64 Bus Driver & Transceivers 19

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	No. of Bits	Translation	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	No. of Ports	Control Type	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74ABT18504PMR	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	BICMOS	20	N/A	TR	5	5	50 pF	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	6.8 ns	64 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel		QUAD	2	INDEPENDENT CONTROL	S-PQFP-G64		5.5 V	1.6 mm	10 mm	Not Qualified	TRUE	4.5 V	40 mA	WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE		NOT SPECIFIED	NOT SPECIFIED	10 mm	ABT
SN74LVTH18646APM	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	BICMOS	9	N/A	TRAY	3.3	3.3	50 pF	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	7.1 ns	32 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	2	COMMON CONTROL	S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V	24 mA	DIRECTION CONTROL	e4	30	260	10 mm	LVT
SN74LVTH182652APM	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	BICMOS	9	N/A	TRAY	3.3	3.3	50 pF	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	8.2 ns	32 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE WITH SERIES RESISTOR	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	2	INDEPENDENT CONTROL	S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V	24 mA	SCANNABLE	e4	30	260	10 mm	LVT
SN74LVTH18652APM	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	BICMOS	9	N/A	TRAY	3.3	3.3	50 pF	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	7.1 ns	32 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	2	INDEPENDENT CONTROL	S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V	24 mA	WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION	e4	30	260	10 mm	LVT
SN74LVT182502PM	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	BICMOS	9	N/A		3.3	3.3	50 pF	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	9.7 ns	32 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE WITH SERIES RESISTOR	POSITIVE EDGE	-40 Cel		QUAD	2	INDEPENDENT CONTROL	S-PQFP-G64		3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V	20 mA	SCANNABLE		NOT SPECIFIED	NOT SPECIFIED	10 mm	LVT
SN74LVT18502PM	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	BICMOS	9	N/A		3.3	3.3	50 pF	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	7.4 ns	32 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		QUAD	2	INDEPENDENT CONTROL	S-PQFP-G64		3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V	15 mA	WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION		NOT SPECIFIED	NOT SPECIFIED	10 mm	LVT
SN74ALVCH16901DGGR	Texas Instruments	REGISTERED BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	CMOS	9	N/A	TR	1.8	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	6.4 ns	24 Amp	Bus Driver/Transceiver	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2	INDEPENDENT CONTROL	R-PDSO-G64	1	3.6 V	1.2 mm	6.1 mm	Not Qualified	TRUE	1.65 V	.04 mA	WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION	e4	30	260	17 mm	ALVC/VCX/A
CBTV4010EE,557	NXP Semiconductors	BUS EXCHANGER	OTHER	BALL	64	TFBGA	SQUARE	PLASTIC/EPOXY	YES	1		10			2.5	2.5		GRID ARRAY, THIN PROFILE, FINE PITCH	BGA64,11X11,20	.14 ns		Bus Driver/Transceivers	.5 mm	85 Cel		3-STATE		0 Cel	TIN LEAD	BOTTOM	2		S-PBGA-B64	3	2.7 V	1.2 mm	7 mm	Not Qualified	TRUE	2.3 V			e0			7 mm	4000/14000/40000
SN74ABTH18504APMR	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	BICMOS	20	N/A	TR	5	5	50 pF	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	5.5 ns	64 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel		QUAD	2	INDEPENDENT CONTROL	S-PQFP-G64		5.5 V	1.6 mm	10 mm	Not Qualified	TRUE	4.5 V	27 mA	WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE		NOT SPECIFIED	NOT SPECIFIED	10 mm	ABT
8V18502AIPMREP	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	CMOS	9			3.3			FLATPACK, LOW PROFILE, FINE PITCH		6.8 ns			.5 mm	85 Cel		3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	2		S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V			e4	20	220	10 mm	LVT
8V182512IDGGREP	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	BICMOS	18	N/A	TR	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		7.7 ns	32 Amp		.5 mm	85 Cel	BIDIRECTIONAL	3-STATE WITH SERIES RESISTOR	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2	INDEPENDENT CONTROL	R-PDSO-G64	1	3.6 V	1.2 mm	6.1 mm	Not Qualified	TRUE	2.7 V	24 mA		e4	30	260	17 mm	LVT
SN74LVTH18502APMG4	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	BICMOS	9	N/A		3.3	3.3	50 pF	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	6.8 ns	64 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	2	INDEPENDENT CONTROL	S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V	24 mA	SUPPORTS IEEE STANDARD 1149.1-1990 BOUNDARY SCAN	e4	30	260	10 mm	LVT
74AVC16722DGGRE4	Texas Instruments	BUS DRIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	22	N/A	TR	1.5	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	6.3 ns	12 Amp	FF/Latches	.5 mm	85 Cel	UNIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2		R-PDSO-G64	1	3.6 V	1.2 mm	6.1 mm	Not Qualified	TRUE	1.4 V	.04 mA		e4	30	260	17 mm	AVC
74GTLPH1627DGGRE4	Texas Instruments	REGISTERED BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BICMOS	18	GTL/P & LVTTL	TR	3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	7.1 ns	100 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	2	COMMON CONTROL	R-PDSO-G64		3.45 V	1.2 mm	6.1 mm	Not Qualified	TRUE	3.15 V	50 mA			NOT SPECIFIED	NOT SPECIFIED	17 mm	GTLP
74LVCH16901DGGRE4	Texas Instruments	REGISTERED BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	CMOS	10	N/A	TR	1.8	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	7.4 ns	24 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel		DUAL	2	INDEPENDENT CONTROL	R-PDSO-G64		3.6 V	1.2 mm	6.1 mm	Not Qualified	TRUE	1.65 V		WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION		NOT SPECIFIED	NOT SPECIFIED	17 mm	LVC/LCX/Z
74SSTL16847DGGRE4	Texas Instruments	BUS DRIVER	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BICMOS	20		TR	3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 ns	20 Amp	Bus Driver/Transceivers	.5 mm	70 Cel		3-STATE		0 Cel		DUAL	2	ENABLE LOW	R-PDSO-G64		3.6 V	1.2 mm	6.1 mm	Not Qualified	TRUE	3 V				NOT SPECIFIED	NOT SPECIFIED	17 mm	SSTL
74LVTH182504APMG4	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	BICMOS	20	N/A	TRAY	3.3	3.3		FLATPACK	QFP64,.47SQ,20	17 ns	32 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	2	INDEPENDENT CONTROL	S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V	27 mA		e4	NOT SPECIFIED	260	10 mm	LVT
SN74LVTH18646APMG4	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	BICMOS	9	N/A		3.3	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	7.1 ns	64 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	2	COMMON CONTROL	S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V	24 mA		e4	30	260	10 mm	LVT
74LVTH18502APMRG4	Texas Instruments	BOUNDARY SCAN REG BUS TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	BICMOS	9	N/A	TR	3.3	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	6.8 ns	32 Amp	Bus Driver/Transceivers	.5 mm	85 Cel	BIDIRECTIONAL	3-STATE	POSITIVE EDGE	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	2	INDEPENDENT CONTROL	S-PQFP-G64	3	3.6 V	1.6 mm	10 mm	Not Qualified	TRUE	2.7 V	24 mA	SUPPORTS IEEE STANDARD 1149.1-1990 BOUNDARY SCAN	e4	NOT SPECIFIED	260	10 mm	LVT

Bus Driver & Transceivers

A bus driver is an electronic component that manages communication between different components or devices in a computer system. It serves as an intermediary between the CPU and other components, such as memory, input/output devices, and expansion cards. The bus driver receives signals from the CPU and routes them to the appropriate component based on the address and control signals provided.

The bus driver also manages the timing of data transfer between components and ensures that the data is transferred at the correct speed and in the correct format. It may also perform error checking and correction to ensure that the data is transferred accurately.

Transceivers, on the other hand, are electronic devices that transmit and receive data signals over a communication channel. They are commonly used in telecommunications, networking, and computer systems. Transceivers can be either analog or digital and may transmit data using various modulation schemes, such as amplitude modulation (AM), frequency modulation (FM), or phase modulation (PM).

In computer systems, transceivers are commonly used to transmit and receive data over network cables, such as Ethernet cables or fiber optic cables. They may also be used to transmit and receive data over wireless networks, such as Wi-Fi or Bluetooth.

Transceivers typically include a transmitter, a receiver, and a signal processing unit that modulates and demodulates the data signals. They may also include error correction and signal amplification circuitry to improve the quality of the transmitted data.