Texas Instruments Bus Driver & Transceivers 2,222

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Schmitt Trigger	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	Screening Level	No. of Bits	Translation	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Count Direction	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	No. of Ports	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
SN74F244NS	Texas Instruments	BUS DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		TTL		4	N/A	TUBE	5		50 pF	SMALL OUTLINE		6.5 ns	64 Amp		1.27 mm	70 Cel	UNIDIRECTIONAL	3-STATE		0 Cel	NICKEL PALLADIUM GOLD	DUAL	2	ENABLE LOW		R-PDSO-G20	1	5.5 V	2 mm	5.3 mm		TRUE	4.5 V	90 mA		e4	30	260	12.6 mm	F/FAST
SN74LVC16245ADGG	Texas Instruments	BUS TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		8			1.8			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		7.1 ns			.5 mm	85 Cel		3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2			R-PDSO-G48	1	3.6 V	1.2 mm	6.1 mm		TRUE	1.65 V		WITH DIRECTION CONTROL	e4	30	260	12.5 mm	LVC/LCX/Z
SN74LVTH125DB	Texas Instruments	BUS DRIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	4		BICMOS		1			3.3			SMALL OUTLINE, SHRINK PITCH		4.9 ns			.65 mm	85 Cel		3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2			R-PDSO-G14	1	3.6 V	2 mm	5.3 mm		TRUE	2.7 V			e4	30	260	6.2 mm	LVT
CVMEH22501AMDGGREP	Texas Instruments	BUS TRANSCEIVER	MILITARY	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		8		TR	3.3			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		13.8 ns	12 Amp		.5 mm	125 Cel	BIDIRECTIONAL	3-STATE WITH SERIES RESISTOR	POSITIVE EDGE	-55 Cel	NICKEL PALLADIUM GOLD	DUAL	2	COMMON CONTROL		R-PDSO-G48	1	3.45 V	1.2 mm	6.1 mm		TRUE	3.15 V	30 mA		e4	30	260	12.5 mm	VME
SN74HC244NS	Texas Instruments	BUS DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		4	N/A	TUBE	5		50 pF	SMALL OUTLINE		210 ns	7.8 Amp		1.27 mm	85 Cel	UNIDIRECTIONAL	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2	ENABLE LOW		R-PDSO-G20	1	6 V	2 mm	5.3 mm		TRUE	2 V	.08 mA		e4	30	260	12.6 mm	HC/UH
SN74HCT564N	Texas Instruments	BUS DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED		NO	1	25000000 Hz	CMOS		8			5	5	50 pF	IN-LINE	DIP20,.3	66 ns	6 Amp	FF/Latches	2.54 mm	85 Cel		3-STATE	POSITIVE EDGE	-40 Cel		DUAL	2			R-CDIP-T20		5.5 V			Not Qualified	INVERTED	4.5 V				NOT SPECIFIED	NOT SPECIFIED		HCT
74LVCHR162245ADLG4	Texas Instruments	BUS TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	2		CMOS		16			3.3			SMALL OUTLINE, SHRINK PITCH		12.5 ns	12 Amp		.635 mm	85 Cel		3-STATE WITH SERIES RESISTOR		-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2			R-PDSO-G48	1	3.6 V	2.79 mm	7.49 mm		TRUE	1.65 V	.02 mA		e4	30	260	15.875 mm	LVC/LCX/Z
HPA00719RSVR	Texas Instruments	BUS TRANSCEIVER	INDUSTRIAL	NO LEAD	16	VQCCN	RECTANGULAR	PLASTIC/EPOXY		YES	2		CMOS		2	1.5/3.3V&1.5/3.3V	TR	1.5		15 pF	CHIP CARRIER, VERY THIN PROFILE		6.3 ns	12 Amp		.4 mm	85 Cel	BIDIRECTIONAL	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	2	COMMON CONTROL		R-PQCC-N16	1	3.6 V	.55 mm	1.8 mm		TRUE	1.2 V	.016 mA	TWO SEPARATE CONFIGURABLE POWER-SUPPLY FOR PORT A AND PORT B	e4	30	260	2.6 mm	AVC
SN74AVCH2T45DCURG4	Texas Instruments	BUS TRANSCEIVER	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1		CMOS		2			1.4			SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH		5.4 ns	12 Amp		.5 mm	85 Cel		3-STATE		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	2			R-PDSO-G8	1	3.6 V	.9 mm	2 mm		TRUE	1.2 V	.02 mA		e4	NOT SPECIFIED	260	2.3 mm	AVC
SN74SSTU32864NMJR	Texas Instruments	BUS DRIVER	COMMERCIAL	BALL	96	LFBGA	RECTANGULAR	PLASTIC/EPOXY		YES	1		TTL		25	N/A		1.8			GRID ARRAY, LOW PROFILE, FINE PITCH	BGA96,6X16,20	2.7 ns	8 Amp		.8 mm	70 Cel	UNIDIRECTIONAL		POSITIVE EDGE	0 Cel	TIN SILVER COPPER	BOTTOM	2		500 MHz	R-PBGA-B96	3	1.9 V	1.4 mm	5.5 mm		TRUE	1.7 V	40 mA		e1	30	260	13.5 mm	SSTU
SN74HCS367QWBQBRQ1	Texas Instruments	BUS DRIVER		NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	YES	2		CMOS	AEC-Q100	4		TR, 7 INCH	5		50 pF	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.1X.14,20	32 ns	7.8 Amp		.5 mm	125 Cel	UNIDIRECTIONAL	3-STATE		-40 Cel	NICKEL PALLADIUM GOLD	QUAD	2	ENABLE LOW		R-PQCC-N16	1	6 V	.8 mm	2.5 mm		TRUE	2 V	.002 mA		e4		260	3.5 mm	HC
TXU0101DCKR	Texas Instruments	BUS TRANSCEIVER		GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	1				1		TR, 7 INCH	3.3		5 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	60 ns	12 Amp		.65 mm	125 Cel	UNI/BIDIRECTIONAL	3-STATE		-40 Cel	TIN	DUAL	2	ENABLE HIGH		R-PDSO-G6	1	5.5 V	1.1 mm	1.25 mm		TRUE	1.08 V	.0055 mA		e3		260	2 mm	TXU
SN54SLC8T245PWTSEP	Texas Instruments	BUS TRANSCEIVER		GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8			0.7		15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp		.65 mm	125 Cel	BIDIRECTIONAL	3-STATE		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	2	COMMON CONTROL		R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm		TRUE	.65 V	.07 mA		e4		260	7.8 mm	SLC
V62/22604-01XE	Texas Instruments	BUS TRANSCEIVER		GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	1				8			0.7		15 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		12 Amp		.65 mm	125 Cel	BIDIRECTIONAL	3-STATE		-55 Cel	NICKEL PALLADIUM GOLD	DUAL	2	COMMON CONTROL		R-PDSO-G24	1	3.6 V	1.2 mm	4.4 mm		TRUE	.65 V	.07 mA		e4		260	7.8 mm	SLC

Bus Driver & Transceivers

A bus driver is an electronic component that manages communication between different components or devices in a computer system. It serves as an intermediary between the CPU and other components, such as memory, input/output devices, and expansion cards. The bus driver receives signals from the CPU and routes them to the appropriate component based on the address and control signals provided.

The bus driver also manages the timing of data transfer between components and ensures that the data is transferred at the correct speed and in the correct format. It may also perform error checking and correction to ensure that the data is transferred accurately.

Transceivers, on the other hand, are electronic devices that transmit and receive data signals over a communication channel. They are commonly used in telecommunications, networking, and computer systems. Transceivers can be either analog or digital and may transmit data using various modulation schemes, such as amplitude modulation (AM), frequency modulation (FM), or phase modulation (PM).

In computer systems, transceivers are commonly used to transmit and receive data over network cables, such as Ethernet cables or fiber optic cables. They may also be used to transmit and receive data over wireless networks, such as Wi-Fi or Bluetooth.

Transceivers typically include a transmitter, a receiver, and a signal processing unit that modulates and demodulates the data signals. They may also include error correction and signal amplification circuitry to improve the quality of the transmitted data.