20 Clock Drivers & Buffers 59

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	No. of Inverted Outputs	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Control Type	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
49FCT806ASOG8	Integrated Device Technology		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				CMOS			5	5			SMALL OUTLINE	SOP20,.4		64 Amp	Clock Drivers	1.27 mm	70 Cel			0 Cel	MATTE TIN		DUAL			R-PDSO-G20	1				Not Qualified					e3	30	260
NB3N853501EDTG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2 ns		Clock Drivers	.65 mm	85 Cel		.03 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL			R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified		3.135 V			e4	30	260	6.5 mm	3N
49FCT805PYGI8	Integrated Device Technology		INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				CMOS			5	5			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		64 Amp	Clock Drivers	.635 mm	85 Cel			-40 Cel	MATTE TIN		DUAL			R-PDSO-G20	1				Not Qualified					e3	30	260
49FCT805SOGI8	Integrated Device Technology		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				CMOS			5	5			SMALL OUTLINE	SOP20,.4		64 Amp	Clock Drivers	1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL			R-PDSO-G20	1				Not Qualified					e3	30	260
74FCT807CTPYGI8	Integrated Device Technology		INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				CMOS			5	5			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		48 Amp	Clock Drivers	.635 mm	85 Cel			-40 Cel	MATTE TIN		DUAL			R-PDSO-G20	1				Not Qualified					e3	30	260
74FCT807CTSOGI8	Integrated Device Technology		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				CMOS			5	5			SMALL OUTLINE	SOP20,.4		48 Amp	Clock Drivers	1.27 mm	85 Cel			-40 Cel	MATTE TIN		DUAL			R-PDSO-G20	1				Not Qualified					e3	30	260
49FCT806APYG8	Integrated Device Technology	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	2		CMOS			5			5	SMALL OUTLINE		5.3 ns				70 Cel	3-STATE	.7 ns	0 Cel	MATTE TIN	0	DUAL			R-PDSO-G20	1	5.25 V					4.75 V			e3	30	260		FCT
AD805BN	Analog Devices	CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	1					5			1	IN-LINE					2.54 mm	85 Cel			-40 Cel	TIN LEAD	1	DUAL			R-PDIP-T20			5.33 mm	7.62 mm	Not Qualified					e0			25.2 mm	805
CDC208N	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	STANDARD	2		CMOS	4		5	5	50 pF	0	IN-LINE	DIP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	2.54 mm	85 Cel	3-STATE	1 ns	-40 Cel		4	DUAL	ENABLE LOW	60 MHz	R-PDIP-T20		5.5 V	5.08 mm	7.62 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	24.325 mm	208
MC100LVEP14DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			2.5	-4.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.475 ns		Clock Drivers	.65 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL		2000 MHz	R-PDSO-G20		3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4		260	6.5 mm	100LVE
MC100LVEP14DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			2.5	-4.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.475 ns		Clock Drivers	.65 mm	85 Cel	OPEN-EMITTER	.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL		2000 MHz	R-PDSO-G20	1	3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V	e4	30	260	6.5 mm	100LVE
CDC208DWR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2		CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	30	260	12.8 mm	208
CDC339DW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS		TUBE	5	5		0	SMALL OUTLINE	SOP20,.4	9 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	NICKEL PALLADIUM GOLD	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.5 mm	Not Qualified		4.75 V	85 mA		e4	30	260	12.8 mm	CDC
CDCLVC1110PW	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS		TUBE	2.5	3.3		0	SMALL OUTLINE	TSSOP20,.25	2.6 ns	12 Amp	Clock Driver	.65 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	1	DUAL		250 MHz	R-PDSO-G20	1	2.7 V	1.2 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	6.5 mm	CDC
MC100EP139DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.9 ns		Clock Drivers	.65 mm	85 Cel		.1 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL		1000 MHz	R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	100E
MC100EP139MNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	.9 ns		Clock Drivers	.5 mm	85 Cel		.1 ns	-40 Cel	TIN	4	QUAD			S-XQCC-N20	1	5.5 V	1 mm	4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	4 mm	100E
87339AGI-11LFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2					3.3	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.1 ns		Clock Drivers	.65 mm	85 Cel		.35 ns	-40 Cel	MATTE TIN	4	DUAL			R-PDSO-G20	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V			e3	30	260	6.5 mm	87339
9DB202CGLFT	Integrated Device Technology	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1					3.3			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					.65 mm	70 Cel	3-STATE	.11 ns	0 Cel	MATTE TIN	2	DUAL			R-PDSO-G20	1	3.465 V	1.2 mm	4.4 mm	Not Qualified		3.135 V			e3	30	260	6.5 mm	9DB
PCK3807AD,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			2.5	3.3		0	SMALL OUTLINE	SOP20,.4	4.5 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL			R-PDSO-G20	1	3.6 V	2.65 mm	7.5 mm	Not Qualified		2.3 V			e4	30	260	12.8 mm	3807
PCK3807ADB,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			2.5	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.5 ns	24 Amp	Clock Drivers	.65 mm	85 Cel		.35 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified		2.3 V			e4		260	7.2 mm	3807
PCK3807ADS,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			2.5	3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	4.5 ns	24 Amp	Clock Drivers	.635 mm	85 Cel		.35 ns	-40 Cel	TIN	10	DUAL			R-PDSO-G20	1	3.6 V	1.73 mm	3.9 mm	Not Qualified		2.3 V			e3		260	8.7 mm	3807
PCK3807APW,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		CMOS			2.5	3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.5 ns	24 Amp	Clock Drivers	.65 mm	85 Cel		.35 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	10	DUAL			R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.3 V			e4	30	260	6.5 mm	3807
PCKEL14D,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					2.5	-2.5/-3.3/2.5/3.3		0	SMALL OUTLINE	SOP20,.4	.94 ns		Clock Drivers	1.27 mm	85 Cel		.07 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	3.8 V	2.65 mm	7.5 mm	Not Qualified		2.375 V		NECL MODE: VCC=0 WITH VEE= -2.375V TO -3.8V	e4			12.8 mm
PCKEL14PW,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					2.5	-2.5/-3.3/2.5/3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.94 ns		Clock Drivers	.65 mm	85 Cel		.07 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	3.8 V	1.1 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VCC=0 WITH VEE= -2.375V TO -3.8V	e4		260	6.5 mm
PCKEP14PW,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			2.5	-2.5/-3.3/2.5/3.3		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.475 ns		Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VEE = -2.375 V TO -3.8 V WITH VCC = 0 V	e4		260	6.5 mm
PCKEP14PW,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1					2.5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.475 ns			.65 mm	85 Cel		.025 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	3.8 V	1.2 mm	4.4 mm	Not Qualified		2.375 V		NECL MODE: VEE = -2.375 V TO -3.8 V WITH VCC = 0 V	e4			6.5 mm
PCK3807APW,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					2.5			0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 ns			.65 mm	85 Cel		.35 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G20	1	3.6 V	1.1 mm	4.4 mm	Not Qualified		2.3 V			e4			6.5 mm	3807
PCK3807ADB,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1					2.5			0	SMALL OUTLINE, SHRINK PITCH		4.5 ns			.65 mm	85 Cel		.35 ns	-40 Cel	NICKEL PALLADIUM GOLD	10	DUAL			R-PDSO-G20	1	3.6 V	2 mm	5.3 mm	Not Qualified		2.3 V			e4			7.2 mm	3807
CDC208NSG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2		CMOS	4	TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
CDC208NSRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	2		CMOS	4	TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.3	11.7 ns	24 Amp	Bus Driver/Transceivers	1.27 mm	85 Cel	3-STATE	1 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	ENABLE LOW	60 MHz	R-PDSO-G20	1	5.5 V	2 mm	5.3 mm	Not Qualified	TRUE	4.5 V	.08 mA		e4	NOT SPECIFIED	260	12.6 mm	208
MC100EP14DTR2	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			3.3	-4.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.45 ns		Clock Drivers	.65 mm	85 Cel		.045 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20		5.5 V	1.2 mm	4.4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	100E
MC100EP14DT	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			3.3	-4.5		0	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	.45 ns		Clock Drivers	.65 mm	85 Cel		.045 ns	-40 Cel	NICKEL PALLADIUM GOLD	5	DUAL			R-PDSO-G20	1	5.5 V	1.2 mm	4.4 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e4		260	6.5 mm	100E
MC10EP139DW	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN LEAD	4	DUAL			R-PDSO-G20	1	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e0		235	12.8 mm	10E
MC100EL38DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			5	+-5		0	SMALL OUTLINE	SOP20,.4	1.05 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	-40 Cel	TIN	4	DUAL		1000 MHz	R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC100LVEL39DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	1000000000 Hz	ECL			3.3	+-3.3		0	SMALL OUTLINE	SOP20,.4	1.2 ns		Prescaler/Multivibrators	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	4	DUAL		1000 MHz	R-PDSO-G20		3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V	61 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	12.8 mm	100LVEL
MC100LVEL39DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	1000000000 Hz	ECL			3.3	+-3.3		0	SMALL OUTLINE	SOP20,.4	1.2 ns		Prescaler/Multivibrators	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	4	DUAL		1000 MHz	R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V	61 mA	NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
MC100EL14DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			5	-4.5		0	SMALL OUTLINE	SOP20,.4	.83 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	5	DUAL			R-PDSO-G20		5.7 V	2.65 mm	7.5 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC100EL13DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		ECL			5	-4.5		0	SMALL OUTLINE	SOP20,.4	.62 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	3	DUAL			R-PDSO-G20	3	5.7 V	2.65 mm	7.5 mm	Not Qualified		4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	12.8 mm	100EL
MC100EP139DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.1 ns	-40 Cel	MATTE TIN	4	DUAL		1500 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3	30	260	12.8 mm	100E
MC100EP139DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.1 ns	-40 Cel	TIN	4	DUAL		1500 MHz	R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	12.8 mm	100E
MC100LVEL37DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1		ECL			3.3	+-3.3		0	SMALL OUTLINE	SOP20,.4	.94 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	4	DUAL			R-PDSO-G20	3	3.8 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE= -3V TO -3.8V	e3	30	260	12.8 mm	100LVEL
MC10EP139DWG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN	4	DUAL			R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	12.8 mm	10E
MC10EP139DWR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		ECL			3.3	-3.0/-5.5/3.3/5.0		0	SMALL OUTLINE	SOP20,.4	.9 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	TIN	4	DUAL			R-PDSO-G20	3	5.5 V	2.65 mm	7.5 mm	Not Qualified		3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V	e3		260	12.8 mm	10E
CY2CC910OXIT	Cypress Semiconductor	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SCHMITT TRIGGER	1		CMOS			1.8	1.8/3.3		0	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	3.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel		.2 ns	-40 Cel	MATTE TIN	10	DUAL			R-PDSO-G20	3	1.89 V	2 mm	5.3 mm	Not Qualified		1.71 V		ALSO OPERATES WITH 2.5V AND 3.3V SUPPLY; CYPRS06929-1 REFFER THIS DATA SHEET FOR PACKAGE DIMENSIONS	e3	20	260	7.2 mm	2CC
CDC340DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS			5	5		0	SMALL OUTLINE	SOP20,.4	4.8 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel		8	DUAL		40 MHz	R-PDSO-G20		5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V				NOT SPECIFIED	NOT SPECIFIED	12.825 mm	340
CDC341DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS		TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V	33 mA		e4	NOT SPECIFIED	260	12.825 mm	341
CDC341DWRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS		TR	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	4.9 ns	48 Amp	Clock Drivers	1.27 mm	70 Cel		.6 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V	33 mA		e4	NOT SPECIFIED	260	12.825 mm	341
CDC337DWG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1		BICMOS		TUBE	5	5	50 pF	0	SMALL OUTLINE	SOP20,.4	9 ns	32 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.9 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	8	DUAL		80 MHz	R-PDSO-G20	1	5.25 V	2.65 mm	7.52 mm	Not Qualified		4.75 V			e4	NOT SPECIFIED	260	12.825 mm	337

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.