Line Drivers & Receivers

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ISO3088DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				45 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm	Not Qualified	8 Amp		1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO3088DWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				45 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm	Not Qualified	8 Amp		1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO3088DW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				45 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm	Not Qualified	8 Amp		1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISO35DWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
ISO35DW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
SN65HVS882PWPG4	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1				10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	12 V	3 V	10/34		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	10 V	Line Driver or Receivers		10 V	.65 mm	125 Cel	12 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9.7 mm		0 ns
SN65HVS882PWPRG4	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1				10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	12 V	34 V	10/34		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	10 V	Line Driver or Receivers		10 V	.65 mm	125 Cel	12 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified		TRUE			NO	e4	NOT SPECIFIED	260	9.7 mm	4 V	0 ns
TSB41BA3APFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		6		CMOS			IEEE 1394		DIFFERENTIAL	3.3 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm		12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
TSB81BA3DPFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6		CMOS			IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm		12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
DS275SN	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			EIA-232-E		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified			1		NO				4.9 mm		0 ns
ADM3232EARWZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	10 V	1000 ns
ADM3232EARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp		2		NO	e3	30	260	10.3 mm	10 V	1000 ns
ADN4667ARZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm		6 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
ADN4668ARZ-REEL7	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	2 Amp		4		NO	e3	30	260	9.9 mm		2.7 ns
SN65LVDS051PWRG4Q1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BIPOLAR	AEC-Q100	2.7 ns	EIA-644; TIA-644	20 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	2		YES	e4	30	260	5 mm	.247 V	4.5 ns
AM26LV32EIDRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	5 Amp	TRUE	4		NO	e4	30	260	9.9 mm		26 ns
SN65HVD1786P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				200 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	200 ns
SN65HVD1787P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				50 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4			9.81 mm	1.5 V	70 ns
SN65HVD1791DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				2000 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm	1.5 V	200 ns
ADA4939-1YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm		3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
ADA4939-1YCPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm		3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
ADA4939-2YCPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm		4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADS58C28IRGC25	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2		CMOS			GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V			1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified			2			e4	30	260	9 mm		0 ns
ADS58C28IRGCR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2		CMOS			GENERAL PURPOSE	163 mA	DIFFERENTIAL	1.8 V	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified			2			e4	30	260	9 mm		0 ns
ADS58C28IRGCT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2		CMOS			GENERAL PURPOSE	163 mA	DIFFERENTIAL	1.8 V	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		TRUE	2			e4	30	260	9 mm		0 ns
DIX9211PT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	38 mA	SCHMITT TRIGGER	3.3 V	3.6 V			FLATPACK, LOW PROFILE, FINE PITCH		2.9 V			2.9 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	1	1.6 mm		7 mm	Not Qualified			1		NO	e4	30	260	7 mm		0 ns
ADA4960-1ACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm		3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADA4960-1ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm		3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADV7612BSWZ-P	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	100	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1		CMOS			I2C		STANDARD	1.8 V	3.46 V			FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH		3.14 V			1.71 V	.5 mm	85 Cel	3.3 V		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G100	3	1.6 mm		14 mm	Not Qualified			1		NO	e3	30	260	14 mm		300 ns
MRF89XA-I/MQ	Microchip Technology	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1							SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					2.1 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N32		.8 mm		5 mm	Not Qualified			1		NO	e3			5 mm
TSB81BA3EIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		3		CMOS				150 mA			3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm		12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3EPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		3		CMOS				150 mA			3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm		12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
TSB81BA3EZAJ	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	168	FBGA	SQUARE	PLASTIC/EPOXY	YES		3		CMOS				150 mA			3.6 V	1.8,3.3		GRID ARRAY, FINE PITCH	BGA168,13X13,20	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	TIN SILVER COPPER	BOTTOM	S-PBGA-B168	3	1.2 mm		7 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e1	30	260	7 mm	.172 V	0 ns
TLE7259-2GE	Infineon Technologies	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	27 V	1		BCDMOS			GENERAL PURPOSE		SCHMITT TRIGGER	13.5 V				SMALL OUTLINE					7 V	1.27 mm	125 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	R-PDSO-G8	3	1.75 mm		4 mm	Not Qualified			1		NO			260	5 mm		6000 ns
THS6043IPWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		5 V			5 V	.65 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.35 A	4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
THS6052IDDA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V		-40 Cel	2	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.68 mm	.175 A	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e3	NOT SPECIFIED	260	4.89 mm		0 ns
MC100EP16VTDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL		.35 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.35 ns
MC100EL16DTR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL			GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC100EL16DT	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL			GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC100EP16VADT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL		.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.34 ns
MC100EP16VBD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL		.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.4 ns
MC100EP16VCDTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		ECL		.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.4 ns
MC100EP16VCDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		ECL		.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0	30	235	3 mm		.4 ns
MC100EP16VCD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL		.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.4 ns
MC10EL16DTR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL			GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC10EL16DT	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1		ECL			GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
MC10EP16TDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		ECL		.3 ns	GENERAL PURPOSE	31 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.3 ns
MC10EP16VADTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		ECL		.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.1 mm		3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.34 ns

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.