BUS EXCHANGER Bus Driver & Transceivers 53

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Screening Level	No. of Inputs	No. of Bits	Translation	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	No. of Ports	Control Type	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	No. of Outputs	Peak Reflow Temperature (C)	Length	Family
74CBTLV16212DLRG4	Texas Instruments	BUS EXCHANGER	INDUSTRIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS			12	N/A	TR	2.5	2.5/3.3		SMALL OUTLINE, SHRINK PITCH	SSOP56,.4	.25 ns	Other Logic ICs	.635 mm	85 Cel	BIDIRECTIONAL	3-STATE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	4		R-PDSO-G56	1	3.6 V	2.79 mm	7.49 mm	Not Qualified	TRUE	2.3 V	.01 mA		e4	NOT SPECIFIED		260	18.415 mm	CBTLV/3B
74CB3T3383DBQRG4	Texas Instruments	BUS EXCHANGER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5	CMOS			2			2.5	2.5/3.3		SMALL OUTLINE, SHRINK PITCH	SSOP24,.24	.25 ns	Other Logic ICs	.635 mm	85 Cel		3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	4		R-PDSO-G24	2	3.6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2.3 V			e4	30		260	8.65 mm	CB3T/3VT
74CBTLV3257BQ-Q10X	Nexperia	BUS EXCHANGER	AUTOMOTIVE	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	AEC-Q100	1	4		TR, 7 INCH	2.5		50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.09X.14,20	.25 ns		.5 mm	125 Cel	BIDIRECTIONAL	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	3	ENABLE LOW	R-PQCC-N16	1	3.6 V	1 mm	2.5 mm		TRUE	2.3 V	.05 mA		e4	30	2	260	3.5 mm	CBTLV/3B
74CBTLV3257DS-Q10J	Nexperia	BUS EXCHANGER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	AEC-Q100	1	4			2.5		50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25	.25 ns		.635 mm	125 Cel	BIDIRECTIONAL	3-STATE	-40 Cel		DUAL	3	ENABLE LOW	R-PDSO-G16		3.6 V	1.73 mm	3.9 mm		TRUE	2.3 V	.05 mA			NOT SPECIFIED	2	NOT SPECIFIED	4.9 mm	CBTLV/3B
PI3CH480ZHDEX	Diodes Incorporated	BUS EXCHANGER		NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	4	CMOS			2		TR	1.8			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	.3 ns		.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	-40 Cel		QUAD	2	ENABLE LOW	S-XQCC-N16		1.98 V	.65 mm	3 mm		TRUE	1.62 V		ALSO OPERATES AT 3.3V and 2.5V SUPPLY		NOT SPECIFIED		NOT SPECIFIED	3 mm	CB3Q/3VH/3C/2B

Bus Driver & Transceivers

A bus driver is an electronic component that manages communication between different components or devices in a computer system. It serves as an intermediary between the CPU and other components, such as memory, input/output devices, and expansion cards. The bus driver receives signals from the CPU and routes them to the appropriate component based on the address and control signals provided.

The bus driver also manages the timing of data transfer between components and ensures that the data is transferred at the correct speed and in the correct format. It may also perform error checking and correction to ensure that the data is transferred accurately.

Transceivers, on the other hand, are electronic devices that transmit and receive data signals over a communication channel. They are commonly used in telecommunications, networking, and computer systems. Transceivers can be either analog or digital and may transmit data using various modulation schemes, such as amplitude modulation (AM), frequency modulation (FM), or phase modulation (PM).

In computer systems, transceivers are commonly used to transmit and receive data over network cables, such as Ethernet cables or fiber optic cables. They may also be used to transmit and receive data over wireless networks, such as Wi-Fi or Bluetooth.

Transceivers typically include a transmitter, a receiver, and a signal processing unit that modulates and demodulates the data signals. They may also include error correction and signal amplification circuitry to improve the quality of the transmitted data.