28 Clock Drivers & Buffers 67

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Input Conditioning	No. of Functions	Technology	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Maximum Same Edge Skew (tskwd)	Minimum Operating Temperature	Terminal Finish	No. of True Outputs	Terminal Position	Minimum fmax	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
9DB104BGLFT	Integrated Device Technology	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25			Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	8	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e3	30	260	9.7 mm	9DB
9DB104BGLF	Integrated Device Technology	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25			Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	MATTE TIN	8	DUAL		R-PDSO-G28	1	3.465 V	1.2 mm	4.4 mm	Not Qualified	3.135 V			e3	30	260	9.7 mm	9DB
CDC2536DL	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	BICMOS		3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.4		12 Amp	Clock Drivers	.635 mm	70 Cel	3-STATE WITH SERIES RESISTOR	.5 ns	0 Cel		6	DUAL	100 MHz	R-PDSO-G28		3.6 V	2.79 mm	7.49 mm	Not Qualified	3 V				NOT SPECIFIED	NOT SPECIFIED	9.525 mm	2536
9P935AFLFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			1.8	1.8/2.5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		9 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.04 ns	0 Cel	MATTE TIN	6	DUAL	125 MHz	R-PDSO-G28	1	1.9 V	2 mm	5.3 mm	Not Qualified	1.7 V			e3	30	260	10.2 mm	9P
870919BRI-01LFT	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	MUX	1	CMOS		3.3	3.3		SMALL OUTLINE	SSOP28,.25		24 Amp	Clock Drivers	.635 mm	85 Cel		.5 ns	-40 Cel	MATTE TIN	6	DUAL	160 MHz	R-PDSO-G28	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	9.9 mm	5V
870931ARI-01LFT	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3		SMALL OUTLINE	SSOP20,.25		24 Amp	Clock Drivers	.635 mm	85 Cel	3-STATE	.3 ns	-40 Cel	MATTE TIN	6	DUAL	80 MHz	R-PDSO-G28	1	3.6 V	1.75 mm	3.9 mm	Not Qualified	3 V			e3	30	260	8.65 mm	931
CDCLVD2104RHDT	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2		TR	2.5	2.5		CHIP CARRIER	LCC28,.2SQ,20	2.5 ns		Clock Drivers	.5 mm	85 Cel		.035 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	QUAD	800 MHz	S-PQCC-N28	2	2.625 V	1 mm	5 mm	Not Qualified	2.375 V			e4	NOT SPECIFIED	260	5 mm	CDC
CDCV855IPWG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	2.5	2.5	14 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V			e4	NOT SPECIFIED	260	9.7 mm	855
CDCV855PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	2.5	2.5	14 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V			e4	NOT SPECIFIED	260	9.7 mm	855
MC100H643FNG	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5,-4.5		CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC10H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5,-5.2		CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
CDCVF855PWG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	2.5	2.5	14 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.04 ns	-40 Cel	NICKEL PALLADIUM GOLD	4	DUAL	220 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V	10 mA		e4	30	260	9.7 mm	855
CDCVF855PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	2.5	2.5	14 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel	3-STATE	.04 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	4	DUAL	220 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V	10 mA		e4	NOT SPECIFIED	260	9.7 mm	855
5T905PGGI8	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	CMOS		2.5	1.5/2.5,2.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.5 ns	12 Amp	Clock Drivers	.65 mm	85 Cel		.025 ns	-40 Cel	MATTE TIN	5	DUAL	250 MHz	R-PDSO-G28	1	2.6 V	1.2 mm	4.4 mm	Not Qualified	2.4 V			e3	30	260	9.7 mm	5T
PCK2001MDB,112	NXP Semiconductors	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.5 ns		Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	150 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e4		260	10.2 mm	PCK2000
PCK2001MDB,118	NXP Semiconductors	LOW SKEW CLOCK DRIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1	CMOS		3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.5 ns		Clock Drivers	.65 mm	70 Cel	3-STATE	.25 ns	0 Cel	NICKEL PALLADIUM GOLD	10	DUAL	150 MHz	R-PDSO-G28	1	3.465 V	2 mm	5.3 mm	Not Qualified	3.135 V			e4		260	10.2 mm	PCK2000
852911AVILFT	Integrated Device Technology	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1			3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	1.7 ns		Clock Drivers	1.27 mm	85 Cel		.1 ns	-40 Cel	MATTE TIN	9	QUAD	500 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e3	30	260	11.505 mm	852911
CDCV855PWR	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	2.5	2.5	14 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	NICKEL PALLADIUM GOLD	4	DUAL	180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V			e4	30	260	9.7 mm	855
CDCVF111FNR	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	NICKEL PALLADIUM GOLD	9	QUAD	650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4	30	260	11.505 mm	111
CDCVF111FNG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TUBE	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	QUAD	650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	11.505 mm	111
CDCVF111FNRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	3.3	3.3		CHIP CARRIER	LDCC28,.5SQ	.6 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	9	QUAD	650 MHz	S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4	NOT SPECIFIED	260	11.505 mm	111
MC100E111FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.78 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.075 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e3	30	260	11.505 mm	100E
MC10E111FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel	3-STATE	.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V	e3	30	260	11.505 mm	10E
CDC111FNRG4	Texas Instruments	LOW SKEW CLOCK DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1			3.3			CHIP CARRIER		.6 ns			1.27 mm	70 Cel		.05 ns	0 Cel	NICKEL PALLADIUM GOLD	9	QUAD		S-PQCC-J28	1	3.6 V	4.57 mm	11.505 mm	Not Qualified	3 V			e4			11.505 mm	111
IDT5V993A-5QGI	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.25		12 Amp	Clock Drivers	.635 mm	85 Cel		.7 ns	-40 Cel	Matte Tin (Sn) - annealed	8	DUAL	85 MHz	R-PDSO-G28	1	3.6 V	1.7272 mm	3.9116 mm	Not Qualified	3 V			e3	30	260	9.906 mm	5V
IDT5V993A-5QGI8	Integrated Device Technology	PLL BASED CLOCK DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	STANDARD	1			3.3			SMALL OUTLINE, SHRINK PITCH					.635 mm	85 Cel		.7 ns	-40 Cel	MATTE TIN	8	DUAL	85 MHz	R-PDSO-G28		3.6 V	1.75 mm	3.9116 mm	Not Qualified	3 V			e3			9.9 mm
CDCV855PWRG4	Texas Instruments	PLL BASED CLOCK DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	DIFFERENTIAL	1		TR	2.5	2.5	14 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 ns	12 Amp	Clock Drivers	.65 mm	70 Cel	3-STATE	.05 ns	0 Cel	NICKEL PALLADIUM GOLD	4	DUAL	180 MHz	R-PDSO-G28	1	2.7 V	1.2 mm	4.4 mm	Not Qualified	2.3 V			e4	30	260	9.7 mm	855
MC100E310FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	+-5		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	8	QUAD	700 MHz	S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: 0V VCC WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100LVE111FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	+-3/+-3.8		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	11.505 mm	100LVE
MC100LVE111FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		3.3	+-3/+-3.8		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	MATTE TIN	9	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3	30	260	11.505 mm	100LVE
MC100E210FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	.75 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	0 Cel	TIN	4	QUAD		S-PQCC-J28		5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	100E
MC100H641FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H641FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H642FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H642FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns		Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H643FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	-4.5		CHIP CARRIER	LDCC28,.5SQ	5.5 ns	48 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H646FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100H646FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.4 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel	3-STATE	.5 ns	0 Cel	TIN	8	QUAD		S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	100H
MC100LVE210FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3		CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	4	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC100LVE210FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	2	ECL		3.3	-3.3		CHIP CARRIER	LDCC28,.5SQ	.9 ns		Clock Drivers	1.27 mm	85 Cel		.075 ns	-40 Cel	TIN	4	QUAD		S-PQCC-J28		3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC100LVE310FNG	Onsemi	LOW SKEW CLOCK DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		3.3	-3.3		CHIP CARRIER	LDCC28,.5SQ	.8 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	-40 Cel	TIN	8	QUAD		S-PQCC-J28	3	3.8 V	4.57 mm	11.505 mm	Not Qualified	3 V		NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V	e3		260	11.505 mm	100LVE
MC10E211FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	1.125 ns		Clock Drivers	1.27 mm	85 Cel	OPEN-EMITTER	.075 ns	0 Cel	TIN	6	QUAD		S-PQCC-J28	3	5.7 V	4.57 mm	11.505 mm	Not Qualified	4.2 V		NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V	e3		260	11.505 mm	10E
MC10E411FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL	1	ECL		5	-5.2		CHIP CARRIER	LDCC28,.5SQ	.68 ns		Clock Drivers	1.27 mm	85 Cel		.05 ns	0 Cel	TIN	9	QUAD		S-PQCC-J28		5.5 V	4.57 mm	11.505 mm	Not Qualified	4.5 V		NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V	e3		260	11.505 mm	10E
MC10H640FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	6	QUAD	135 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H641FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H641FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL LATCHED	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	6.9 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.35 ns	0 Cel	TIN	9	QUAD	65 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H642FNG	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns	24 Amp	Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28		5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H
MC10H642FNR2G	Onsemi	LOW SKEW CLOCK DRIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	DIFFERENTIAL MUX	1	ECL		5	5		CHIP CARRIER	LDCC28,.5SQ	5.75 ns		Clock Drivers	1.27 mm	85 Cel		.5 ns	0 Cel	TIN	8	QUAD	100 MHz	S-PQCC-J28	3	5.25 V	4.57 mm	11.505 mm	Not Qualified	4.75 V			e3		260	11.505 mm	10H

Clock Drivers & Buffers

Clock drivers and buffers are two electronic components commonly used in digital systems to control the timing and distribution of clock signals.

Clock drivers are electronic components that generate a clock signal and distribute it to multiple components or devices within a digital system. The clock signal is a periodic waveform that synchronizes the timing of different operations within the system. The clock driver typically amplifies and shapes the clock signal to ensure that it meets the timing requirements of the system.

Buffers, on the other hand, are electronic components that amplify and isolate signals. In digital systems, buffers are often used to distribute clock signals to multiple components without degrading the quality of the signal. Buffers can help to reduce signal distortion, noise, and jitter, which can be particularly important in high-speed digital systems.

Buffers can also be used to isolate signals and prevent interference between different components or devices. They can be particularly useful in situations where the output of one device or component could damage another device or component.

Clock drivers and buffers can be used together to distribute clock signals throughout a digital system while maintaining signal integrity. The clock driver generates the clock signal and distributes it to the buffers, which then amplify and isolate the signal before distributing it to the various components or devices within the system.