Texas Instruments Line Drivers & Receivers 1,869

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65LBC171DWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		BICMOS		12 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482; X3.277	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	3		YES	e4	30	260	12.825 mm	1 V	16 ns
SN65LVDT33PWG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	5 mm		6 ns
SN65LVDT34DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS			EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		4.4 mm	Not Qualified	4 Amp	TRUE	2		NO	e4	30	260	4.9 mm		6 ns
SN75LVDS388ADBTRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G38		1.2 mm		4.4 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	9.7 mm		4 ns
THS6062IDRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	2					GENERAL PURPOSE		DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE					2.5 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
SN65HVD08DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	70 ns
SN65LVDS93DGGG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		13.38 ns	EIA-644; TIA-644	120 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm		6.1 mm	Not Qualified	.02 Amp	COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
SN65MLVD047ADG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.4 ns	EIA-899; TIA-899	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.48 V	0 ns
SN65MLVD047APWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.4 ns	EIA-899; TIA-899	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.48 V	0 ns
SN65LVDS048ADG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	2 Amp		4		NO	e4	30	260	9.9 mm		3.7 ns
SN65LVDS048APWG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	2 Amp		4		NO	e4	30	260	5 mm		3.7 ns
SN75LVDS391PWRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	5 mm	.247 V	0 ns
SN65HVD06DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1	SIGNALING RATE UPTO 10 MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	2.5 V	70 ns
SN65HVD07DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		400 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE UPTO 1 MBPS	YES	e4	30	260	4.9 mm	2.5 V	70 ns
SN75HVD07DRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		400 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE UPTO 1 MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	2.5 V	70 ns
SN65HVD3088EDGKG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		20 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	.65 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD SILVER	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	30	260	3 mm	1.5 V	100 ns
SN65MLVD3DRBR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm		3 mm	Not Qualified	8 Amp	TRUE	1		NO	e4	30	260	3 mm	.48 V	6 ns
SN65MLVD3DRBT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm		3 mm	Not Qualified	8 Amp	TRUE	1		NO	e4	30	260	3 mm	.48 V	6 ns
DS90UB936TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N48	3	1 mm		7 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155	NO	e4	30	260	7 mm
OPA521IRGWT	Texas Instruments	LINE DRIVER	AUTOMOTIVE	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	24 V	1	1				GENERAL PURPOSE		DIFFERENTIAL	15 V	24 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		7 V			7 V	.65 mm	125 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	1	1 mm	2.5 A	5 mm						NO	e4	30	260	5 mm
THS6301IRSAT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	12.6 V	1	1				GENERAL PURPOSE		DIFFERENTIAL	12 V	12.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		11.4 V			11.4 V	.65 mm	85 Cel	12 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	1	1 mm	.085 A	4 mm						YES	e4	30	260	4 mm
THS6212YS	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	17	DIE	RECTANGULAR	UNSPECIFIED	YES	28 V	2	1						STANDARD	12 V	14 V			UNCASED CHIP		5 V			10 V		85 Cel	6 V		-40 Cel	2		UPPER	R-XUUC-N17				1.877 mm						NO				2.053 mm
DS90UB935TRHBTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100						1.89 V			CHIP CARRIER, VERY THIN PROFILE		1.71 V				.5 mm	105 Cel	1.8 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N32	3	1 mm		5 mm						YES	e4	30	260	5 mm
ISO1412BDWR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				570 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE		3 V			1.71 V	1.27 mm	125 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm				1		YES	e4	30	260	10.3 mm		135 ns
DS250DF230ZLST	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	36	LFBGA	SQUARE	PLASTIC/EPOXY	YES		2	2				GENERAL PURPOSE		DIFFERENTIAL					GRID ARRAY, LOW PROFILE, FINE PITCH						.8 mm	85 Cel			-40 Cel	2	Tin/Silver/Copper (Sn/Ag/Cu)	BOTTOM	S-PBGA-B36	3	1.41 mm		5 mm				2		YES	e1	30	260	5 mm
DS90UB962WRTDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm		9 mm				4	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155V	NO	e4	30	260	9 mm
DS90UH940NTNKDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
INA1651IPW	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1	1				GENERAL PURPOSE		DIFFERENTIAL		18 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.25 V			4.5 V	.65 mm	125 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm		4.4 mm				1		NO	e4	30	260	5 mm
THVD1451D	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				20 ns	EIA-485-A; TIA-485-A	2.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			SMALL OUTLINE		3 V			3 V	1.27 mm	125 Cel			-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.895 mm				1		YES	e4	30	260	4.905 mm		40 ns
DSLVDS1047PWT	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm						YES	e3	30	260	5 mm
DS90UB953ATRHBTQ1	Texas Instruments	LINE DRIVER	AUTOMOTIVE	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	125 Cel	1.8 V		-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N32	3	1 mm		5 mm						YES	e4	30	260	5 mm
DS90UB940NTNKDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	1.26 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.2 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.14 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 3 TO 3.6 V	NO	e3	30	260	9 mm
DS90UH941ASRTDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	4			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.1 V	1.155 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.045 V			1.045 V	.5 mm	105 Cel	1.1 V		-40 Cel	4	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm		9 mm					ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.71 TO 1.89 V	YES	e4	30	260	9 mm
DS90UH940TNKDRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			3 V	.5 mm	105 Cel	1.8 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
DS90UH940TNKDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			3 V	.5 mm	105 Cel	1.8 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
DS80PCI810NJYT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	3.6 V	1	8						DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			3 V	.5 mm	85 Cel	2.5 V		-40 Cel	1	MATTE TIN	QUAD	R-XQCC-N54	2	.8 mm		5.5 mm				1		YES	e3	30	260	10 mm
DS90UB929TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers	.00001 Amp		.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	9 mm	1.22 V
DS90UB949TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS90UH929TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS90UH929TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS90UH947TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		2			AEC-Q100			469 mA			1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers			.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm
DS90UH947TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		2			AEC-Q100			469 mA			1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers			.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm
DS90UH948TNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2	ALSO HAS SUPPLY VOLTAGE FROM 1.14 TO 1.26 V	NO	e3	30	260	9 mm
DS90UH948TNKDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2	ALSO HAS SUPPLY VOLTAGE FROM 1.14 TO 1.26 V	NO	e3	30	260	9 mm
DS90UH949TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2			AEC-Q100		I2C	330 mA	DIFFERENTIAL	1.1 V	1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers		1.045 V	.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY		ALSO REQ 1.71 TO 1.89V AND 3.135 TO 3.465V	YES	e4	30	260	9 mm
DS90UH949TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2			AEC-Q100		I2C	330 mA	DIFFERENTIAL	1.1 V	1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers		1.045 V	.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY		ALSO REQ 1.71 TO 1.89V AND 3.135 TO 3.465V	YES	e4	30	260	9 mm
SN65LVDS93AIDGGQ1	Texas Instruments	LINE DRIVER												AEC-Q100																					NICKEL PALLADIUM GOLD			2										e4	30	260
SN65HVD63RGTR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				5000 ns	EIA-485		STANDARD		5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.6 V	.5 mm	105 Cel			-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm		3 mm				1		NO	e4	NOT SPECIFIED	NOT SPECIFIED	3 mm		11000 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.