMPLEMENTARY	8	YES	e4	30	260	14 mm	2.7 V
DS90CR484AVJDX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4		CMOS				280 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified	COMPLEMENTARY	8	YES	e4	30	260	14 mm	2.7 V
DS92LV3221TVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		2		CMOS		10 ns		145 mA		3.3 V	3.465 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	10 mm	2.4 V
DS92LV3221TVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		2		CMOS		10 ns		145 mA		3.3 V	3.465 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	10 mm	2.4 V
DS92LV3222TVS/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		2				10 ns		185 mA		3.3 V	3.465 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	TRUE	2	NO	e3	30	260	10 mm
DS92LV3222TVSX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		2				10 ns		185 mA		3.3 V	3.465 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	TRUE	2	NO	e3	30	260	10 mm
DS92LV3241TVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4				10 ns		200 mA		3.3 V	3.465 V	1.8/3.3,3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	10 mm	2.4 V
DS92LV3241TVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4				10 ns		200 mA		3.3 V	3.465 V	1.8/3.3,3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	10 mm	2.4 V
DS92LV3242TVS/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4						265 mA		3.3 V	3.465 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	TRUE	4	YES	e3	30	260	10 mm
DS92LV3242TVSX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4						265 mA		3.3 V	3.465 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	TRUE	4	YES	e3	30	260	10 mm
LMH0001SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	43 mA	DIFFERENTIAL	3.3 V	3.465 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified	COMPLEMENTARY		YES	e3	30	260	4 mm	.75 V
DS100BR210SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		2	2					63 mA			2.625 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	2.5 V		-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified			YES	e3	30	260	4 mm
DS100KR800SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES		4	8								2.625 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20	2.375 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	R-PQCC-N54	2	.8 mm	5.5 mm	Not Qualified	COMPLEMENTARY	4	YES	e3	30	260	10 mm
DS100KR800SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES		4	8								2.625 V	2.5,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20	2.375 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	R-PQCC-N54	2	.8 mm	5.5 mm	Not Qualified	COMPLEMENTARY	4	YES	e3	30	260	10 mm
DS64BR111SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES			2					63 mA			2.625 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified	COMPLEMENTARY			e3	30	260	4 mm
DS64BR111SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES			2					63 mA			2.625 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified	COMPLEMENTARY			e3	30	260	4 mm
DS90UR916QSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			110 mA			1.89 V	1.8,1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N60	3	.8 mm	9 mm	Not Qualified	COMPLEMENTARY	1	YES	e3	30	260	9 mm
AM26LS31MW/883	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES		4		BIPOLAR	38535Q/M;38534H;883B	30 ns		60 mA		5 V	5.5 V	5	FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.00002 Amp		1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-CDFP-F16	1	2.032 mm	6.35 mm	Not Qualified	TRUE		YES	e0			9.906 mm	2 V
DS100KR401SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES		4	8								2.625 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20	2.375 V	Line Driver or Receivers	.00015 Amp		.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	R-PQCC-N54	2	.8 mm	5.5 mm	Not Qualified	COMPLEMENTARY	4	YES	e3	30	260	10 mm
DS100KR401SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES		4	8								2.625 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20	2.375 V	Line Driver or Receivers	.00015 Amp		.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	R-PQCC-N54	2	.8 mm	5.5 mm	Not Qualified	COMPLEMENTARY	4	YES	e3	30	260	10 mm
DS100RT410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V		.00004 Amp	2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm			4	YES	e3	30	260	7 mm
DS30BA101SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1						59 mA		3.3 V	3.465 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.635 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	.8 mm	4 mm	Not Qualified	COMPLEMENTARY	1	YES	e3	30	260	4 mm
DS90UB913QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			80 mA			1.89 V	1.8,1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified	COMPLEMENTARY	1	YES	e3	30	260	5 mm
DS90UB914QSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			114 mA			1.89 V	1.8,1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified	TRUE	1	YES	e3	30	260	7 mm
DS90UB927QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA			3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm		COMPLEMENTARY		YES	e3	30	260	6 mm
DS90UR124QVS/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1		CMOS	AEC-Q100			95 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY	1	YES	e3	30	260	10 mm
DS90UR124QVSX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1		CMOS	AEC-Q100			95 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	COMPLEMENTARY	1	YES	e3	30	260	10 mm
DS90UR241IVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1		CMOS	AEC-Q100			90 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified	COMPLEMENTARY	1	YES	e3	30	260	7 mm	2 V
DS90UR241IVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1		CMOS	AEC-Q100			90 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified	COMPLEMENTARY	1	YES	e3	30	260	7 mm	2 V
DS99R101VS/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1						95 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified	TRUE		YES	e3	30	260	7 mm
DS99R102VS/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1		CMOS				85 mA		3.3 V	3.6 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	0 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified	TRUE	1	NO	e3	30	260	7 mm
DS99R102VSX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES				CMOS				85 mA		3.3 V		3.3	FLATPACK	TQFP48,.35SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel		MATTE TIN	QUAD	S-PQFP-G48	3			Not Qualified				e3	30	260
LM4312SN/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES								33 mA		1.8 V		1.8	CHIP CARRIER	LCC48,.24SQ,16		Line Driver or Receivers			.4 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3			Not Qualified				e3	30	260
SCAN12100TYA/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	100	QFP	SQUARE	PLASTIC/EPOXY	YES												1.8,3.3	FLATPACK	TQFP100,.63SQ		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQFP-G100	3			Not Qualified				e3	30	260
SCAN921025HSMX/NOPB	Texas Instruments	LINE DRIVER	AUTOMOTIVE	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES		1						105 mA		3.3 V	3.6 V	3.3	GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	3 V	Line Driver or Receivers			.8 mm	125 Cel	3.3 V	3-STATE	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B49	4	1.5 mm	7 mm	Not Qualified	COMPLEMENTARY		YES	e1	30	260	7 mm	2.2 V
SCAN921226HSMX/NOPB	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	BALL	49	FBGA	SQUARE	PLASTIC/EPOXY	YES								120 mA		3.3 V		3.3	GRID ARRAY, FINE PITCH	BGA49,7X7,32		Line Driver or Receivers			.8 mm	125 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B49	4			Not Qualified				e1	30	260

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.