OTHER Peripheral Drivers 52

Reset All
Part RoHS Manufacturer Interface IC Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Display Mode Data Input Mode Surface Mount Maximum Supply Voltage Maximum Output Current No. of Functions No. of Channels Technology Screening Level No. of Bits Built-in Protections Maximum Supply Current No. of Digits/Characters Input Characteristics Nominal Supply Voltage Maximum Supply Voltage-1 Turn-on Time Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code No. of Segments Minimum Supply Voltage-1 Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Nominal Supply Voltage-1 Output Characteristics Minimum Operating Temperature Driver No. of Bits Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Nominal Output Peak Current Limit Width Turn-off Time Qualification Output Polarity High Side Driver Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Output Current Flow Direction Length Multiplexed Display Capability

A6833SEPTR-T

Allegro MicroSystems

SIPO BASED PERIPHERAL DRIVER

OTHER

J BEND

44

QCCJ

SQUARE

PLASTIC/EPOXY

YES

5.5 V

.1 A

1

BIMOS

3.3 V

3.3/5

CHIP CARRIER

LDCC44,.7SQ

Peripheral Drivers

3 V

1.27 mm

85 Cel

-20 Cel

MATTE TIN

QUAD

S-PQCC-J44

3

4.57 mm

.125 A

16.59 mm

Not Qualified

e3

40

260

SINK

16.59 mm

TPS2090DG4

Texas Instruments

BUFFER OR INVERTER BASED PERIPHERAL DRIVER

OTHER

GULL WING

8

SOP

RECTANGULAR

PLASTIC/EPOXY

YES

5.5 V

.25 A

2

MOS

OVER CURRENT; THERMAL; UNDER VOLTAGE

.11 mA

3.3 V

20000 us

3/5

SMALL OUTLINE

SOP8,.25

Peripheral Drivers

2.7 V

1.27 mm

85 Cel

0 Cel

2

Nickel/Palladium/Gold (Ni/Pd/Au)

DUAL

R-PDSO-G8

1

1.75 mm

.5 A

3.9 mm

40000 us

Not Qualified

e4

NOT SPECIFIED

260

SINK

9.9 mm

UBA2071ATS/N1,118

NXP Semiconductors

HALF BRIDGE BASED PERIPHERAL DRIVER

OTHER

GULL WING

24

SSOP

RECTANGULAR

PLASTIC/EPOXY

YES

12.6 V

1

OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

12 V

SMALL OUTLINE, SHRINK PITCH

11.4 V

.65 mm

100 Cel

-25 Cel

DUAL

R-PDSO-G24

2 mm

5.3 mm

SOURCE AND SINK

8.2 mm

UBA2071TS/N1,118

NXP Semiconductors

HALF BRIDGE BASED PERIPHERAL DRIVER

OTHER

GULL WING

24

SSOP

RECTANGULAR

PLASTIC/EPOXY

YES

12.6 V

1

OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

12 V

SMALL OUTLINE, SHRINK PITCH

11.4 V

.65 mm

100 Cel

-25 Cel

DUAL

R-PDSO-G24

2 mm

5.3 mm

SOURCE AND SINK

8.2 mm

Peripheral Drivers

Peripheral drivers are electronic components that control and drive the operation of peripheral devices in electronic systems, such as motors, sensors, and actuators. They are commonly used in industrial and commercial applications that require precise and reliable control of peripheral devices.

Peripheral drivers can be classified into several types based on their specific functions and applications, including motor drivers, sensor drivers, and actuator drivers. These drivers can also include power supplies, amplifiers, and motor controllers, among other components.

Motor drivers are used to control and drive the operation of DC and stepper motors, and they typically include a microcontroller, power MOSFETs, and protection circuitry. Sensor drivers are used to interface with and drive sensors, which are electronic devices that detect and respond to physical stimuli. They typically include an analog-to-digital converter and signal conditioning circuitry. Actuator drivers are used to control and drive the operation of actuators, which are devices that produce a mechanical motion when energized. They are commonly used in industrial automation and control applications.

Peripheral drivers are typically characterized by their voltage and current ratings, as well as their efficiency and reliability. They play a critical role in ensuring the precise and reliable control of peripheral devices in electronic systems.