Line Drivers & Receivers

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75115DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		75 ns	GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	15 Amp	INVERTED	2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT		e4	NOT SPECIFIED	260	9.9 mm		75 ns
SN75150DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2	BIPOLAR		.2 ns	EIA-232-E; V.28		STANDARD	12 V	13.2 V	+-12	-12 V	SMALL OUTLINE	SOP8,.25	10.8 V	Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	NOT SPECIFIED	260	4.9 mm	10 V	0 ns
SNJ55189AW	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-PRF-38535		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		FLATPACK	FL14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Not Qualified	8.3 Amp	INVERTED	4	RESPONSE CONTROL	NO	e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm		85 ns
SNJ55ALS161J	Texas Instruments	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR		16 ns	IEEE-488	90 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	125 Cel			-55 Cel	8		DUAL	R-GDIP-T20		5.08 mm	7.62 mm	Not Qualified		TRUE	8		NO		NOT SPECIFIED	NOT SPECIFIED	24.195 mm		18 ns
SNJ55173J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR	MIL-PRF-38535		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel		TIN LEAD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.016 Amp	TRUE	4		NO	e0			19.56 mm		35 ns
SN75ALS174ADWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		22 ns	EIA-422-B; TIA-442-B; EIA-485	55 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	60 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SNJ55183FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00012 Amp	4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	1.3 V	0 ns
SNJ55ALS192W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	1	BIPOLAR		14 ns	V.11; EIA-422-B		STANDARD	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		COMPLEMENTARY			YES				10.2 mm		0 ns
SN75ALS199DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	2		NO	e4	30	260	9.9 mm		22 ns
SN65LBC179P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel	5 V	TOTEM-POLE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8	1	5.08 mm	7.62 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	9.81 mm	1.1 V	30 ns
SN75LBC179P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	30 ns
SN75LBC179DR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	30 ns
ISO1176DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			40 ns	EIA-485; TIA-485	18 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.25 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		1		YES	e4	30	260	10.3 mm		55 ns
SN65C3221IPWRG4Q1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	1	CAN ALSO OPERATE WITH A 5V SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm	10 V	0 ns
SN65HVD1785DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			2000 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	200 ns
SN65HVD1786DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			200 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	200 ns
SN65HVD1791DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			2000 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	200 ns
SN65HVD1791DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			2000 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	200 ns
SN65LBC180IDRG4Q1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	AEC-Q100		EIA-485; ISO 8482E	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	30	260	8.65 mm	1.1 V	33 ns
SN75124N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				72 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16					16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SNJ55154FK	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES			BIPOLAR	38535Q/M;38534H;883B			40 mA				5/12		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers			1.27 mm	125 Cel			-55 Cel			QUAD	S-XQCC-N20				Not Qualified	16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SNJ55ALS126J	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL	38535Q/M;38534H;883B	34 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel			-55 Cel	4		DUAL	R-XDIP-T16				Not Qualified					NO					2.96 V
DS7831WB	Texas Instruments		MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC	YES			BIPOLAR	38535Q/M;38534H;883B	25 ns				5 V		5		FLATPACK	FL16,.3		Line Driver or Receivers	.00004 Amp		1.27 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDFP-F16				Not Qualified					YES					2 V
SN65LVDS051DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR		2.7 ns	EIA-644; TIA-644	20 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	.02 Amp		2		YES	e4	30	260	9.9 mm	.247 V	4.5 ns
MAX214CPI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28(UNSPEC)		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	3.2 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; PROGRAMMABLE DTE/DCE	NO	e0			36.83 mm	5 V	1500 ns
MAX214EPI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28(UNSPEC)		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	3	TIN LEAD	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	3.2 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; PROGRAMMABLE DTE/DCE	NO	e0			36.83 mm	5 V	1500 ns
MAX214CWI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SO28(UNSPEC)		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; PROGRAMMABLE DTE/DCE	NO	e0	20	240	17.9 mm	5 V	1500 ns
MAX214EWI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SO28(UNSPEC)		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; PROGRAMMABLE DTE/DCE	NO	e0			17.9 mm	5 V	1500 ns
MAX3320ACAP	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	10 V	0 ns
MAX3320AEAP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	10 V	0 ns
MAX3320BCAP	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	10 V	0 ns
MAX3320BEAP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	10 V	0 ns
MAX3320LCAP	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	10 V	0 ns
MAX3320LEAP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	10 V	0 ns
MAX3320TCAP	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	10 V	0 ns
MAX3320TEAP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	10 V	0 ns
MAX1490ACPG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		275 ns	EIA-422; EIA-485	150 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	31.75 mm	1.5 V	225 ns
MAX1490AEPG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		275 ns	EIA-422; EIA-485	150 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0	20	245	31.75 mm	1.5 V	225 ns
MAX1490BCPG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3000 ns	EIA-422; EIA-485	150 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	31.75 mm	1.5 V	3000 ns
MAX1490BEPG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3000 ns	EIA-422; EIA-485	150 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	31.75 mm	1.5 V	3000 ns
MAX1480ACPI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		275 ns	EIA-422; EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0	20	240	36.83 mm	1.5 V	225 ns
MAX1480AEPI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		275 ns	EIA-422; EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0	20	240	36.83 mm	1.5 V	225 ns
MAX1480BCPI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3000 ns	EIA-422; EIA-485	45 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0			36.83 mm	1.5 V	3000 ns
MAX1480BEPI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3000 ns	EIA-422; EIA-485	45 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0			36.83 mm	1.5 V	3000 ns
MAX1480CCPI	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3000 ns	EIA-422; EIA-485	75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	2 Amp		1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	36.83 mm	1.5 V	3000 ns
MAX1480CEPI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3000 ns	EIA-422; EIA-485	75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	2 Amp		1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	36.83 mm	1.5 V	3000 ns
MAX3221ECAE	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		1		NO	e0		245	6.2 mm	10 V	0 ns
MAX3221EEAE	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		1		NO	e0	20	240	6.2 mm	10 V	0 ns

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.